Wooden wall border. Purpose and technique of gluing borders to wallpaper. Paper borders for wallpaper in the nursery: specific application

From our new article you will learn how to glue borders to wallpaper yourself. Wallpaper borders are produced by different types, and you can use them to give the finished look to any wallpapered or painted walls. Glue the wallpaper border along the ceiling as a cornice or as a frame around windows, doors and fireplaces. When using a border to frame elements of a room, choose borders with a pattern that does not have a designated direction, because otherwise, if the design is glued upside down, it may spoil the impression.
Many wallpapers have borders whose colors or patterns are complementary to those of the wallpaper. You can create your own border by cutting narrow strips from wallpaper. In a number design solutions the curbs have corner elements, matching corner panels. To make corner pieces, cut additional pieces of wallpaper or border and adhere them to the border using vinyl-to-vinyl adhesive.

To determine location curb, cut curb strip one to two meters long. Attach the strip to the wall with adhesive tape different places to clearly see how the location of the border will affect the proportions of the room. For example, a border pasted along the top of a wall draws the eye to the ceiling. A border located at the level of the paintings can force high ceiling appear lower if you use the curb as decorative element- slats to protect walls from damage by the backs of chairs; the center of the border should be located at a distance from the floor equal to 1/3 the height of the room.

When gluing borders to wallpaper, start from inconspicuous places, for example, from front door from the side where the hinges are. This is important because Typically, the pattern mismatch occurs at the junction of the last section of the border with the first. You can install a border in the form of a continuous strip around doors and windows using the "overlap" method, making cuts at the joints at an angle of 45° ("migrant").
Wallpaper borders are sold by the meter or in rolls with border winding lengths ranging from 5 to 7 m. To determine how long you will need, measure where the border will go. Keep in mind that part of the borders will be used to combine patterns and, in addition, there will be waste when trimming. For each miter joint, add at least twice the width of the curb plus 5 cm.

How to glue a border to wallpaper?

If you are going to stick the border on the wall, but not under the ceiling or above the baseboard, then using a level, draw a thin line along the room with a pencil at the desired height. Cut the first strip of curb. Prepare the strip using border adhesive and following the directions for preparing wallpaper strips without pre-applying adhesive.

Start gluing from the least visible place, leaving an allowance of 1.5 cm on the adjacent wall. Have a helper hold the folded border while you glue it and smooth the border with a smoothing brush.
In inner corner leave a strip of allowance of approximately 0.5 cm and bend it over. Glue the border strip on the adjacent wall; trim the border sharp knife.

Straighten and smooth the folded strip in the corner. Press the curb against the wall. If necessary, apply seam adhesive to the overlapped seam.
Where the seams hit the middle of the wall, overlap the border strips so that the pattern on both strips matches. Cut through both strips with a sharp wallpaper knife, helping yourself wide spatula. Fold back the strips and remove any scraps. Press the strips against the wall. After half an hour, roll the seam with a roller and wipe with a sponge.

Cut the border near the door and window frames, holding it at outer edge trim with a wide spatula and cutting off the excess with a sharp wallpaper knife. Wipe the border and trim with a damp sponge.

How to connect borders miterally

Glue the horizontal strips of the border, extending them beyond the corners at a distance no less than the width of the border strip. Glue the vertical stripes of the border, covering the horizontal stripes with them.

Place a straight edge where the border strips intersect and use a sharp knife to cut through both layers. Fold back the strips and remove any scraps.
Press the curb against the wall. After half an hour, lightly roll the seam. Wipe the glue off the border with a damp sponge.

By combining wallpaper with borders, you can create decorative wall panels. Use panels to separate large walls into smaller areas or arrange them to highlight paintings or mirrors.
To create a balanced appearance, the panels on the wall are spaced evenly apart, leaving slightly more space at the bottom than at the top. Start your layout by first determining where the most prominent panels will be. This will help to make a sketch of the room on graph paper, and the positions of windows, doors and furniture should be reflected here. Also take into account the rapport on the wallpaper so that you can combine the pattern.
Make several mock-up panels from thick packing paper or cardboard and tape them to the walls according to your layout. Outline them to mark the location for the actual panels.

How to make wallpaper panels

Determine the size and location of the wallpaper panels by cutting and attaching thick packing paper to the wall with adhesive tape. Using a pencil and level, trace the outline of the paper on the wall. Measure and write down the dimensions for each of the panels.

Using a square to ensure that each corner is 90°, cut a strip of wallpaper to size for the center of each panel. Prepare the strip as directed.
Straighten top part folded strip. Press it lightly against the wall, aligning the edges along the contour. Using your palms, press the strip into place. Use a brush to press and smooth the top of the strip and check that no air bubbles.

Flatten the bottom of the strip. Using your palms, place the strip along the contour. Use a brush to press and smooth the strip and check that there are no air bubbles left.
Cut and glue all the remaining strips, matching the pattern and joining the seams end to end. After half an hour, roll the seams. Use clean water and a damp sponge to remove all glue from the wallpaper and the wall. Prepare the border using border adhesive and following the directions for preparing unadhesive wallpaper panels.

Starting from the least visible place, apply the border strips; Pasting is carried out clockwise. Butt joint the inner edges of the border with the edges of the panel. Cut corners at 45°. After half an hour, roll the outer edges of the border and seams.

Once you've finished papering a room, check to see if there are any areas that need touching up while the job is still in progress. Special attention Pay attention to the seams: If you roll the seams by applying too much pressure to the roller or before the glue has set, you may squeeze too much glue out from under the edges of the wallpaper. These edges will look tightly rolled while they are still wet, but will swell as soon as the wallpaper dries. Reapply glue to the seam between the edges as shown.
Using strong side lighting, check whether there are any air bubbles, unglued areas or other defects under the wallpaper. Stand next to the wall and look along its entire length against the light.

How to get rid of air bubbles

Using a sharp wallpaper knife, make a narrow slit in the bubble. If there is a pattern on the wallpaper, cut along the line of the pattern so that it is invisible.

Insert the tip of the adhesive tool through the cut and apply a small amount of adhesive to the wall under the wallpaper.
Gently press the wallpaper to re-stick it. During this operation, use a clean, damp sponge to press down the cut sides and wipe off excess glue.

How to patch wallpaper

Attach a piece of wallpaper matching the pattern and color to the damaged area with adhesive tape so that the pattern matches.

Holding the blade of the wallpaper knife at a 90° angle to the wall surface, cut out both layers of wallpaper. If the wallpaper pattern is made up of clear lines, the cut is made along these lines to make it invisible. For less clear patterns, the incision is made along a wavy line.

How to secure a seam

Remove the patch with pieces of adhesive tape, and then the damaged section of wallpaper. Apply glue to the back side of the patch - paste it over the damaged area so that the: "-slot matches." Wipe the patched area with a damp sponge.

Lift the edge of the wallpaper and insert the tip of the glue applicator under it. Squeeze the adhesive onto the wall and carefully press the edges of the seam. Wait half an hour and then lightly roll the seam with a rolling roller. Wipe the seam with a damp sponge.

From our article you learned how to glue a border to wallpaper, apply a patch to wallpaper, etc. I hope our article was useful to you.

Carrying out the next redecorating, the owners are probably not planning to update so much appearance finishing the rooms, how much to create a unique design so that it looks beautiful and corresponds to the purpose of the room.

Sometimes a technique used in wall decoration is a combination of several types of wallpaper. Its use serves different purposes. For example, such as: hide imperfections in wall surfaces, disproportionality in the sizes of walls and ceilings; give the atmosphere of the room some dynamism; highlight and highlight details and accessories in the interior of the room.

Sometimes alternating horizontal wallpapers of different colors may require gluing a border. Therefore, let’s take a closer look at how to stick a border correctly.

The main purpose of alternation is to mask imperfections in the surfaces of a living space.

Alternating wallpaper stripes vertically

The combination of 2 paired wallpaper colors can be expressed in the alternating vertical alternation of different strips of wallpaper at equal intervals. To glue wallpaper using this option, you need to be very careful when choosing paired shades for the wallpaper. The principles for selecting paired colors for wallpaper can be as follows:

Using shades within 1 color (for example, green in a lighter and darker shade).
Harmonizing colors. For yellow, for example, it will be orange, egg, light green, cream, etc.
Contrasting colors (green - red, lilac - yellow, orange - sea green).

You can start alternating using a smooth transition on one of the walls. This will eliminate sharp changes colors, but get a very original effect.

For an oblong room, you can use the “Symmetry” technique. Background wallpaper should be lighter in color, and almost the entire room is covered with it, with the exception of the center of 2 opposite walls. In the central part of the walls there will be a wide panel of wallpaper with additional bright shade and other textures. It is up to the size of the panel that the room will be perceived visually much smaller.

Somewhat reminiscent of the previous technique “Asymmetry”. In this case, wallpaper on the first wall should be glued in the same way as described above. Here it is important to know how to glue wallpaper on the opposite side. Bright strips of wallpaper are glued onto it, starting from the corner location. This approach to wallpapering will allow you to visually increase the width of the room, while slightly reducing its length.

Horizontal combination of wallpaper with different patterns

When alternating wallpaper horizontally, it is not necessary to adhere to the standard 1/3 ratio, pasting a meter-long piece over the lower part of the wall surface.

Use your imagination and experiment with the choice of colors and textures of materials. Combination is welcome in the kitchen different finishes for walls (paint, tiles, wallpaper). In the bathroom, for obvious reasons, the choice is not so wide (panels, tiles, paint). IN living rooms the choice will have to be limited to different types of wallpaper.

Today, a very popular technique is to focus on one zone. It is used to give individual element Interior increased attention in the overall composition of the entire design. For example, highlighting the area of the wall behind the TV. The main background in the room can be wallpaper with a pattern, then the allocated area is decorated with wallpaper without a pattern.
In the bedroom it is also permissible to highlight accent wall: often more bright wallpaper with ornaments they paste over the wall located behind the bed.
Horizontal separation is a good alternative to vertical striping. The lower part is pasted over textured wallpaper, and the top – textile. The seam is masked behind a strip, molding or border. When you have no idea how to properly hang wallpaper with a border, it makes sense to use the previous methods of gluing paired wallpaper.
The patchwork technique looks original in any interior style. To implement it you will need different rolls of wallpaper. Identical pieces are cut out of them, which are then glued to the wall in a chaotic manner.
Protrusions and niches can be highlighted with material in contrasting shades. A special effect will be achieved against a colorful background.

Examples of decorating a children's room with different wallpapers

How to wallpaper a baby's room using a combination of wallpapers?

You can use the technique wallpaper inserts: all surfaces of the walls are covered with the same wallpaper, and bright characters from animated films are pasted on top of the background, forming entire plots.
If you are gluing wallpaper with a border in a child’s room, it is best to glue the border with drawings at the baby’s eye level, then he will be able to look at the funny pictures with pleasure.
More interesting option to the child’s room: the upper part is made plain (painted or pasted over), and strips of special strips are glued to the bottom at a distance of 45 cm from the floor washable wallpaper with carved edges. Such decorative wide rolls of wallpaper are expensive. But you can find a way out of the situation - just glue them visible to the eye parts of the walls where there is no furniture.

Today you can find a suitable border for almost all wallpapers.

What is important to consider when buying a wallpaper border, and how to glue the border according to all the rules?

Wallpaper borders are narrow strips of wallpaper used for decorative edging of a covered area. The border serves as a horizontal embossing of the surface and the visual perception of the height of the room will depend on its size (the wider the strip, the lower the ceiling height will look). The border dimensions are 10-20 cm wide.

The difference between a border and a frieze is that the stripe of the latter is more than 20 cm wide.

What types of wallpaper are there borders for?

For paper ones. They are easy to glue and easy to remove. Such wallpaper will be an excellent option for those who often make repairs. This is due to the fact that such strips are not very durable, instantly lose their brightness, and cannot be washed (especially with detergents).
For vinyl. It is impossible not to note their practicality: they are easy to wash and clean; they retain their original color for a long time. Therefore, they can easily be used in the design of a bathroom, toilet, kitchen, or hallway.
For textiles. They consist of 2 layers: a paper bottom and a woven top.
For acrylics. These are analogues of vinyl. The main difference is that an acrylic emulsion is applied to the base. Cheaper than vinyl.

An unusual effect is created by colorless borders made of artificial materials. They are used in conjunction with wallpaper for painting or glued to plain painted walls, after which they are rolled up simultaneously with the wallpaper with water-based paint.

A glued border on the wallpaper creates a cozy and warm atmosphere in the room.

Finding a curb is a responsible matter. It’s easy to find suitable borders to match the wallpaper. Surely the wallpaper store will offer several to choose from alternative options. This can be done from a beautiful catalog, the pages of which present samples of wallpaper and stripes that harmonize with them.

Matching the border to the wallpaper. Manufacturers limit the choice to 2 types of combinations of borders and wallpaper - by shade and presence of pattern. For example, a dark green background with a floral pattern can be complemented with a white or light green stripe with or without a similar pattern of twigs and flowers.

It will not be difficult to choose a border of any color and with a different pattern for plain wallpaper.

Sometimes factories provide a combination of different patterns on borders and wallpaper. But this should be done with great caution if you have artistic taste. Otherwise, the wall may turn out to be too colorful.

Sometimes there are proposals from manufacturers when wallpaper with borders is made with the same pattern, but of different scales. For example, leaves can look large on wallpaper, but miniature on stripes. It is important that the wall covering has a color consonance with other elements of the decor. Therefore, it is so important to accurately select the shade of the edging or the wallpaper itself.

Locations on the wall surface

Wallpaper borders can be located at the top and bottom of the wall. The first arrangement option results in a decorative border that gives the room more coziness. In the second position, the border strip acts as a delimiter between different types of wallpaper. The border is not glued in the center, because in this case the room begins to seem much lower. The optimal location is considered to be at a distance of 1/3 from the floor surface.

Less often they make an edging at the very bottom near the floor. This technique is applicable in a situation where too short strips of wallpaper are cut off and the gap needs to be filled with something.

Wallpaper borders can be pasted both horizontally and vertically (to visually highlight a certain part or section of the wall). They are used to frame wall panels, photo wallpaper, interior doors, furniture and other accessories.

Gluing borders to the wall

There are several ways to paste a border onto wallpaper:

Often the border is glued directly onto the wallpaper. But in this case, you will have to wait for the latter to dry completely in order to get the best result. It is preferable to use special border adhesive on acrylic base. There is no need to dilute it with water, as it is released ready for use. The tube of glue has an applicator with a brush or brush. The glue is applied to pre-cut border strips, after which the base is moistened with water. The glue should be absorbed within 4-5 minutes.
It happens that the border is glued end-to-end with the wallpaper. This gluing method is recommended for wallpaper with high relief (embossed wallpaper, double-layer paper or covered with foam vinyl). In this case, you can glue the border with regular glue for the type of wallpaper used.
Another way to glue a border. A horizontal line is marked along the entire perimeter of the room at the designated height. with a simple pencil. After this, the upper component (above the curb) of the trim is glued. The bottom edge is cut along the marked line using a metal ruler and a sharp knife. The border, pre-impregnated with glue, is glued end-to-end to the edge of the wallpaper, while its lower edge of 1.5-2 cm is left not pressed against the wall. The wallpaper sheets of the lower panel are placed under the border and cut along the lower edge. The section is removed, and the border is finally glued to the wall.

First, decide where exactly to glue the border: at the baseboard or under the ceiling, at a distance of 1/3 of the wall or around the door and window.

It will not be superfluous to make sure that the place of the future sticker is not dirty. You can use a soap solution to wash the surface. A clean wall is the key to successful and high-quality work done.

There should be no voids, holes, cracks or other defects at the place where the future border will be glued. Because most of borders are made of loose paper, then sooner or later all the irregularities will become noticeable. Holes should be filled with putty, traces of paint, glue and other stains should be erased. The glue is applied to the already prepared surface.

You can purchase a self-adhesive border, but you shouldn’t expect it to stick perfectly. It won't hurt to lubricate it with glue for greater reliability. When applying the border to the wall surface, you need to carefully smooth it out and remove excess glue.

When gluing a border in a corner, try to overlap the end of the border onto the adjacent wall. Glue another strip overlapping the previous one. This does not create a gap in the corner.

Pasting interior doors or windows

Pasting windows or doors with stripes will add more decorativeness to the overall appearance of the room. There is one difficulty here when connecting the strips: they need to be cut very precisely and connected in a miter (maintain an angle of 45°).

Try to choose stripes so that there are no patterns, large designs or colors at the joints. Overlap the strips at the junction and use a diagonal ruler and a sharp knife to cut through both strips. Remove the section from the horizontal border. Fold the edge of the same border and remove the section of vertical border. Place the horizontal edge back, press and press the seam.

The use of borders is optional, but recommended. Especially in the case when there are 2 border zones in the finishing of the wall surface. The selection and use of borders must be approached wisely and carefully, since decorative frame can both narrow and expand the room visually.

Many now believe that borders and friezes have outlived their usefulness. But, as you know, everything new is thoroughly forgotten old and young designers are increasingly using this finishing detail. The question of how to glue wallpaper with a border in the middle, top or bottom worries many of our compatriots, and we decided to give some advice from our experts.

There is an expression border wallpaper, but it is not entirely true, because any wallpaper that is edged with a border tape can be considered this species. It would be more correct to consider the tape itself, its types, purpose and installation methods. It is classically believed that this ribbon should be no more than 20 cm wide. Anything wider is already called a frieze.

Important: according to the laws of psychological perception, it is believed that the wider the tape edging the room, the visually lower the ceilings will appear.

General points related to the border

There are currently enough products on the market wide choose of this material. A smart decision would be to choose the edging directly when purchasing wallpaper. As a rule, a competent seller will be able to offer you several options for decorating your canvas. Here it is important to decide in what style you want to decorate your home.
You can select in different ways, in the first case you should focus on the color shade. For a calming atmosphere, use a tape of the same color as the wallpaper, but with a different shade. To add brightness and dynamism, you need to use opposite colors of the spectrum.
The second method involves relying on a drawing. The design should be consistent with the ornament on the walls. It may differ in scale or color scheme, but it should still be similar.

Advice: do not make an overly bright edging, it will be very noticeable, and sometimes it can even irritate.
This interior detail should emphasize beauty, but in no case be intrusive.

For what coatings is it used?

If speak about paper wallpaper, then this is for the most part an economical option, they are glued quickly and easily, but they do not last so long, they often lose their shine and fade. The most you can do is wipe off the dust with a dry cloth.
Vinyl sheets are considered the most resistant; they are not afraid of almost anything. They can be wiped with a damp sponge and even washed gently with gentle detergents. Vinyl is UV resistant and quite durable. You will get tired of them before they become unusable.
Textile tapes are a specific product, their price is quite high and such finishing is suitable only for an interior made in a certain style. Here you can often find two-level wallpaper, to separate which a special border or frieze is used.
There are also tapes with acrylic coating, they are quite durable and beautiful, but their price is lower than that of vinyl. Another advantage is that acrylic is a breathable coating.
An interesting effect can be obtained by using synthetic colorless borders. They have a certain texture and are used in tandem with plain coatings for painting.

Where can I glue the tape?

Wallpaper border tape can shade or separate. At low ceilings, it’s better to put a narrow edging along the top and leave it at that. If you want to add some zest to the interior, then you should try combining wallpaper different colors, dividing them with a border, but do not forget, the wider the tape, the lower the ceilings will appear, plus the tape is started either at the height of the window sill, or at 1/3 of the height of the wall. Otherwise, the ceiling will also drop significantly.

Important: when planning to assemble multi-colored or multi-textured canvases, you should take into account that there must be one material. If you use vinyl, then everything should be vinyl.

As for the bottom edging, it is used extremely rarely and mostly to hide unevenly glued canvases.

The video in this article shows the general technique for working with wallpaper.

General gluing technique

As for purchasing tape, the instructions are simple. We measured the perimeter of the room and got the quantity. If the border has an ornament, or the application path is too complex, add 15 - 20% to the resulting value for trimmings.
Gluing wallpaper with a border with your own hands begins, naturally, with gluing the wallpaper itself. Then, using a ruler level and a pencil, mark the route along which the tape will be mounted. Moreover, it is better to navigate not by the ceiling, but by the floor. So in case of unevenness on the ceiling or deviation from the level, the defect will not be noticeable.

Important: in standard Khrushchev buildings the curb should meet the ceiling and not be too wide.
High ceilings can be shaded by placing a tape between the top edge of the window and the ceiling.
A mid-section at 1/3 of the wall can also visually lower ceilings.

They begin to glue the edging after the wallpaper has completely dried, this is about 48 hours. You can use the same glue as for this one or purchase a special acrylic composition intended directly for installing friezes. After application, the cut strips can be folded with the smeared side inward and left for 5 - 10 minutes so that the base is well saturated. You can apply several strips at once and work calmly.
It happens that heavy wallpaper those with a thick textured pattern are mounted end-to-end with the curb. In this case, when wallpapering, an empty space is left for the border, but it should be somewhat narrower than the width of the tape. Next, the tape overlaps the wallpaper. After that, a metal ruler is applied to the edge of the tape and the excess wallpaper is cut off with a knife. If necessary, the tape is coated with glue and finally installed.
When gluing doors or various types of niches, the need arises for correct joining in the corners. The instructions here are also not very complicated. The borders are overlapped, after which both strips are cut at an angle of 45º with a sharp knife. Next, you just need to remove the excess, coat it with glue and glue it.

Conclusion

The use of edging is not mandatory requirement when decorating the interior. But it can significantly revive general form rooms, add your own special charm.

A wallpaper border (or frieze, edging, edging, border tape) is a strip of small width made from various materials, which is glued on top of the wallpaper or in places where it meets other materials. Choosing the right edging is not that difficult. This article describes in detail what you need to consider and what nuances you should pay attention to before buying a wallpaper border.

Often when purchasing wallpaper in addition to the main one finishing material It is proposed to purchase such a decorative element as borders. This product allows you to complement the appearance of the room, highlight significant design details, adjust the visual size of the internal space, hide finishing errors, and set boundaries at junctions with other materials.

Almost any specialized wallpaper store has catalogs of border tape. The buyer can choose it independently from the offered assortment. However, many manufacturers greatly simplify the task of choosing by providing one or more border options complete with the wallpaper model.

As a rule, the manufacturer offers two combination options: by color or by pattern. For example, light green wallpaper with floral patterns goes well with a white or dark green border with or without the same pattern. In case of plain coating you should opt for a frieze of a similar shade with some kind of print. This addition will enrich the design of the room and make it more sophisticated and attractive.

It is important to choose a border that will blend harmoniously with

Helpful advice! In one collection you can find wallpaper and border tape with different patterns. This combination may not look very good in small room, too oversaturating the appearance of the walls and drawing unnecessary attention to them.

Another option from manufacturers is wallpaper and borders with the same image. For example, the first ones are decorated with large geometric shapes, and the edging is identical in color and shape, but smaller in size. It should also be taken into account that the wall covering should be combined not only with the frieze, but also with other design elements.

Regarding choice color range It must be said separately that a very variegated tape is appropriate only in rooms where the focus is on the walls. At the same time, there are no plans to even hang cabinets and other furniture elements. However, there is one type of room where the use bright colors justified - children's.

When a child reaches adulthood, caring parents They often want to cover his room with wallpaper on a theme that interests him at the moment. This is main mistake, since a young child’s hobbies usually change very quickly. It is much more advisable to choose a border tape “according to your interests.” Replacing it will be much easier, cheaper and faster than completely re-sticking the entire covering in the nursery.

The walls themselves are painted in a neutral, positive color. It is worth remembering that a room that is too bright and provocative can cause anxiety in children.

Choosing a border material for wallpaper

There are several options for making a decorative frieze.

Paper border for wallpaper. This option is affected ultraviolet rays, pigment fading, as well as mechanical damage when cleaning. Such a frame can be used in renovation if relatively frequent changes in the interior of the room are expected. The main advantage is the ease of pasting and removal. All this is worth taking into account before buying a paper border for wallpaper.

Vinyl framing. It is more practical, durable, durable, less susceptible to fading, easy to clean with wet cleaning. Vinyl tape is well suited for the hallway, kitchen, bathroom and other places with increased pollution.

Acrylic edging. Includes all the benefits of vinyl, but has more low cost due to the use of acrylic emulsion in it.

Textile edging. It has a two-layer structure of paper and fabric, resulting in greater density and durability of the coating.

How to properly place a wallpaper border on the wall

It should immediately be noted that the edging is never glued to the center of the wall. Otherwise, the room visually becomes lower. The ideal location is 1/3 of the height from the floor. In this case, the strip becomes the interface between different types of wallpaper. One of classic examples The combination is “striped wallpaper – edging – patterned wallpaper.” The choice can also be made in favor plain wallpaper, while the lighter ones are glued at the top, and the darker ones at the bottom.

The option for placing the frame described above is especially relevant when covering a kitchen. The main factor here is practicality. Often more expensive coverage is glued to the top of the wall, and special washable wallpaper and vinyl or acrylic edging cover the work area.

The most common placement of a decorative border for wallpaper is under the ceiling. At the same time, it partially replaces ceiling plinth. It is necessary to take into account that it is recommended to choose the frieze at the very top of the wall only for large spacious rooms. This emphasizes the beauty of the ceiling, makes the room more comfortable and cozy, and adjusts its visual dimensions.

Helpful advice! ABOUT The wallpaper border can be glued vertically. This allows you to visually highlight a certain section of the wall or functional area. You can edge doorways, mirrors, furniture, etc.

Very rarely the border strip for wallpaper is located at the bottom near the floor. This technique can be used if an error was made when measuring the height of the wall and the wallpaper turned out to be short after cutting. There are also cases when low-quality material shrinks when dried.

Related article:

Types of wallpaper. How to choose wallpaper for apartment rooms: living room, bedroom, children's room. Wallpaper for walls: catalog of photos and prices different kinds wallpaper

Also, the tape is glued to the ceiling and, like a mirror image, immediately below it on the walls. This arrangement visually adjusts the size of the room and its appearance.

Tips for preparing and applying wallpaper borders

When pasting wallpaper, it absorbs moisture and becomes more susceptible to mechanical stress and contamination. Therefore, you should let them dry thoroughly and only then proceed with application. borders for wallpaper. The drier the surface, the better the adhesion of the two materials after application.

Border glue polymerizes (dries) fairly quickly. Therefore, in the absence of much experience, the pasting process should be divided into stages. This allows you to avoid situations where the smeared edge has dried out and become unusable. It is also worth making sure in advance that all necessary tools.

Some wallpaper has a pattern with horizontal guides that you need to follow. The lack of parallel between the frame and the main wall pattern can be very noticeable and negatively affect the visual perception of the design.

When cutting, the pieces need to be made a little longer, which will allow you to compare the images. This is true for borders with a pattern.

It is necessary to carefully check the surface of the walls on which you plan to place the tape. Any irregularities will sooner or later appear due to thin material execution. It is necessary to cover up all irregularities, cracks, and remove any remaining paint or glue.

When using self-adhesive wallpaper edging, you should not rely entirely on its quality. Over time, it may begin to fall off. Therefore, it is much more advisable to additionally lubricate the surface with glue when placing it than to solve problems that arise in the future.

Sometimes the wallpaper border is glued end-to-end with the main covering. This is true for varieties with developed or high relief (two-layer wallpaper with embossing or with an additional layer of foamed vinyl). In this case, regular wallpaper glue is used.

Necessary tools for applying a border to a wall

To glue the frieze you will need the following tools.

Level. It is very important to maintain a strictly horizontal position of the edge, which allows you to perfectly align the border around the entire perimeter of the room and not spoil the appearance of the interior.

Smoothing roller. Serves to expel bubbles and excess glue. This tool can be replaced with a plastic spatula or soft sponge. However, the roller has an advantage: the likelihood of displacement when smoothing the border wallpaper tape is minimal.

Brush. The surface on which the frieze is glued must be as clean as possible. A soft brush will help remove dust immediately before pasting.

Sponge or absorbent cloth. It is needed to remove excess glue from the wall. The fabric should not be fleecy. It is best to use natural white linen or cotton fabric so that the cloth dye does not smear the coating when wet.

Glue roller. Can be replaced with a regular paint brush. However, it should be taken into account that when pasting, the pile can cause a lot of inconvenience and slow down the work. If one person is engaged in pasting, it will be quite difficult for him to simultaneously hold the smeared frieze and at the same time get rid of the stuck debris.

Wallpaper glue. When choosing an adhesive, it makes sense to additionally consult with the seller at the time of purchase, indicating the material of the frieze and what surface it should be applied to.

Stepladder or table. If you plan to place the border on the walls at the top, then for work you will need a stepladder or a strong table that can support the weight of a person. It is necessary to remove in advance all objects that interfere with movement along the perimeter of the room. This will also reduce the likelihood of further injury from falling from height.

Desktop. Necessary for placing the tape when spreading. Working surface must be thoroughly cleaned of dirt and can be covered plastic film to avoid any contamination during operation.

The process of gluing a decorative border for wallpaper

Before you begin basic operations, make sure you have all the necessary tools and materials. Remove all unnecessary items from the room or protect them from accidental contamination, and arrange the work surface conveniently.

Glue preparation. It is strongly recommended that you carefully study the manufacturer's instructions, as some adhesive mixtures divorced unconventionally. According to general rules, the dry mixture is placed in a container with water and mixed slowly. The subsequent infusion process takes approximately 20 minutes. After this time, the glue is mixed again until a homogeneous mass without lumps is obtained.

When using glue mixed with acrylic mass, mixing with water is not required. This material can be used immediately. It should be noted that thanks to the acrylic base, ideal adhesion to the surface is ensured.

Note! Improper preparation of the adhesive will subsequently affect decorative features borders for wallpaper. Therefore, it is worth treating this stage responsibly. Otherwise, the tape will have to be re-glued.

Marking. In order for the edging to be glued evenly, you need to mark its location in advance with a simple pencil. This will greatly speed up and simplify subsequent work and make the result ideal. For marking, use a level and a long ruler (or other smooth drawing guide). The greater the distance between two points when drawing lines, the less likely there are deviations.

An interesting approach that significantly speeds up the process of drawing lines is the use of a guide line. In this case, you can mark an arbitrarily long wall in one step. However, such work requires at least three people: two to maintain the guide and one to draw.

Tape cutting. This stage is very simple, but requires special care. After the surface is marked, measurements are taken and pieces of border tape for wallpaper are cut. If the length is chosen with a small margin, the process of combining joints can be significantly simplified. Excess can be carefully trimmed off immediately after placement on the wall.

Applying glue. The adhesive is applied to the border tape with a brush or roller. The greased edge is left for 5-10 minutes. This time can be used to once again go over the surface of the wall with a brush and remove any settled dust.

Applying edging. The wallpaper border is carefully placed on the wall according to pre-made markings. When gluing in corners, the end of the tape should touch the adjacent wall. The next strip is glued overlapping, the allowance is 5-10 mm. This avoids gaps. You should not make sudden movements or strong bends. Otherwise, the border may tear.

After application, using a special roller (or clean cloth), air bubbles and excess glue are expelled from under the material. Next, excess glue is carefully removed with a cloth or sponge. After the entire perimeter of the room has been processed, the border glued to the wall should dry well. Drying time depends on the adhesive chosen, but often takes up to 24 hours.

Border for wallpaper around the perimeter of the openings

Selecting door or window openings decorative ribbon will be a spectacular decoration and addition to overall design premises. The main difficulty here is that the pieces of tape need to be connected at an angle of 45 degrees.

To get a perfect joint, you need to place the vertical and horizontal strips overlapping, one on top of the other. Immediately after this, place a ruler along the line of the future joint (diagonally) and draw it with a sharp knife, cutting both layers. Next, bend the edges and remove the trimmings. After this, return the parts of the joint to their original position and carefully smooth them out, removing excess glue.

Selecting and applying a border to a wall is a simple task that even someone who is doing it for the first time can do. However, it is worth remembering: what seems new in theory is original idea– in practice it can give results that are far from expected. Therefore, it makes sense, if not to be guided, then at least to take into account the generally known rules and recommendations of experts.

Decorative borders give the interior a special charm, a modern, finished look. An experienced designer cannot do without such a decorative element when creating a project. Various ways applications allow you to fully use the purchased material.

Decorative borders for walls: application and relevance

A decorative border for a wall is a strip of wallpaper, a textile strip, wood or polystyrene, a design drawing or decorated parts glued (drawn) in places intended for decoration.

Use:

for a certain wall delimiter;
for interior decoration;
to cover defects in wall gluing

The border as a decorative element is used for visual expansion space. This is the height or length of the walls. At misuse the effect will be exactly the opposite.

A typical application is the use of edging at the top of the wall, at the intersection with the ceiling. This method of arranging the element will help hide the imperfections of the lining and uneven walls.

A border glued along the perimeter at the bottom of the wall will help to hide such imperfections as pasting, such as improper wallpaper height. It is important to choose here strong material, otherwise it will quickly wear out at the bottom of the floor.

It is also useful to use a border to separate two different wallpapers (textures), the decorated element merges them into a single whole. This method is used in practice among designers.

Make a choice of border when purchasing wallpaper, this will help you avoid mistakes when choosing a shade (pattern).

The edge of an arch or mirror can be covered with a bright strip; this will help separate the decorated element from the rest of the background in the room. Use bright material, so it will look more advantageous.

A new border will help refresh the atmosphere in the house, prepare for a holiday or the birth of a child.

The relevance of decorated elements has not changed, just like a hundred years ago people need beautiful interior. In stores they open entire departments with a wide variety of its types. The imagination of designers helps to realize the ideas of customers, and the available assortment of the store helps specialists. Paints, boards and stencils great way diversify ideas for creating borders.

Varieties

There are several types of borders, which we will look at below.

By shape

Types by shape:

narrow strip of paper - a frame used for vertical or horizontal applications;
wide paper strip - framing used for vertical or horizontal application;
decorated elements (flowers, tiles and others), most often this type is used in the kitchen or bathroom;
a drawing obtained using a stencil;
convex 3D plastic strips

By material

Types by material:

Paper (easy to glue and remove, cannot be washed);
Acrylic (paper with acrylic coating);
Plastic (washable, difficult to paste);
Ceramic (used for bathrooms and kitchens);
Wooden (suitable for cottages and country houses);
Obtained using paint (can be washed, done on painted walls);
Self-adhesive (sticks and peels off);
Textile (thick paper with a layer of textile);
Vinyl (vinyl coated paper).

By color

A wide variety of colors:

Bright shades;
Warm shades;
Multicolored;
Patterned;
Wood colors, etc.

By purpose

It is always better to combine the type of border with the wallpaper or material on which it will be glued. For example, if the wallpaper is vinyl, then the edging is also vinyl.

There are decorated elements intended for pasting in the bathroom; they are characterized by moisture resistance. This is a tile type that is suitable for kitchen and bathroom.

Wooden borders are intended for kitchens or rooms in country house. In a city apartment, this type of decor is unlikely to fit into the interior, although designers can do anything.

What should be the border on the kitchen or bathroom wall?

The border for the kitchen is bright color scheme. Designers do not miss the chance to use the element in the interior of the kitchen. More often they use a ceramic border with a convex pattern or a smooth one. The length of the strip should correspond to the length of one tile.

A ceramic border in the kitchen is a sign of wealth for the owners, attractive and possessive in its own way. The properties of ceramics are durable. It can be easily washed and pleases the owner's eye.

In every bathroom there is a gap between the bathtub and the tiles that needs to be sealed. To do this, use a plastic border. This economical option, used in inexpensive repairs.

Adhesive border tape will be the most budget option. The service life does not reach one year, it gets dirty quickly, but is considered quite moisture resistant.

How to glue

When pasting the edging, the main thing is that the walls are smooth. Then it will be much easier to fix the decor.

When choosing an adhesive, you should give preference to acrylic, an ideal adhesive at an economical price.

The second option would be the same glue that was used to glue the wallpaper. This is convenient if there is a lot of glue left. The quality of fastening will not be much worse.

If you treat the wall with a primer before gluing, this will reduce glue consumption. The primer will improve the necessary adhesion.

When preparing for gluing, make sure that the pattern is even and matches the subsequent strip.

If we are talking about the bathroom and kitchen, the border is glued here polyurethane foam sealant or cement mixture.

To do this, do the following:

Fill the gaps with sealant (spray foam);
Prepare glue for ceramics strictly following the instructions;
Start gluing from the corner, press firmly and hold for 30 seconds;
We leave small gaps between the parts (tiles), and fill the gaps with grout every other day.

The remaining cracks should be filled with grout only after complete drying.

There are many things to consider when choosing a border. Every little detail in a renovation is very important. The technology for gluing borders is simple, you just have to dive into it head first and then everything will work out!