What is the best way to wash linoleum at home? How to clean dirt from linoleum? Tile surface cleaner

Due to its price, as well as high performance qualities, linoleum is rightfully considered the most popular floor covering. Today it is found in most homes in our country.

However, despite many positive sides Over time, the product will develop a coating that needs to be removed. How to clean linoleum in the kitchen correctly? In order to long years he delighted his owners with his original appearance. There are some tricks here.

If you want the flooring to last for many years, then you should properly and competently care for the material. Here are some recommendations on how to extend the life of linoleum:

• After laying the material, it is recommended to carry out cleaning only in a dry way for the first time.
• Protection from mechanical impact in the form of a rubber mat. This will avoid getting in contact with scratching elements: tiny pebbles, grains of sand and others.
• Special attachments, rubber pads or protective stickers should be placed under heavy furniture or household appliances. This will avoid the formation of dents from the load.
• Take care to minimize exposure to ultraviolet radiation on the canvas. Otherwise, rapid discoloration is guaranteed.
• Dragging heavy objects over the surface of the material is prohibited. Otherwise, it is better to replace the product.
• Before wet cleaning, remove any debris.
• Do not allow smoldering cigarettes, matches, alcohol solutions, or shoe polish to come into contact with the surface of the material.
• Any contamination must be removed immediately. Stubborn dirt is more difficult to remove.
• You should avoid using linoleum on balconies and other open areas. Thermal changes negatively affect the material.
• It is recommended to strengthen the frequently traveled area with emulsion or polymer spraying.

How to properly care for linoleum - prevention

Unlike other floor coverings, linoleum is absolutely not afraid of water. Therefore, daily wet cleaning, even several times a day, will not harm him.

Here are some tips for care:

• Use warm water.
• Use highly soluble cleaning products.
• Rinse the solution of soap and water thoroughly.
• It is not recommended to use scratching agents.

• Alkaline solutions, as well as soda. Their active components increase the fragility of the product.
• Chemical mixtures, solvents, bleaches. They discolor the material and also destroy its structure.
• Abrasive substances. Scratches the surface of the coating.

How to clean linoleum in the kitchen

Drying oil

The main advantage of the drying oil solution is that it does not easily clean the product, but also gives it shine. The method of application is very simple. It is necessary to wipe the material with the mixture and then polish it with a silk cloth. As a result, the canvas will be prevented from cracking and will gain shine. This process should be repeated once every 3-4 months.

Mastic

The surface of the material can be easily treated with mastic. It is even sold in a regular hardware store. Its cost is small. However, you still need to use it carefully, using it in measured quantities.

Household bleach

A whole bunch of professional bleaches, for example “Mr. Proper” or others, will allow you to clean the floor covering. Use this product with caution and try to avoid contact with skin and eyes. After cleaning, it is recommended to ventilate the room. Directions for use are usually indicated on the label.

How to clean linoleum in the kitchen?

Small children usually leave behind various pieces of art. A melamine sponge will allow you to get rid of drawings from felt-tip pens. More complex stains will be removed by gasoline, turpentine or kerosene. These are very toxic products, so caution should be exercised. Literally a drop of solution on a cloth made of soft fabric and you can wipe the flooring.

For ink stains, it is better to use pumice or fine sandpaper. You should not be overzealous, otherwise holes may appear. Then treat the cleaned area with a silk cloth with linseed oil.

If oil, shoe polish, wax or pieces of fresh asphalt come into contact with the surface, use gasoline as a cleaning agent. The technology is simple. First, use a spatula to remove the frozen piece of wax. Wipe the area with a cloth moistened with gasoline and thoroughly rinse the area with water.

Cleaning embossed linoleum

May God help you with a washing vacuum cleaner! This unit will greatly simplify the cleaning process. What to do if it is missing or it is broken? In this case, you will have to use cleaning products like Sif or Silit. The old fashioned way on all fours.

We wipe off the brilliant green

An old stain of brilliant green or iodine will most likely have to be covered with something. It is quite possible to remove fresh ones with your own hands. To do this, you will need to remove excess impregnating material. Then wipe the stain with nail polish remover. We repeat several times.

The next method is based on a 10% ammonia solution, liquid chlorophyllipt or using a camphor alcohol-containing solution. Dampen the cotton wool and gently wipe the stain. Then you need to wash thoroughly but gently with soapy water.

Dirt

Smoke, grease and other household dirty stains often form in the kitchen, especially around the stove. The settling dust only enhances the effect. Delete old deposits You can use ordinary powder.

It should be diluted in warm water, after which we add a cleaning agent or vodka. This will help the decking shine again.
It is not recommended to use bleach or bleach solutions. They will discolor the material. For periodic disinfection, it is recommended to dilute water with alcohol or vinegar.

Removing rust and grass

A solution of water and bleach will help here. The proportion is 10 to 1 in favor of water. Rub the stains thoroughly with the mixture. Then wash with soap and water, it must be warm. Then wipe this area with lemon juice.

Cleaning linoleum after repair

Before starting repairs, it is recommended to cover the floor with newspaper or some reliable film or canvas. If this has not been done then problems arise. Step one: carry out dry cleaning, sweep away all the debris with a stiff brush. Then wet.

Wipe thoroughly with a rag soaked in a solution of potassium permanganate, acetone or vinegar several times. The primer is removed with a spatula or nail polish remover. We remove very difficult, stubborn stains with a stiff brush and a cleaning agent, such as White Spirit.

White traces from whitewashing are cleaned using dishwashing detergent in several passes. Adhered polyurethane foam is cleaned with water. When it gets wet, just remove it with a knife or spatula.

Bringing back the shine

We dilute water and milk in a ratio of 1 to 1. Wipe the floor covering. Then we wipe the material dry.

We take a special polish or polymer mastic. We apply thin layer. Thin is formed protective layer from mechanical impact. The procedure should be repeated no more than once every 2-3 months.

Every month it is necessary to rub the product with drying oil or linseed oil. Apply a little mixture to the wool base, rub it into the flooring, and then wipe with a dry cloth.

A simple old-fashioned way. Boil the potatoes and wait for the resulting broth to cool. Then we wet a rag with it and wipe the linoleum.

Video instruction

How to clean linoleum in the kitchen? How to do this correctly? These are the questions you were looking for answers to in this article. Now it has become clear how quickly, and most importantly, efficiently clean the floor covering from any contamination in a short time.

To keep linoleum in in its original form, when cleaning it, you should follow some rules. It must be remembered that this material does not tolerate well high temperatures and is not very resistant to mechanical stress. To wash linoleum, do not use abrasive cleaning compounds, as they can leave scratches on the surface, and undiluted chlorine-containing products, which can damage upper layer coating or discolor it.

1 General cleaning rules

Before you start washing the linoleum, clean it of dust using a vacuum cleaner or broom. Afterwards, prepare a soap solution: add no warm water to a bucket a large number of liquid soap or a special liquid for washing linoleum. Wipe the floor with a rag soaked in soapy water, and then rinse off any remaining product. clean water. It is not recommended to leave soap stains on the coating - they can destroy the top layer of the material.

To add shine to the linoleum after washing, you can rub it with a sponge or rag soaked in milk, linseed oil or drying oil, and then wipe the remaining liquid dry. In places where the coating is subject to intense load (kitchen, corridor, hallway, organizations with high traffic), it can be treated with a special polymer composition, which forms a protective layer on the material.

If after cleaning there are stains or stubborn dirt left on the surface, you can use special chemical compounds or folk remedies for cleaning.

In order not to spoil the linoleum, trying to clean it of various contaminants, you cannot use:

• alkaline solutions - they make the coating brittle;
• chlorine bleaches - such compositions wash the paint out of it;
• dry cleaning powders, abrasives - they leave microcracks in the material, into which dirt subsequently gets clogged.

7 ways to clean your microwave from grease and carbon deposits

2 Fighting stubborn dirt

If washing with a soap solution does not bring the desired result, then use other, more effective means. There are special liquids designed for cleaning linoleum, however effective formulations can also be prepared at home.

For stubborn dirt use:

1. 1. Alcohol solution. Add 1 part vodka or alcohol to a bucket with 5 parts water. Dissolve a handful of laundry soap shavings in the liquid. Soak a rag in this water, wring it out, and treat the contaminated surface with circular movements. This product is good for getting rid of grease stains in the kitchen.
2. 2. Kerosene or gasoline. You can try to remove stubborn stains using these products. However, you should act carefully so as not to damage the surface of the linoleum. Soak a cotton pad with the liquid and use gentle movements without pressure to treat the stains. Afterwards, wash these areas with a soapy sponge and a damp cloth.
3. 3. Sauerkraut. Effective folk remedy against strong pollution – juice sauerkraut. It is poured in a small amount onto the problem area, left for a few minutes and treated with a sponge. Afterwards wipe with a damp cloth.
4. 4. Drying oil. Washing dirty linoleum drying oil, you can not only get rid of old stains, but also give the coating shine. The liquid also prevents cracks from appearing on the material, so it is recommended to use it once every few months for preventative cleaning. Pour a little drying oil onto a clean rag and wipe the contaminated areas with it. Afterwards, take a piece of flannel and polish the treated areas.
5. 5. Mastic. For a new coating, use a colorless liquid; it is better to clean the old one with a dark one. In addition to removing old dirt, mastic makes various defects in the material less noticeable, protects it from dust, dirt, water and mechanical damage. Use the product according to the instructions on the package.
6. 6. Melamine sponge. Get rid of stubborn stains without using household chemicals A melamine sponge will help. The stain is not wetted big amount water and rub gently with a sponge. You need to wear gloves to avoid damaging the skin of your hands, and after cleaning, wipe the floor well to remove sponge particles.
7. 7. Floor cleaning products “Mr. Proper”, “Mr. Muscle” and others. The liquid is added to a bucket of warm water according to the proportions specified by the manufacturer. Soak a rag in the solution, wring it out to remove excess water, and wipe the contaminated areas. Wash off with clean water.
8. 8. Compositions for cleaning tiles. Light linoleum can be washed with a tile surface cleaner. It helps get rid of dirt and grease. Directions for use are indicated on the packaging.

Rough linoleum can be cleaned of old dirt using a slab cleaner (for example, Adriel). It is diluted in warm water before use.

How to clean a silicone phone case from yellowness and dirt?

3 Washing after repair

Clean linoleum from construction dust, white plaque and other contaminants remaining after repairs, you can do this:

1. 1. First, the floor is cleared of large debris, after which it is vacuumed or swept.
2. 2. Drops of putty are removed using a plastic spatula.
3. 3. Stains from oil paint and traces of tape are wiped off vegetable oil. A small amount of liquid is poured onto the stain and left for a short time. Then they are treated with a sponge. Greasy marks are washed off with warm water and dishwashing liquid. Footprints water-based paint wipe with a damp cloth.
4. 4. Leftovers polyurethane foam removed in two stages. First cut off the main part sharp knife. Then a wet rag is applied to the remaining foam. After an hour, when the mass swells, it can be easily scraped off with a non-sharp object. In difficult cases, when this method does not help, use Dimexide or special remedy for removing foam, which can be found at a hardware store.
5. 5. Use warm water to clean the floor from whitewashing. Wipe the surfaces several times, constantly rinsing the cloth. For greater effectiveness, add a little potassium permanganate or vinegar to the water.
6. 6. Wipe the linoleum dry with a clean cloth.

How to clean the seams between tiles from dirt, grease and mold: expert advice

4 Removing stains of various origins

The sooner you start removing the stain, the easier it will be to get rid of it. Old contaminants penetrate deep into the material, and it is not always possible to completely cope with them.

Before trying to wash linoleum using any method, the cleaning composition should be applied to an inconspicuous area of ​​the coating and wait. If no negative changes follow, you can treat the stain.

Old linoleum with a lot of stains can be washed with water containing ammonia(10 liters will require 2 tablespoons).

Getting rid of stains on linoleum is difficult, but possible. When cleaning, do not rub the coating too hard to avoid damaging it, and after treatment, be sure to wash off any remaining product with a clean, damp cloth.

Given that proper care linoleum can serve the owner for many years. Therefore, it is necessary to use products that can create a protective layer. In addition, you need to know how to properly remove dirt from such a coating.

• Tamara GLOBA To break out of lack of money once and for all, in 2018, make it a rule to carry with you...

1 How to care for linoleum?

1. 1. After installation, it is advisable to lubricate the coating with polish. This will create an additional protective layer, which will increase the durability of the material.
2. 2. Several times a year it is recommended to treat linoleum with linseed oil or drying oil. This will protect the floor covering from cracks.
3. 3. You can put a mat on the floor that will prevent debris and dust from accumulating.
4. 4. If there is furniture on the surface, then it is necessary to use special pads for its legs.
5. 5. Any contamination that appears should be removed immediately. Stubborn dirt is much more difficult to remove.

Save the flooring perfect condition Regular cleaning will help. It is advisable to wash linoleum every day, but at least once a week. When performing daily cleaning, you must adhere to the following rules:

1. 1. First, be sure to sweep or vacuum the surface. Since abrasive particles remaining on the floor, when wet, can seriously damage the coating.
2. 2. For daily washing linoleum should be used warm soapy water or a special cleaning agent. To make it shine, add 2 tablespoons of vinegar to the water.
3. 3. It is necessary to wring out the cloth thoroughly, as excess moisture can damage the coating.

For everyday cleaning you should not use products with high content alkalis and abrasive particles. Aggressive substances can make the coating brittle.

Easy home cleaning with a Karcher steam mop

2 Cleaning methods

In household chemical stores you can find special products for cleaning linoleum. However, pollution can be dealt with at home using improvised means.

How to clean laminate flooring from plaque and dirt after renovation?

3 Eraser

Often black streaks left by shoes appear on the flooring.

A regular eraser will help remove them. They need to rub the contaminated area. When the streaks disappear, you should wash the linoleum with soapy water.

This method will be effective if the shoe marks are not too old. Therefore, cleaning must be done regularly.

Which mop should I choose for cleaning laminate flooring?

4 Vodka

To remove grease stains from linoleum in the kitchen, you can use soap and dishwashing detergent. To do this you will need:

• in 1 liter of water, dilute 1 glass of vodka and 1 teaspoon of dishwashing liquid;
• moisten a soft cloth with the resulting solution;
• wipe dirty floor coverings;
• Rinse the floor with clean water and wipe with a dry cloth.

This recipe is more suitable for light linoleum.

5 Vinegar

If marks from a pen appear on the linoleum, they should be sprinkled with table salt and moistened with vinegar. After 5 minutes, the contamination should disappear.

You can also remove ink with sulfur. To do this, the marks must be cleaned with a match head moistened with water.

6 Tile cleaning liquid

The tile cleaner is also suitable for cleaning linoleum.

Cleaning steps:

• apply the product to contaminated areas;
• wipe the coating with a soft cloth;
• Wash the floor with clean water and wipe with a dry cloth.

This product can be used to clean light-colored linoleum.

7 Gasoline, kerosene, turpentine

You can get rid of old contaminants using purified gasoline, kerosene or even turpentine. These substances act effectively, but quite aggressively. Therefore, they should be used carefully, protecting your hands with rubber gloves.

These products will also help if you need to wash the linoleum after repairs. Solvents do an excellent job of removing traces of glue, paint, whitewash or primer.

Procedure:

• moisten a cotton pad with the chosen product;
• wipe away stubborn stains;
• Immediately wash the surface with warm soapy water.

Solvents can ruin linoleum and discolor the design. Therefore, it is advisable to test their effect on residual material or on an inconspicuous area of ​​the coating.

8 Bleach

Bleach will help remove stubborn dirt from linoleum. You can use a special product designed for cleaning linoleum or take regular Whiteness. But chlorine can harm the material, so the solution must be very weak.

Instructions:

• mix Whiteness with water in a ratio of 1:10;
• moisten a soft cloth with the prepared solution;
• treat contaminated areas;
• Wash the floor with clean water and wipe the coating dry.

Bleach can remove rust, mold, grass, paint and felt-tip pen stains from linoleum.

9 Mastic

At a hardware store you can purchase mastic that can cope with various contaminants. The surface must be treated with this product carefully so as not to damage the material.

The use of mastic increases the resistance of the floor covering to mechanical damage, negative impact water and ultraviolet radiation, and also gives a glossy shine.

It is advisable to clean new linoleum using colorless mastic. And the old one - with a dark-colored product, which will hide small cracks and other damage.

10 Drying oil

Linoleum should be treated with drying oil several times a year. This product removes even stubborn dirt well. In addition, it restores the original color of the material and creates a protective film that prevents mechanical damage.

Apply drying oil to a soft cloth and polish the floor covering with it.

11 How to remove brilliant green and iodine?

Sometimes iodine accidentally gets onto the surface. You can remove such stains from linoleum using potato starch.

Algorithm of actions:

• moisten the contaminated area;
• sprinkle starch onto a damp cloth;
• put it on the stain and leave for 10 minutes;
• after the specified time has elapsed, check whether the contamination has been removed;
• If the iodine has disappeared, the floor should be washed with warm soapy water.

You can also get rid of iodine stains using regular potato peelings. The concentration of starch in them is lower, so the peels are placed on the contaminated area for 20 minutes.

Green stains are especially noticeable on linoleum. It will not be possible to remove them with conventional linoleum cleaning products, since they have water base. To remove brilliant green, you need to use alcohol-based products.

Procedure steps:

• blot the spilled greenery with a dry cloth, moving from the edges to the center of the stain;
• mix potassium permanganate and acetic acid in a ratio of 1:5;
• apply the resulting solution to the contamination;
• the green stuff should turn pink and then brown;
• after this, the mixture is washed off with warm water;
• Next, you need to pour hydrogen peroxide on the stain.

As a result, the green stain will become discolored.

Instead of the listed products, you can use nail polish remover, camphor alcohol or ammonia diluted with water in a ratio of 1:10.

Old stains can be removed with baking soda. To do this you need:

1. 1. Wet a cloth with water.
2. 2. Sprinkle a little baking soda on it and apply it to the contaminated area for 1 minute. The exposure time can be increased to 20 minutes if the stain does not disappear.
3. 3. When the brilliant green has completely come off, you need to wash the floor with clean water and apply to the surface protective agent.

Getting rid of old dirt on linoleum is not easy. This material is susceptible to damage from the use of aggressive agents and high temperatures. Therefore, it is necessary to wash the floor covering regularly.

Linoleum is a very practical and easy-to-maintain coating. That is why it has become so popular and is often installed in apartments and offices. This material is recommended for use where floors are heavily soiled, as it is the easiest to remove all stains from. But not everyone knows how to wash linoleum correctly. Unknowingly, irreparable harm can be caused to this coating. Especially when it comes to novice owners. Let's figure out how to clean it properly.

How to clean linoleum

Linoleum care

Linoleum differs from other types of flooring in that it has a lot of advantages: low price, practicality, durability, a large number of color variations, durability. Thanks to this, it is used not only in apartments, but also in offices, shopping centers and even in some industrial premises.

Polishing linoleum

But even with such a large number of advantages, linoleum cannot be called an ideal coating. He is afraid of excessive heat, and also, due to his chemical composition, sometimes reacts sharply to the effects of aggressive chemical substances(for example, solvents). Some types of linoleum do not have a top protective layer (as a rule, these are coatings household type) and because of this they can quickly dry out.

Natural wood-look linoleum

Advice! If you purchased budget linoleum that does not have a protective layer, then it is recommended to periodically treat it with a special polish, which will create a layer of protection on its surface from external influences.

There are special polishes to give linoleum shine.

When improper care due to the material, linoleum can quickly lose its appearance and demand a replacement. Let's consider the basic rules for caring for it:

• In the first days after laying the coating, it is recommended to clean it only using the dry method;
• It is recommended to put special pads on furniture legs or place a backing underneath them, which will avoid the appearance of dents on the linoleum;

Furniture leg pads

• Some types of linoleum fade quite quickly in direct sunlight. Therefore, you need to take care of some shading of the coating;
• You cannot drag heavy things along linoleum - marks will remain on it, and you can tear the coating;
• linoleum can be burned, so hot objects should not fall on it;
• linoleum cannot be laid on unglazed balconies and loggias, as it reacts too sharply to temperature changes.

Damaged linoleum

Important! The durability and long service life of linoleum depend not only on its proper care, but also on the class and quality of the material that was used for installation in a particular room. The higher the class and the thicker the coating, the more long time it will serve without any complaints.

Floor and linoleum cleaner

As for cleaning a room where the floors are covered with linoleum, it is also important to follow a number of rules to avoid damage to the coating. The following tips should be followed:

• before washing linoleum, it is important to clear it of small debris and sand using a vacuum cleaner or broom - then small particles will not act as an abrasive under the rag and will not spoil the surface of the material;
• after wet cleaning, the coating is wiped dry to avoid streaks;
• some aggressive chemicals cannot be used to wash linoleum;
• cleanly washed linoleum in a place where there is a lot of foot traffic is best coated with a protective emulsion;
• Water does not harm the material, except when it is hot. Only warm water is used to wash linoleum floors;

Washing water should not be hot

• the coating cleaner, if it is concentrated or powdered, must be well dissolved in water;
• It is important to wash off some compounds (for example, those made from soap) from the coating with clean water;
• It is better to remove stains caused by substances on the floor immediately before they become embedded in the coating;
• Do not use abrasives or rough materials to clean complex stains.

Dry cleaning of linoleum

Advice! To make linoleum shine, after cleaning it can be rubbed with a cloth dipped in milk. After this, the surface is wiped with a dry woolen rag.

What absolutely cannot be used to wash dirt off linoleum?

It has already been said above that a number of compositions and solutions cannot be used to clean linoleum. They can cause irreparable damage to the coating. When washing linoleum, you should avoid:

• mixtures prepared on the basis of alkalis, soda– they make the coating brittle. They can be used extremely rarely, in small areas and only in case of special contamination that other means simply cannot cope with;
• solvents and bleaches– they not only destroy the structure of the coating, but also destroy its brightness;
• abrasive brushes– they are dangerous because under their influence a certain number of microcracks can form in the coating;
• chlorine-containing compounds– spoil the appearance of the material.

Valo Clean cleaning products

Advice! You can try an unfamiliar linoleum cleaning product in an inconspicuous corner of the room. If there is no negative reaction of the coating to the impact, then all floors can be washed with the product.

How to clean dirty linoleum?

You can buy a linoleum cleaner in a store, or you can prepare it yourself or carefully look at what’s on the shelves at home - maybe among the products you’ve already purchased there is something that can be used to clean this type of flooring? The simplest option is a regular soap solution. It is enough to dissolve a little grated soap in a bucket of water - and it’s gentle, but effective remedy to remove dirt from PVC material ready. And if you add a little more vodka to the solution at the rate of 200 g per 1 liter of water, the linoleum will shine. In this case, washing is carried out in a circular motion.

Soap solution

Regular dishwashing detergent can easily remove grease deposits on the coating. First, the fat is wiped off with a paper napkin or soft cloth, and then washed off with a few drops of the composition.

Sometimes linoleum is so dirty that simple remedies cannot cope with the stains that have formed on it. In this case, it is recommended to use kerosene or gasoline. But you need to act carefully, because these are not the best compositions for cleaning linoleum. It is important to thoroughly rinse off the remaining cleaning compounds from the surface of the linoleum.

Ordinary drying oil copes well with stubborn dirt. It also allows you to improve the appearance of the coating, restore it to its former brightness, and prevent the risk of cracks. Drying oil is easy to work with - it wipes the entire surface of the linoleum, and then sands it with a dry soft cloth. The frequency of repetition of the procedure is once every six months.

A special mastic, which should be used strictly according to the instructions, will also help restore the coating to its former chic. For a freshly laid coating, light mastic is used, and for an old one, dark mastic is used. The product is able to hide some defects in linoleum, and also protects it from a number of external influences.

There are other compounds that can be found on store shelves and used to clean and renew linoleum. The main thing is to use them strictly according to the instructions and not exceed the dosage.

Washing dirty linoleum

How to get rid of stains

Often the linoleum itself turns out to be quite clean, but stains from various pollutants form on it. In this case, you should not fill the entire floor with a cleaning composition - it is enough to remove only the stain itself. Let's see which products are suitable for this or that type of pollution.

How to remove stains from linoleum

Table. Fighting stains on linoleum.

Green stains on linoleum

If on linoleum big number old stains, then washing the floors with soapy water with a couple of spoons of ammonia added to it (per bucket of water) will help to overcome them.

Mold on linoleum

Cleaning linoleum after repair

The largest amount of dirt on the floor always forms after cosmetic repairs in room. To avoid tedious cleaning, it is recommended to cover the floors with film or at least newspaper before painting and other work. But many neglect this measure, believing that linoleum can be washed well anyway.

Initially, all large debris is collected, the floors are swept with a brush or vacuumed. The dried putty is scraped off with a spatula, the whitewash is simply washed off with water. In this case, the floor surface will have to be washed several times, periodically changing the water, otherwise stains will appear on the floor.

Removing dried putty

Heavily ingrained stains from building materials can be removed using white spirit. After all debris and all stains have been removed, the surface of the linoleum can be washed with water with the addition of vinegar or potassium permanganate in a small amount.

Polyurethane foam is the most difficult to remove, but it can be dealt with. To begin with, the bulk of it is removed using a sharp knife. Next, place a wet rag on the stain and leave it there for a while. The foam should soften and come off easily. If this does not help, then you will have to purchase a foam remover in the store or the drug Dimexide, sold through the pharmacy chain.

Polyurethane foam on linoleum

Dimexide

Sunflower oil will help dissolve paint stains. After this, the floors are washed with soapy water. If the paint has eaten into the coating, then the easiest way is to put a patch in this place by cutting out the stained area.

Ways to protect linoleum

You can cover the surface of linoleum with metallized varnishes

It is better to place special pads under narrow furniture legs. They will significantly reduce the load and reduce the level of mechanical impact on linoleum

Before entering a house or apartment with linoleum, you should put a grate or a hard mat. This will protect the flooring from sand, dust and dirt

How to restore shine to linoleum?

Of course, over time, even well-cared for linoleum ceases to shine. Because of this, the floors no longer look beautiful; their appearance leaves much to be desired. However, the material can be restored to its former chic by using several means:

• wiping the surface with a 1:1 solution of milk and water;
• use of polishes, mastics;
• wiping the floor with potato broth;
• rubbing with drying oil or linseed oil.

Linoleum can be restored to its former shine

Wet cleaning procedure

Dry cleaning of linoleum is the usual removal of debris using a broom or vacuum cleaner. However, it will not remove stuck debris, old stains and dirt. Therefore, wet cleaning of the coating is very important and should be carried out regularly.

Step 1. The first step is to dry clean the surface. To carry it out, use a vacuum cleaner or a brush with a dustpan. All the garbage that can be collected is collected - sand, wool, small stones. The doormat is shaken out, debris collecting under and around it. The corners and joints between the floor and the wall along the baseboards are well swept.

Dry cleaning

Step 2. When dry cleaning is completed, the floors are wiped with a damp cloth soaked in water or a detergent prepared in accordance with the instructions. For daily cleaning Cleaning compounds do not need to be used - it is enough to use them once a week so that the floors are not exposed to excessive chemical exposure. The floors are washed in a circular motion, starting from the wall farthest from the exit. It is important not to leave unwashed areas.

Wet cleaning

Step 3. Joints, cracks, gaps, if any, on the floor surface are cleaned of debris using a soft brush.

Soft brush

Step 4. If the floors have been washed using cleaning products, then they must be rinsed with clean water. Or rather, they are wiped with a cloth soaked in clean warm or cold water.

Repeated wet cleaning

Step 5. The final stage is polishing the floor and drying it with a clean, dry and soft cloth. This will avoid the appearance of streaks.

The floor is wiped with a soft dry cloth

Step 6. If necessary, a caring or protective agent - polish or mastic - is applied to the surface of the linoleum floor.

Cleaning is finished

Video - How to clean linoleum

Using all the above tips, you can quickly and easily put your linoleum flooring in order. Fortunately, the material is truly unpretentious and can easily return to its former beautiful appearance if it is cleaned correctly.

Linoleum is one of the affordable and practical floor coverings. It is used in residential and non-residential premises- from the kitchen to the nursery. In general, caring for the material is not difficult, but washing linoleum after repair work or from stains of various origins it is more difficult. The choice of means and methods must be approached responsibly, since some of them can severely damage the coating.

How to clean linoleum after repair work?

Sometimes there is no need to change the floor covering, but housewives may find it difficult to remove traces of repairs. To simplify the task, before starting work, the floor can be covered with film and secured with tape to the baseboard. They should be removed only after all dusty work has been completed, otherwise a large amount of dirt will stick to the glue, which will be difficult to remove.

From cement, whitewash and putty

After renovation, white marks from construction materials often remain on the floor. You can solve the problem as follows:

1. First, sweep the floor to remove any abrasive particles that could damage the finish.
2. Carefully scrape off the frozen putty with a spatula.
3. Add a couple of tablespoons of salt and a little grated laundry soap to warm water. Wash the linoleum with the prepared solution.
4. Change the water and add a little potassium permanganate to it to get a light pink solution. Wipe again.
5. Wipe the flooring dry.
6. To make linoleum shine, rub it with a woolen cloth dipped in linseed oil or drying oil.

It is better to wipe the primer immediately with a damp cloth, otherwise you may need to use special products. For example, you can remove traces of primer with a solvent, but first check its safety on the remaining material or in an invisible place.

From paint

You can remove paint from linoleum if it is not ingrained with vegetable oil. Follow these simple steps:

1. Add a few drops of vegetable oil to the paint.
2. Wait a couple of minutes for it to soften.
3. Then wipe with a cloth or the hard part of a washcloth.
4. Wash the floor with warm soapy water.

Dried paint is more difficult to remove. White spirit can cope with it, but it must be used carefully, as it can damage the coating. Soak a cotton pad in the solvent and wipe the stain. When finished, oil the floor.

From polyurethane foam

Due to its excellent adhesion to any surface, polyurethane foam is difficult to remove. It is advisable to remove traces immediately, before the material has time to harden. If the moment is missed, carefully cut with a sharp knife top part material. Then use a special solution for removing polyurethane foam. You can find it in a hardware store or market. Use the product strictly according to the instructions, do not increase the holding time.

Note! Do not scrape off foam with hard brushes or sharp objects. It is not recommended to use acetone or other aggressive substances for removal.

How to clean dirty linoleum?

To make dirty linoleum shine clean again, you can wash it with special detergents. If you're not a supporter chemicals, when washing floors, add soap shavings to warm water, but it is better not to use powder. Its abrasive particles may leave scratches. In the kitchen, greasy stains can be washed off with dishwashing detergent. First, wipe the stains with a damp cloth, then add a drop of detergent and wash with a cloth again. Folk remedies will also help restore the attractiveness of the floor covering.

Interesting video about removing stains at home:

Vodka

Use alcohol like this:

1. Dissolve a few drops of dishwashing detergent in a liter of warm water. You can replace it with shavings of laundry soap.
2. Add a glass of vodka.
3. Soak a soft cloth in the prepared solution and wipe the linoleum with it, paying attention to dirty places.
4. Afterwards, wash the floor with clean water.

Using this method, the linoleum in the kitchen is well washed from traces of grease. Vodka washes away dirt well even from surfaces with relief.

Kerosene

You can get rid of stubborn dirt with a weak solution of kerosene. Add just a couple of spoons of this substance to a bucket of water. Rinse the floor covering with the prepared solution. Eliminate bad smell You can use clean water to which you should add a little vinegar.

To restore the attractiveness of old linoleum, it can be washed with a solution of milk and water (1:1 proportions) or cleaned with special mastics that are sold in stores.

Note! When cleaning, do not use abrasives. Avoid using bleach, turpentine, solvents and other aggressive substances unless absolutely necessary.

How to remove stains?

Stains of various origins may appear on linoleum. To combat them, choose a suitable folk remedy.

Deep cleaning - video:

Shoe marks

U front door Black streaks from shoes often appear. You can remove them with a regular office eraser. You just have to rub it problem area with an elastic band.

Pen ink

The paste from the pen should be rubbed gently with fine-grained paper. The main thing is not to overdo it so that there are no traces of scratches. Then, rub the area with linseed oil. Using the same principle, you can scrub the handle with a pumice stone.

Rust

You can remove a rust stain lemon juice. The best alternative is bleach. It is allowed to use very weak solution(1 tablespoon per bucket of water).

Felt pen or marker

If children live in the house, marker marks on the floor are not uncommon. On light-colored surfaces they are especially noticeable. To remove them, soak a small piece of cloth or cotton wool in hydrogen peroxide and rub it over the problem area. This method can even remove permanent markers.

Vodka is also used to remove felt-tip pens. Dilute it in warm water with a small amount of detergent added.

Paint for shoes

Fresh traces of shoe paint can be easily removed with a solution of detergent or soap. If the substance has become embedded in the coating, wipe the stain with hydrogen peroxide. Instead of an antiseptic, use gasoline or kerosene, but with caution. First, check their interaction with linoleum in an invisible place.

Printer ink

If ink from a cartridge spills on the floor, carefully wipe it with solvent, and then immediately rinse with warm soapy water. To restore shine, rub the floor with oil.

Zelenka and iodine

If iodine or brilliant green gets on the floor covering, you can solve the problem in several ways:

1. Mix baking soda with water to make a paste. Place it on the stain and leave it for a while. Carefully remove the baking soda and rinse with clean water.
2. Dilute potassium permanganate in acetic acid. You should get a bright pink solution. Soak a rag in it and apply it to the stain. Leave for a few minutes. Remove any residue with hydrogen peroxide.
3. Saturate a rag with nail polish remover. Place it on the spilled iodine or brilliant green and leave for 20 minutes. Remove the cloth and wash the floor.

7 ways to remove brilliant green stains - video:

Note! To remove pink spots from Fukortsin, just sprinkle them with tooth powder. It can also be used to remove green paint stains.

Try to remove any stains that appear immediately. Substances that have penetrated into the material are more difficult to remove. Choose the most safe methods removing stains and dirt so that linoleum serves you for a long time and does not lose its attractive appearance.

Linoleum is practical, inexpensive, and easy to lay on the floor. A wide range of colors, patterns and even surface structure will allow you to choose such a coating for any room in the house. But most often we find it in the hallway and in the kitchen, that is, in the rooms where pollution appears most quickly. Even this resistant material can quickly lose its attractive appearance, becoming covered with stains, cracks, scratches and abrasions. What to do to avoid this and extend the life of the linoleum coating will be discussed in this article.

A few words about linoleum and the features of its operation

The word “linoleum” comes from the Latin linum - linen, linen and oleum - oil. Nowadays it is mainly made from polymer materials, practical and inexpensive, thanks to which it has a lot of advantages:

• resistance to humidity, temperature, and many mechanical influences;
• ease of maintenance during operation;
• low price;
• ease of installation;
• durability;
• high heat and sound insulation properties.

So popular and universal material could not go unnoticed by optimizers, and now there are several types of linoleum on the market, divided by manufacturing method.

1. Natural linoleum is durable, wear-resistant, and environmentally friendly. It has fire resistance and antistatic properties. Located in a higher price position relative to other types.
2. Polyvinyl chloride linoleum (PVC) is the most common and cheapest of all types, very practical and easy to maintain. The only disadvantage that can be noted is that when low temperatures becomes brittle and loses its plasticity.
3. Glypthal or alkyd linoleum is inferior to PVC due to its greater fragility: cracks often appear on it. This type is not worth taking for the kitchen and hallway, but it is well suited for the bedroom.
4. Linoleum relin, or rubber, is plastic and waterproof. It consists of two layers, the total thickness of which is from 3 to 6 mm.
5. Colloxylin linoleum is made from nitrocellulose, which provides the coating with flexibility and moisture resistance, while at the same time imparting a characteristic shine. This type is not fire-resistant, so it has no place in the kitchen.

Linoleum is also divided into 2 types according to the presence or absence of a base. The coating without a base consists of several layers and is highly wear-resistant. There is a wide range of colors and patterns. The base material can be of two types:

How does the indoor microclimate affect linoleum?

Linoleum flooring is so versatile that it can be installed in any room, be it an apartment, a cottage or outbuildings. The service life of the material and its appearance will directly depend on operating conditions, including temperature and humidity indoors, that is, its microclimate. These characteristics can vary greatly depending on the time of year.

The main enemies of linoleum

First of all, let’s figure out what products cause damage to linoleum and put them away.

If you have difficult-to-clean stains on your flooring, it’s best to use the tips below.

Learn how to properly care for linoleum

Wet cleaning is a necessary step to keep your home clean. And although linoleum does not require such careful handling as some floor coverings, there are certain rules for cleaning it.

Which mop is best to use?

The mop is very convenient to use when cleaning floors. But since linoleum can be easily scratched, you should carefully consider the choice of this device.

1. There should be no protruding hard elements on the cleaning surface of the mop that could cause scratches. Ideally, it should be covered with a rubber gasket or a layer of soft cloth.
2. It is advisable to get two mops: wide and narrow. With the help of the first one you can easily tidy up large rooms, and the second one will be useful for cleaning narrow rooms and hard-to-reach places.
3. PVA mops have now become very popular, combining ease of use and thoroughness in removing dirt. A hard foam sponge is attached to their washing surface, which when interacting with water becomes soft and does not scratch the surface. The mop is also equipped with a spin mechanism, which means you no longer have to bend over and get your hands dirty.
4. If you have linoleum with an anti-slip coating, we recommend using a model with plastic bristles. It perfectly removes dirt, but does not harm the coating. It is better if the mop has a non-retractable handle so that you don’t have to put extra pressure on it when cleaning.

   Mop with plastic bristles - the best choice for cleaning linoleum with anti-slip coating

How to get rid of a specific odor

The unpleasant odor of new linoleum is caused by the substances used in its manufacture. They are released from the pores open along the cut line, mixing with air molecules. The sensation is not the most pleasant, but usually the smell disappears on its own after about a week. This process can be sped up if you don't have time to wait.

How to wash linoleum to make it shine

Over time, your flooring may become dull, even if you wet-clean it daily. But I really want the linoleum to shine like new. You can return it to its former freshness and radiance using the recommendations.

Video tutorial: how to renew tarnished linoleum

How to clean linoleum in the kitchen

The kitchen is the most visited place in the apartment. And due to the specifics of the room, the floors in it are most often contaminated. Contamination can be caused by:

• tea and coffee;
• spilled sugary drinks;
• juices

In addition, you can leave black streaks with your shoes or spill iodine on the floor while treating a cut. And if children like to hang out in the kitchen, then the linoleum will turn into a canvas for a future work of art, and you will have to wipe off traces of ink and felt-tip pens.

1. Old stains from coffee or tea, if they are in an inconspicuous area, are best left untouched. But if they are in a visible place, you will have to remove them using gasoline or kerosene. Wipe stains very carefully as these substances are harmful to the finish. Try not to go beyond the dirt to prevent a faded stain.
2. If you didn't wipe away greasy food stains immediately, ammonia will help get rid of them.
3. You can also use dishwashing detergent. Dilute a very small amount of the substance in water (1-2 tablespoons per bucket) and wash the entire floor. This will help you get rid of both oily and sugary juice and soda stains. There is no need to overdo it so that you don’t have to deal with washing away soap stains later.
4. Black streaks from shoes can be easily wiped off with a regular eraser.
5. Wipe iodine stains with camphor alcohol until they disappear completely.
6. Only fine sandpaper can remove ink and felt-tip pen from linoleum. Gently rub it onto the stain without going beyond it. When the dirt disappears, polish the treated area with a piece of wool cloth.

Note! Whatever product you use, first test it on a small, inconspicuous area. If the surface deteriorates during processing, it will not be noticeable.

Linoleum in the kitchen is most often subject to mechanical damage and contamination

Cleaning the floor after renovation

Preventing trouble is often easier than correcting its consequences. Before you start renovating a room with linoleum, cover the entire floor with newspaper. This way you will protect yourself from subsequent lengthy and labor-intensive cleaning. But if the renovation has already been completed and there are piles of garbage on the linoleum-covered floor, start with dry cleaning.

Can I use a steam mop (steam cleaner)

When cleaning linoleum, a steam cleaner can become indispensable because it is very convenient. To prevent steam from damaging the surface of the linoleum, you need to lower its temperature by moving the steam regulator to position 2 or 3. Some models are equipped with special attachments, including a mop. It will help you clean hard-to-reach places: under the bed, behind cabinets, in corners.

Note! Washing vacuum cleaners are also great for cleaning linoleum. But before you start work, make sure the integrity of the floor covering and the tightness of the joints. Otherwise, water will get under the linoleum and cause it to swell and cause a lot of problems with the floor.

By the way, if you have ribbed or porous linoleum on the floor, then you literally need a steam cleaner or a washing vacuum cleaner with this function. Experience shows that washing this type of coating with water is useless. Dirt gets firmly clogged into the pores and hollows.

Some housewives use products to clean stoves or wash floors, applying them for 5–10 minutes and then scrubbing with a brush. This is a very long and labor-intensive process. If you decide to lay linoleum with a non-standard coating, it is better to immediately take care of purchasing a steam generator or washing vacuum cleaner, which will save you a lot of time and effort. Remember that these types of linoleum get dirty quite quickly, and if in living rooms 1 cleaning per week may be enough, then in the hallway and in the kitchen you will have to wash the floor daily.

When choosing a floor covering, many people prefer linoleum. At an affordable cost, such material demonstrates fairly good performance characteristics. However, its resistance to mechanical, chemical and high-temperature influences remains to be better. As a result, even before purchasing, you should find out how to wash linoleum from dirt so as not to damage the top layer. By following certain recommendations, you can ensure a long service life of the laid coating.

Contaminants should be removed

How to maintain the appearance of linoleum?

In order for the flooring to retain its original appearance longer, it should initially be properly cared for. Linoleum intended for household use, as a rule, is made from raw materials with average performance. On its surface there is often no protective layer that can prevent premature damage to the laid material.

Attention! Buying a more expensive coating will cost more, but maintaining it will be much easier, and its service life will increase.

When purchasing regular linoleum for household use, it is advisable to treat the surface with polish immediately after installation. This will allow the formation of a fairly thin protective layer, giving the linoleum additional durability.

Advice! To protect linoleum from premature cracking, it is worth lubricating the entire floor surface with natural linseed oil or drying oil a couple of times a year. Most often this is done using a regular sponge and a dry rag.

TO additional ways Protection of floor coverings from mechanical damage should include:

• Laying a mat that will prevent small debris and dust from causing mechanical damage to the floor covering.
• The use of special “socks” made of felt or fabric on furniture legs.
• Preventing contact of linoleum with alcohol-containing products and lipstick, which, in case of accidental contact with the surface, can leave stains that are difficult to remove.
• Prompt removal of stains, since stubborn stains are much more difficult to remove.
• Carefully move heavy objects. Dragging them may leave deep scratches on the surface.

Daily cleaning

Every day, when starting to wash the floor, you should thoroughly sweep or vacuum the entire floor surface. This will remove abrasive particles, which, if wet, can much more damage the protective layer of linoleum.

Linoleum should be washed with warm water, adding a certain amount of soap solution. You can also use a special detergent, just make sure first that the manufacturer recommended its use to remove dirt from linoleum.

Advice! If you want to add the shine characteristic of the flooring material, add 2 tbsp to a bucket of water. spoons of vinegar. This solution should be used when washing off the soap solution that was used to remove dirt.

When performing wet cleaning, carefully twist the rag. Excessive moisture can cause water to seep into small cracks. Over time, cleaning with copious amounts of water will cause the top layer to peel off.

When performing daily cleaning, you should avoid using concentrated alkaline substances and ammonia. Due to their excessive aggressiveness, they can cause the coating to become brittle. Abrasive products can also cause premature replacement of floor coverings. Small particles that get on the surface can not only scratch it, but also dry out the base material. As a result, linoleum becomes brittle. Bleach often causes discoloration of materials.

Removing difficult stains with special means

Stubborn dirt from the surface of linoleum can be removed using various means. The most effective industrial products include:

• drying oil;
• mastic;
• household bleach.

Drying oil

To clean linoleum using drying oil, you should perform the following manipulations:

• Wipe the entire surface with the prepared composition.
• Gently polish the linoleum with a clean silk cloth.
• Repeat all over again in a few months.

Drying oil not only allows you to remove stubborn dirt from the surface, but also restores the color of the floor covering, preventing the appearance of cracks. You just need to choose the most suitable composition for a particular floor covering.

Mastic

This composition is easy to purchase at any hardware store. He is accessible means, with the help of which many decide to wash a wide variety of stains. When working with mastic, some caution should be observed. It is important to follow the proportions recommended by the manufacturer. Otherwise, instead of cleaning the floor covering, you may end up with additional problems.

Advice! It is better to clean new linoleum using colorless mastic. For the old one, it is worth purchasing a dark composition, which will hide the defects that inevitably appear after a certain period of use of the floor covering.

After treating the floor surface with mastic, a protective film, which has such positive properties as:

• Wear resistance. As a result, the resistance of the base material to various wear processes increases.
• Mechanical resistance, reducing the risk of damage to the flooring material.
• Resistant to water.
• Characteristic shine.
• Resistant to sunlight.

Household bleach

When choosing a suitable product, it is imperative to take into account the characteristics of the base material. Before purchasing household bleach, you should make sure that the manufacturer allows its use on stubborn dirt from the surface of linoleum. At the same time, it is important to comply general recommendations manufacturer. The best option is to check the composition on the remains of linoleum. Treating a small piece of the material will ensure that the bleach does not reduce the brightness of the linoleum.

Important! Given the characteristics of household bleach, cleaning should be done with gloves, carefully observing all safety precautions.

Work order:

• Household bleach is diluted in the proportions recommended by the manufacturer.
• The prepared composition is applied to the surface to be treated.
• Residues are removed with clean water.
• The surface is wiped dry.

Advice! In order to exclude harmful effects composition on the body, after cleaning the apartment should be ventilated.

We use folk remedies

Everything that has become embedded in the surface of linoleum is often washed off not only with the help of special means, but also by using substances that, it would seem, are intended for completely different purposes. Such compositions are present in almost every home. You just need to know how they can be used. As a result, the costs for general cleaning will be minimal.

Soap and vodka

If linoleum is laid in the kitchen, greasy stains often form on its surface, which can be very difficult to get rid of. However, such contamination can be washed off relatively easily using a soap solution with the addition of a certain amount of vodka. This composition is most often used to clean flooring in light colors.

To clean the floor covering, follow these steps:

• Prepare a solution: a glass of vodka and 1 teaspoon of dishwashing detergent are diluted in a liter of water.
• Using a soft cloth, rub the resulting composition into the most contaminated areas.
• Remains of the product are thoroughly washed off with clean water.
• The floor covering is wiped dry.

Detergent

All oils eat into linoleum fairly quickly. If, while cooking, a certain amount of fat accidentally appears on the surface, you should remove all of it as quickly as possible. Oil can not only deteriorate the appearance of the flooring, it also makes the floor very slippery, which significantly increases the risk of falls for people living in the house.

Attention! Processing should only be carried out small areas to prevent damage to the protective layer of the floor covering.

To remove grease stains, perform the following manipulations:

• Using dry paper napkin or towels to remove as much fat as possible.
• Prepare a solution by adding a few drops of the product to warm water.
• Using circular movements, remove any remaining fat from the surface.
• Wipe the floor dry.

Advice! If the oil has already penetrated deep enough into the base material, the contaminated area should be wiped with turpentine before applying the soap solution.

Tile cleaner

This composition will allow you to restore freshness to light-colored flooring that has greasy stains on it. To remove dirt, the tile surface cleaner is diluted according to the instructions. All existing dirt is thoroughly wiped off. Remains of the product are removed with water. The surface itself is wiped dry.

Gasoline/kerosene

Such compositions require special care during application. Both gasoline and kerosene can cause the destruction of linoleum. They are indispensable when it is necessary to remove stains of food coloring, felt-tip pen, coffee and gouache from the surface. To remove stains, a rag is soaked in the mixture, which is then applied to the stain.

Advice! Considering the aggressiveness of the product, it is advisable to test its effect on the material of a specific composition on the remains of linoleum or in an inconspicuous area.

Thus, having excellent performance characteristics, linoleum imposes certain requirements on the care procedure. It is important to know which products you should avoid using at home. This will make your home much cleaner and more comfortable. At the same time, the service life of the floor covering will not decrease.

To maintain linoleum in its original form, you should follow some rules when cleaning it. It must be remembered that this material does not tolerate high temperatures well and is not very resistant to mechanical stress. To wash linoleum, do not use abrasive cleaning compounds, as they can leave scratches on the surface, and undiluted chlorine-containing products, which can damage the top layer of the coating or discolor it.

General cleaning rules

Before you start washing the linoleum, clean it of dust using a vacuum cleaner or broom. Afterwards, prepare a soap solution: add a small amount of liquid soap or a special liquid for washing linoleum to a bucket of warm water. Wipe the floor with a rag soaked in soapy water, and then rinse off the remaining product with clean water. It is not recommended to leave soap stains on the coating - they can destroy the top layer of the material.

To add shine to the linoleum after washing, you can rub it with a sponge or rag soaked in milk, linseed oil or drying oil, and then wipe the remaining liquid dry. In places where the coating is subject to intense load (kitchen, corridor, hallway, organizations with high traffic), it can be treated with a special polymer composition, which forms a protective layer on the material.

If after cleaning there are stains or stubborn dirt left on the surface, you can use special chemical compounds or folk remedies for cleaning.

In order not to spoil the linoleum, trying to clean it of various contaminants, you cannot use:

• alkaline solutions - they make the coating brittle;
• chlorine bleaches - such compositions wash the paint out of it;
• dry cleaning powders, abrasives - they leave microcracks in the material, into which dirt subsequently gets clogged.

Fighting stubborn dirt

If washing with a soap solution does not bring the desired result, then use other, more effective means. There are special liquids designed for cleaning linoleum, but effective compositions can be prepared at home.

For stubborn dirt use:

1. 1. Alcohol solution. Add 1 part vodka or alcohol to a bucket with 5 parts water. Dissolve a handful of laundry soap shavings in the liquid. Soak a rag in this water, wring it out, and treat the contaminated surface with circular movements. This product is good for getting rid of grease stains in the kitchen.
2. 2. Kerosene or gasoline. You can try to remove stubborn stains using these products. However, you should act carefully so as not to damage the surface of the linoleum. Soak a cotton pad with the liquid and use gentle movements without pressure to treat the stains. Afterwards, wash these areas with a soapy sponge and a damp cloth.
3. 3. Sauerkraut. An effective folk remedy against severe pollution is sauerkraut juice. It is poured in a small amount onto the problem area, left for a few minutes and treated with a sponge. Afterwards wipe with a damp cloth.
4. 4. Drying oil. By washing dirty linoleum with drying oil, you can not only get rid of old stains, but also give the coating shine. The liquid also prevents cracks from appearing on the material, so it is recommended to use it once every few months for preventative cleaning. Pour a little drying oil onto a clean rag and wipe the contaminated areas with it. Afterwards, take a piece of flannel and polish the treated areas.
5. 5. Mastic. For a new coating, use a colorless liquid; it is better to clean the old one with a dark one. In addition to removing old dirt, mastic makes various defects in the material less noticeable, protects it from dust, dirt, water and mechanical damage. Use the product according to the instructions on the package.
6. 6. Melamine sponge. A melamine sponge will help you get rid of stubborn stains without using household chemicals. The stain is moistened with a small amount of water and gently rubbed with a sponge. You need to wear gloves to avoid damaging the skin of your hands, and after cleaning, wipe the floor well to remove sponge particles.
7. 7. Floor cleaning products "Mr. Proper", "Mr. Muscle" and others. The liquid is added to a bucket of warm water according to the proportions specified by the manufacturer. Soak a rag in the solution, wring it out to remove excess water, and wipe the contaminated areas. Wash off with clean water.
8. 8. Compositions for cleaning tiles. Light linoleum can be washed with a tile surface cleaner. It helps get rid of dirt and grease. Directions for use are indicated on the packaging.

Rough linoleum can be cleaned of old dirt using a slab cleaner (for example, Adriel). It is diluted in warm water before use.

Washing after repair

You can clean linoleum from construction dust, white deposits and other contaminants remaining after repairs as follows:

1. 1. First, the floor is cleared of large debris, after which it is vacuumed or swept.
2. 2. Drops of putty are removed using a plastic spatula.
3. 3. Oil paint stains and tape marks are wiped off with vegetable oil. A small amount of liquid is poured onto the stain and left for a short time. Then they are treated with a sponge. Greasy marks are washed off with warm water and dishwashing liquid. Traces of water-based paint are wiped off with a damp cloth.
4. 4. Remains of polyurethane foam are removed in two stages. First, cut off the main part with a sharp knife. Then a wet rag is applied to the remaining foam. After an hour, when the mass swells, it can be easily scraped off with a non-sharp object. In difficult cases, when this method does not help, use Dimexide or a special foam remover, which can be found in a building supplies store.
5. 5. Use warm water to clean the floor from whitewashing. Wipe the surfaces several times, constantly rinsing the cloth. For greater effectiveness, add a little potassium permanganate or vinegar to the water.
6. 6. Wipe the linoleum dry with a clean cloth.

Removing stains of various origins

The sooner you start removing the stain, the easier it will be to get rid of it. Old contaminants penetrate deep into the material, and it is not always possible to completely cope with them.

Before trying to wash linoleum using any method, the cleaning composition should be applied to an inconspicuous area of ​​the coating and wait. If no negative changes follow, you can treat the stain.

Old linoleum with a lot of stains can be washed with water with the addition of ammonia (2 tablespoons per 10 liters).

Getting rid of stains on linoleum is difficult, but possible. When cleaning, do not rub the coating too hard to avoid damaging it, and after treatment, be sure to wash off any remaining product with a clean, damp cloth.