Technical characteristics and areas of application of estima porcelain stoneware. Technical characteristics and areas of application of estima porcelain stoneware Estima porcelain stoneware characteristics

Estima porcelain tiles are produced at one of the largest enterprises in Russia, which is focused on producing high-quality and varied tiles for exterior finishing buildings.

ZEstima Ceramica plant in Noginsk started industrial production in 2001.

2002 - the company begins production of polished porcelain tiles.

2005 - the third and fourth production lines are launched at the plant in Noginsk. The production volume reaches 8 million sq.m. in year.

2006 - Another polishing line is launched, as well as the production of rectified ceramic granite.

2010 - A new site starts on the basis of the Samara Ceramics Association, expanding annual production to 14 million m2. The equipment fleet is expanding, the latest Italian printing and glazing machines are being purchased.

The further development of the enterprise is associated with the expansion of the product range and the release of new collections. Estima represents the most diverse range among Russian manufacturers, allowing not to limit the imagination of customers and architects. Below are the types of ceramic granite that are acceptable for use in finishing ventilated facades. Possible sizes 30x30, 30x60, 60x60 or 60x120 mm:

1. Unpolished porcelain tiles

Venezia- inspired by Venetian architecture, reminiscent of the old walls of Italian houses: VZ01 and VZ02.

Creative- represented by one article - CV01, combining three different textures.

Urban Bricks- imitating brickwork: UB01, UB02, UB03, UB04 and UB05.

Iron- aged metal. It is impossible to determine with the naked eye what is in front of you: a steel sheet with traces of oxidation and rust, or a porcelain stoneware slab. Names: IR01 and IR02.

Taste- "dense" wood: TS01, TS02, TS03, TS04, TS05 and TS06.

Sherwood- classic English parquet made of light oak: SW01 and SW02.

Vintage- unpainted worn batten: VN01 and VN02.

Antica- ancient Italian motifs natural stone yellow and sand colors: AN01, AN02, AN03, AN04 and AN05.

Jazz- porous structure of sandstone: JZ01, JZ02 JZ03 and JZ04.

Limestone- yellow shell rock LM01.

Mixstone- pronounced mixed pattern rock: MX01 and MX02.

Energy- collection with imitation of a single-color cut of rocks: NG01, NG02, NG03, NG04, NG05 and NG06.

Olimpia- quartz array: OL01.

Pietra- masonry sandstone: PT01 and PT02.

Strong- texture of natural granite. The rough surface only enhances the effect, and six textures - SG01, SG02, SG03, SG04, SG05 and SG06 - allow you to choose the desired option.

Stone- technical unglazed porcelain tiles with relief: SN01, SN02, SN03, SN04 and SN08.

Country- clay relief: CT01, CT02, CT03, CT04 and CT05.

Hard- technical, with the texture of granite rock: HD01, HD02, HD03 and HD04.

Fabric- textile structure: FB01 (gray), FB03 (beige), FB04 (blue), FB06 (black).

Fusion - modern collection with a unique texture combining stone, wood and metal: FS01, FS02 and FS03.

Old Bricks- with an aged brick pattern: OB00, OB02, OB03, OB11, OB12, OB21, OB22, OB3, OB31, and also OB41.

Loft- with rough cement surface: LF00, LF01, LF02, LF03 and LF04, which are a set fawn and dark tones with the structure of natural concrete.

Mild- “soft” series with smoothed relief natural stone red-brown tones: MI01, MI02, MI03 and MI04.

Traffic Decor- with a pattern of imprinted “wallpaper” textures: TD01, TD02, TD03 and TD04, mainly in gray shades.

Traffic- with the texture of aged plaster in gray shades: TF01, TF02, TF03 and TF04.

Sand- structure of pressed sand: SD01, SD02, SD03 and SD04.

2. Porcelain tiles with the possibility of producing polished and unpolished surfaces And

Bolero- texture of light natural stone: BL01, BL03, BL04 and BL05.

Capri- pronounced texture of Mediterranean stone in fawn shades. Consists of four colors: CP01 CP02, CP03 and CP04.

Polaris- marble in cool white shades. Article - PL01.

Rich- the structure of the stone cut in the form of water stains: RH01, RH02, RH03 and RH04.

Marmi- imitation of medium-density rock texture: MR01 and MR02 fawn tones, MR03 green, MR04 (red-brown) and MR05 (black marble).

Rainbow- monocolor dyed in the mass, that is, homogeneous: RW001 (super white), RW01 ( Ivory), RW03 (light grey), RW031 (beige), RW032 (dark grey), RW033 (gray-greenish), RW034 (dark grey), RW04 (brown), as well as RW041 (dark beige), RW06 ( dirty green), RW061 (green-beige), RW08 (light brown), RW09 (blue), RW091 (blue-gray), RW092 (dark blue), RW010 (gray-black), RW15 (bright beige ), RW151 (light yellow), RW152 (yellow-orange), and also RW61 (swamp).

Standard- Estima porcelain tiles, from which the glorious history of the brand began. Salt-pepper texture. Bright hues: ST01, ST02, ST03, ST04, ST05, ST07, ST101, ST102, ST117, ST15, ST17. Dark shades: ST011, ST016, ST06, ST08, ST09, ST10, ST11, ST116, ST16.

Trend- another classic with a natural stone structure with increased hardness and wear resistance: TR01 (light), TR02 (light brown), TR03 (dark), TR04 (blue), TR05 (brick), TR06 (light brown), and also TR07 (gray).

Silk- rock cutting: SK01, SK02, SK03, SK04, SK05 and SK06.

3. Facade ceramic granite with polished surface

Duna- relief, with sand dune tones: DN02, DN04, DN07 and DN08.

Chambord represents a mosaic pattern black and white marble, the tile segments in which are arranged in a herringbone pattern. Article number CB01.

Palace New- texture of aged stone with a predominance of light brown tones: PC01, PC02, PC03 and PC04.

Elegant New- luxurious, pronounced texture of natural stone in dark tones: EL02 or EL03.

4. Glazed porcelain tiles

Quarzite- imitation quartzite: QZ00, QZ02 and QZ03. Possesses increased strength and frost resistance, which allows you to finish facades using any method of fastening.

Your Color- branded series of glazed Estima porcelain stoneware, belonging to the "monocolor" type. Your Color means “your color”, and their number fully justifies the name. Porcelain tiles in light colors: YC04, YC05, yellow - YC13, YC14, YC15, YC92, YC93; brown - YC16, YC17, YC27, YC28, YC29, YC43, YC44, YC45; red - YC23, YC24, YC25, YC26; YC75, YC76, YC77, YC78, YC79; blue - YC33, YC34, YC35, YC36, YC37, YC38, YC39, YC85, YC86, YC87, YC88, YC89; gray - YC52, YC53, YC54, YC55; dark - YC64, YC65, YC66; pink - YC71, YC72, YC73; orange - YC74; green - YC94, YC95, YC96, YC-97.

5. Lapatinated porcelain tiles Rust- a section of rock with metal inclusions. Presented in color RS01.

6. Satin Glatcher with natural stone texture: GL00, GL01, GL02 and GL03.

The popularity of porcelain stoneware for cladding various surfaces constantly growing. This material owes its excellent technical characteristics and the ability to use it in different conditions. Porcelain tiles Russian production Estima is undoubtedly a leader domestic market ceramic granite. Large production volumes make it possible to cover about a third of the product's needs in our country.

Possibilities of Estima ceramic granite

Specifications material and its features, such as:

wear resistance;
resistance to extreme temperatures, high and low, and its changes;
chemical resistance to aggressive substances;
mechanical strength and hardness - this is what underlies its demand

According to some characteristics, Estima porcelain stoneware (Russia) even exceeds European standards. For example, if the standard size standard has a tolerance of up to ±1.8 mm, then the standards adopted by the enterprise allow a variation of no more than ±0.5 mm.

The tiles do not wear out even when laid in rooms with high traffic and constant crowds of people. The base is polymer or silicate clays, which are initially pressed into special molds. To give greater strength, the composition is fired. This material is not fragile, it is not only difficult to break, but even quite difficult to scratch.

It is striking in its resemblance to natural granite. This is facilitated by special dyes that are added to the composition during the production process, as well as finely dispersed additives that imitate stone. The tile surface does not look featureless, it does not blow cold, so porcelain tiles for the floor can be laid in the room.

About the importance of caliber

The dimensions of the tiles after firing may vary. For example, 600×600 , according to existing standards, it has dimensions of 592.5–606. To avoid possible problems, manufacturers pack products with similar sizes into one pack, in other words, calibrate them. So,

for tiles 600x600 sizes 592.5-594.1 fall under caliber 0,
and 604.4-606.0 - for caliber 7.

The caliber is indicated on the packaging. When purchasing, you should try to buy products of the same caliber. Otherwise, you risk purchasing floor tiles different sizes.

Types of surfaces

The material is available with various types surfaces:

polished (mirror smoothness),
unpolished (natural and economical),
embossed (with anti-slip effect),
polished (matte polishing).

For example, the technical porcelain tile Estima Standard, presented in the Estima Technica collection, is matte with an unpolished surface. Thickness is 12 mm, although other manufacturers have a standard thickness of 8 mm. Thus, technical ceramic granite is resistant to a load of 400 kg without losing all its other inherent advantages. Laboratory testing showed that its strength characteristics are almost 2 times higher than those of standard 8-mm ones, the breaking load of which is 206 kg.

Externally, the surface of the tile has different structure, color and design. The texture of the samples of this brand is practically indistinguishable from natural wood, stone, metal and even leather, which allows you to realize any design fantasies.

Coloring Features

Each collection is distinguished by brightness and color saturation. This product is obtained through the use of metal oxides as dyes. During the production process, all components, including dyes, are evenly distributed throughout the entire mass of the material from which the tiles are pressed.

As a result, the finished tile, say an Estima 300x300 product, turns out to be painted over the entire mass. Even if the surface is damaged, a middle part of the same color will be visible underneath.

It is clear that surface damage in this case is hardly noticeable.

Advantages of ceramic granite

Products of this trademark distinguished by high technical and operational qualities:

durability and strength;
wear and moisture resistance;
high resistance to abrasives and temperature changes;
chemical neutrality and hygiene;
uniform color throughout the entire thickness of the material;
frost resistance.

This type of flooring is perfect for heated floors, especially since, compared to wood, it is much cooler.

Estima Collections

Bright representative of this brand - Estima Standard porcelain tiles, available in three sizes:

300x300, thickness 8 mm;
400x400 of the same thickness;
600x600 mm, thickness 10 mm.

The working material is distinguished by a wide range of colors, with a variety of shades for each color. Its design is light and laconic. The coating turns out to be practical, but effective. The texture of the product can be polished or matte. The use of these textures in combination gives a very original light reflection effect. Functionally it is quite durable and durable material, which is relevant for rooms with high loads, say, commercial or industrial facilities.

Rainbow Estima is a homogeneous monocolor material, abrasion-resistant, frost-resistant (over 200 cycles), with high hardness and minimal water absorption, almost zero. It has three available formats and nine color options.

Estima Trend porcelain tiles imitate the pattern of granite - there are large granules and clearly defined veins, which together creates a feeling of naturalness and depth of the material.

The factory also produces the unpolished Estima Chalet , imitating the texture of wood, and each tile is unique in design, just like natural board and the Stone collection, which perfectly replicates the structure of stone, the “warm” Antica, which replicates the texture of worn stone, and the “delicate” Dream, which imitates marble, etc.

Along with all its advantages, the material also has a fairly attractive price.

Estima porcelain tiles - quality material for cladding floors, walls and facades.

The variety of Estima porcelain tile collections is amazing: here you can find budget salt-and-pepper options, plain façade monocolors and rich options for natural materials: marble, wood, stone.

Porcelain tile factory with 4 production lines is located in the city of Noginsk near Moscow, where modern Italian equipment produces 8 million porcelain tiles per year! There is a reason for such a truly huge production volume; Estima porcelain tiles are really very popular.

The reason for the prevalence of this brand’s material is simple - it combination of all positive factors:

-high performance characteristics

-wide selection of colors and textures

-acceptable price.

The manufacturer Estima takes care of all consumer groups in the industrial and private sectors, producing porcelain tiles for different types of premises and for any budget.

Estima porcelain tiles are produced in three sizes: 300x300, 400x400 and 600x600. When choosing the size of porcelain floor tiles, we recommend that you be guided by the square footage of the room. For large premises convenient to use, and for medium and small ones 30x30 or 40x40.

For cladding facades, large-format porcelain tiles of monochromatic colors are traditionally used; Estima has a whole collection of monocolors called Rainbow. includes 9 colors ideal for building cladding. Bright colors and a variety of sizes will allow you to create unusual solutions.

For those who prefer the cheapest, Estima offers a collection.

The Standard collection is the most budget option and includes salt-pepper porcelain tiles in a classic range of shades. Estima Standart porcelain tiles are used mainly for flooring. The salt-pepper collection not only looks presentable, but is also very practical, since the pattern masks dirt, so it can be used even in the most trafficked areas.

For areas with increased load, the manufacturer also has a solution. Estima technical porcelain tiles can be used in car showrooms, workshops, and warehouse complexes.

It has very high strength and resistance to mechanical stress. In addition, the material has low moisture resistance and is not afraid of aggressive detergents.

Possessing high technical characteristics, you can buy Estima porcelain tiles from our company at Very attractive price . All prices in the catalog are per 1 sq.m. porcelain tiles.

You can order Estima porcelain tiles from the package. For the supply of large volumes of Estima porcelain tiles, we are ready to offer you discounts!

In addition to the classic well-known collections, Estima produces several more excellent options for finishing floors and facades. You can view the collections by clicking on the buttons at the top of the page.

Porcelain tiles gained great popularity at the end of the twentieth century. Despite the fact that 60% of its production factories are located in Italy, Estima porcelain tiles are mass-produced in Russia. Its application is very diverse, due to its technical characteristics. We will consider the properties of the material and types of use in more detail.

Porcelain stoneware facade

In the 70s of the last century, Italians created completely new material for finishing premises both indoors and outdoors. The properties and qualities of this product have won recognition from builders and finishers all over the world. It's all about its composition and production technology.

This artificial material, obtained from quartz sand, white clay, feldspar and mineral additives. Dyes for it are various metal oxides. Complex, step-by-step technology obtaining porcelain stoneware mass is determined by strict requirements for the final product. The mixing and settling shops operate according to a special system developed by Italian inventors. Next, the resulting mass is pressed under high pressure. This is necessary to destroy the smallest voids. Depending on the product, the mass is subjected to repeated compression to make the material even more durable.

Material for the manufacture of porcelain tiles

After pressing, the firing stage begins at a temperature of 1300 degrees. At this temperature, the mass fuses, and all components form a single, ultra-strong material for finishing buildings.

The entire manufacturing process is controlled using computer technology. Each stage is tracked automatically. Italian equipment is used in the production of Estima. All lines and machines were produced in the homeland of porcelain stoneware, and Italian specialists work alongside Russian engineers. All this determines high quality material.

Production technology

Specifications

Estima porcelain tiles are tested to confirm compliance with international standards. In many ways, this material exceeds the necessary European requirements several times. It has:

Wear resistance at the level of high-strength natural materials.
The ability to resist daily and seasonal temperature changes.
Highly resistant to aggressive chemical environments. At the same time, his ability to resist the majority chemical compounds higher than many natural stones.
The mechanical strength and hardness of the material allows it to be compared with high-quality granite.
Zero water absorption makes it possible to protect the façade from precipitation.
Porcelain stoneware facades are frost-resistant.
Abrasion resistance is quite high.
Unlike natural stones, the material does not have a radioactive background. This advantage decides ecological problems during construction and finishing of buildings.
The decorative properties of porcelain tiles are much higher natural material. It can be given the appearance of any stone, wood, leather or metal, or even a mixture of them.
The cost of the product is several times lower than natural stone, which has made it especially popular all over the world.
The service life of porcelain stoneware slabs is more than 50 years.

Technical characteristics of Estima porcelain stoneware

Types of Estima porcelain stoneware

Estima has numerous types, which are primarily divided according to surface type.

Glazed porcelain tiles are available in several lines:
Facade porcelain tiles with a polished surface are another type of smooth material for facade finishing. It comes in four types:
There is a wide range of materials with the possibility of producing unpolished and polished surfaces. Let's consider only a few of them, as the most popular in finishing works:
Unpolished porcelain tiles come in a wide range of series. It is used for external and interior decoration, as well as for covering floors in rooms and around the building. Here you can find both wood and stone textures:

Enterprises producing Estim try not to limit themselves to the production of standard series, but are constantly expanding the range of products. This draws attention to the material from consumers. Today you can purchase products in sizes 300x300 mm, 600x600 mm, 300x600 mm and 600x1200 mm. The most popular sizes are 300x300 and 600x600 mm. Variation in side sizes technical standards enterprises should not exceed 0.5 mm. These are the indicators that come out during the manufacture of slabs.

The caliber of the product must be indicated on the packaging of the tiles. For example, if you see a caliber 0 designation for a 600x600 mm tile, then this means dimensions 592.5-594.1. And caliber 7 implies tile sizes of 604.4-606.0. Pay attention to this when purchasing! If you purchase packages of different sizes, your tiles will not fit together tightly. It is precisely this kind of mistake that can explain the negative reviews about Estima’s supposedly different-sized tiles.

Different series of tiles have different thickness, as they differ in surface texture from 8 to 12 mm. This is also worth paying attention to when finishing different types porcelain stoneware products.

Estima slabs are painted most evenly throughout the entire volume, therefore, when joining, they do not form significant boundaries.

Estima facade slabs create a feeling of integrity of the design and structure of the facade

Areas of application of Estima porcelain stoneware

As already mentioned, porcelain stoneware slabs are used in various finishing works due to their properties.

The most durable and unpolished types are installed on floors in and around buildings. Porcelain tiles are especially often in demand in those buildings where the most intense traffic occurs: train stations, airports, shopping centers. They are used to decorate saunas and swimming pools in gyms.
This material is used in great demand when decorating a bathroom. Here they can be used to cover the floor, ceiling and walls. It does not allow moisture to pass through and is resistant to change temperature regime, which often happens in the bathroom. Its resistance to abrasion and immunity to aggressive environments is used for cladding the kitchens of restaurants and cafes.
Today, porcelain stoneware slabs are in great demand for creating ventilated facades. High strength and resistance to all external influences makes the porcelain stoneware “clothing” of the house its additional protective shell.

Application of Estima products

Facade cladding using Estima porcelain stoneware

Many builders consider Estima porcelain tiles to be the most effective facing material, and this is no coincidence. This façade will last for more than half a century without additional special care. It is not afraid of shocks, wind, precipitation, or frost. Under it you can hide uneven walls and unsightly communications. Porcelain tiles are an excellent sound insulating material. It is easy to attach even alone and is inexpensive.

It is usually used for arranging ventilated facades. The slabs themselves are equipped with special fasteners, or are mounted on clamps that press and hold the facade parts in place. in the right place. A ventilated façade involves the construction of lathing, and this type of finishing requires metal carcass. Insulation and membrane wind protection are laid under it.

Diagram of a ventilated façade with a porcelain stoneware shell

Between external cladding and the inner insulating layer is a free air corridor, thanks to which the ventilation of the outer walls is ensured. The porcelain stoneware shell of a ventilated façade is not flammable, which is very important during its operation, since fire will not be able to spread along the shell. Presentable appearance and the cost ratio will make it possible to cladding a building of any size.

The photo shows a diagram of the design of a ventilated façade with porcelain stoneware slabs. Estima slabs are fully suitable for this, as they have high technical indicators, which are necessary for such work.

Video story about Estima porcelain stoneware

Watch the video material and consolidate the knowledge you gained while reading the article.

If you decide to use Estima porcelain stoneware for cladding the facade of your home, then you may need the help of specialists. If experience and confidence allow you to do the work yourself, you will not only save money on paying for a team of finishers, but you will also be able to be proud of the highly durable, effective finishing of your home, and even done by yourself.

The use of porcelain stoneware is constantly growing, which is a consequence of its excellent technical characteristics and the possibility of use in different conditions. Beautiful appearance, bright and rich colors, imitation of other materials on a surface lined with porcelain stoneware constantly attract new supporters of the use of such material. They often choose Russian-made Estima porcelain tiles, and they are not alone in this choice; approximately a third of all demand in our country is covered with porcelain tiles of this brand.

To better understand the possibilities provided by Estima porcelain stoneware, it is necessary to touch upon its features and characteristics in more detail. These include:

wear resistance;
ability to withstand exposure to high and low temperatures and its changes;
resistance to chemically aggressive substances;
hardness and mechanical strength.

It should be immediately noted that during the production process, Estima porcelain stoneware receives technical characteristics that are better than those established by European standards.

So, if, according to the requirements of the side size standards, there is a tolerance of ±1.8 millimeters, then according to the standards adopted at the enterprise, the spread should not exceed ±0.5 millimeters. It is precisely this scatter that is mainly obtained during the production process.

About the caliber of porcelain stoneware

In light of this, it is worth mentioning immediately about such a concept as caliber. After firing, the tiles can have different sizes. Thus, according to current regulations, Estima 600x600 porcelain tiles, like tiles from other manufacturers, can have sizes from 592.5 to 606. To avoid problems for the buyer, manufacturers package tiles with similar sizes in one pack. These dimensions, by which the tiles are selected, are called caliber.

Thus, tiles with a size of 592.5-594.1 fall under caliber 0, and tiles with a size of 604.4-606.0 fall under caliber 7.

The specific caliber is indicated on the packaging and you must pay attention to it; you should buy tiles of the same caliber.

If you violate this requirement, you may end up with tiles of different sizes. It is precisely this - personal inattention and ignorance of the characteristics of the material that can explain the reviews, whether it is Estim porcelain stoneware or another manufacturer, when they talk about tiles of different sizes from different packages. This means that each of them had porcelain tiles of different calibers.

About different surface types

Porcelain tiles can be made with different types of surface. Thus, Estima technical porcelain stoneware, presented in the Estima Technica Standart collection, has an unpolished surface (matte porcelain stoneware) and a thickness of 12 mm versus the usual 8 mm from other manufacturers.

This thickness allows porcelain stoneware to withstand a load of 400 kg, while maintaining all its other inherent advantages. Best use such tiles will be used for flooring in industrial premises, workshops and garages. So, for example, if you use Estima 300x300 12 mm porcelain stoneware, Saturn ( ceramic tile For flooring from the collection of the same name) will not be able to provide coverage of the same quality.

Another feature of this porcelain tile is its unpolished surface. It, unlike polished, is less slippery, and it is best to use similar porcelain stoneware for the floor. In this case, Estima takes care of the safety of everyone who will walk on such a floor, its use reduces the likelihood of slipping.

Tiles are also available with another surface – polished. It can be used for finishing in a wide variety of cases, but it is best used for finishing walls and where the load on it will be insignificant. Only our ignorance can explain the use of a material such as Estima porcelain stoneware for finishing floors in areas of heavy traffic.

And in all other applications, Estima porcelain tiles with a polished surface serve as an excellent finishing material and allow you to decorate any room in accordance with individual requests.

About painting ceramic granite

A distinctive feature of porcelain stoneware, including Estima, is its bright and rich color. It is obtained through the use of metal oxides as dyes. During the manufacturing process, all components, including dyes, are distributed evenly throughout the entire volume of material, from which the tile is then pressed.

As a result, the finished tile, for example Estima 300x300 porcelain stoneware, is painted throughout its entire volume. Even if the surface of the tile is damaged (chip or scratch), then underneath it will be the body of the tile of exactly the same color. This makes surface damage less noticeable.

About the use of Estima porcelain stoneware

The excellent technical characteristics of porcelain stoneware already provide options for its application. Very often it is used as finishing material for floors. In any premises - industrial, residential, commercial. Especially where there is heavy traffic - at train stations, in shops, in public places etc. This use of porcelain stoneware is due to its high wear resistance, thanks to which it is able to withstand significant abrasive loads without damage.

No less often, porcelain stoneware is used as a material for wall decoration, especially in the bathroom and kitchen. In fact, there is no place in the house where porcelain stoneware cannot be used for finishing. Window sills, steps for stairs, and kitchen countertops are made from it.

Finishing steps with Estima porcelain stoneware

Very often, porcelain stoneware serves as a material for finishing building facades, providing additional protection home and reducing operating costs for its maintenance. Considering such possibilities of porcelain stoneware, everything necessary is being done so that you can buy Estima porcelain stoneware for use in a wide variety of conditions and in the most various options finishing.

It should be added that in addition to the tile itself, the manufacturer offers big choice auxiliary elements for trim such as baseboards and steps.

About Estim's collections

Estima porcelain tiles are presented on the market not as individual tiles, but big amount collections. Often, the name of the collection speaks for itself - ANTIKA, COUNTRY, TECHNICA STANDART, STANDART, etc. Each collection contains tiles of several sizes different color. Each collection has its own unique features.

For quick orientation in the diversity that is Estima porcelain stoneware, catalog finished products will be your faithful assistant. Just as a reference, please note that Estima prefers yellow, peach, pink, white and sand colors. Additionally, the size of the tiles is usually closer to medium to large.

However, this does not mean that only these colors are present in the products. Thus, in the ANTICA collection, the surface of the tile imitates an ancient shabby stone, and there is a polished and matte tiles. But the Estima porcelain stoneware standard collection offers a choice of almost all possible colors with a variety of shades. Here, for example, is what unpolished Estima St 01 porcelain tiles look like

And this is what Estima St 03 porcelain tiles look like

And this approach, which guarantees the opportunity to choose porcelain stoneware not just of different colors, but also of different shades, ensures wide demand for such products. Moreover, the price for Estima porcelain stoneware is quite reasonable and corresponds to economy class products.

Porcelain stoneware produced by the Russian company Estima is a product that meets European quality requirements and is affordable for residents of the country. Issued for them a large number of the most diverse porcelain tiles, both in color and size, with the most different surfaces and its texture.