DIY chandelier decor: new ideas and materials (53 photos). How to make a paper lamp with your own hands Paper ball lamps in the interior

Materials

The most suitable and available materials- this is paper and textile. They are easy to transform, each of us is familiar with them and can be found in everyone. home. Wonderful lamps are also obtained from threads or yarn. Naturally, glass can also be used for lampshades. At home, these are ordinary or unusual, with an interesting shape, jars or bottles. In particularly daring projects we have noticed plastic containers, and coffee packaging, and plastic children's toys.

In addition, do not discard options such as rattan, bamboo and rubber. Both raw materials and a finished product can serve as the basis for a future product. For example, designers have become adept at creating delightful lampshades from beads, globes, parts of sets, mirror shards and even crumpled sheets of music! You just have to take a closer look at the objects around you...

Understanding how difficult it is to move from thought to action, especially to see an exquisite accessory in an ordinary jar, we have prepared several master classes for you. Following step by step instructions, you can easily make hand-made new things dear to your heart for any room in the house.

Ideas and their implementation

Since we have already mentioned the materials suitable for making lampshades and lampshades, let’s start with paper.

Lamp with butterflies

For work we will need:

white thin cardboard
thin twine or fishing line
glue gun
wire for frame
utility knife or scissors
round pliers

Advice! Before you start work, decide on the dimensions of the lampshade in finished form. In our example, the diameter is 30 cm, which means we need a piece of cardboard 90 cm long.

We make a frame. Cut a piece of wire 96-98 cm long. Roll the wire into a circle with a diameter of 30 cm and secure the ends with pliers.
We cut 3 hanging elements from twine or fishing line. We measure the length of the pieces based on the height at which you plan to hang the lamp. We tie them to the wire in three places, evenly distributing the load.
Draw butterflies on cardboard different sizes and cut them out.
We fold the cardboard and glue the joint with a strip. thick paper or stitch it with a stapler.
We fix the upper part on the wire. For this you can use both glue and thin wire.
The places of joints and cuts can be decorated with butterflies remaining after cutting.
Look what an elegant lamp we have created. It will fit perfectly into both a children's room and a bedroom. You will see a special chic when you turn on the lamp and butterflies flutter along the walls.

Advice! Instead of butterflies, you can cut out snowflakes, stars or flowers. Decide for yourself what you like best.

60s style

If you ask our grandmothers, they will certainly remember floor lamps with lampshades in the form of an inverted bucket, tied with colored threads. We can do exactly the same thing with our own hands.

We will need:

frame for lampshade – 2 pcs.
decorative braid (3 colors, choose a combination to your liking)
scissors
crochet hook

Let's start manufacturing.

We tie the first braid to the lower ring of the lampshade, leaving a tail of at least 5 cm.

Pull it onto the top ring with outside, throw it over it and pull it through the inside of the lower ring. We alternate actions until the next sector of the frame begins.

We fasten the first braid and take a braid of a different color to work. We knit it to the next sector, not forgetting to leave a tail on the first knot.

We do the same with the third sector, filling it with the remaining braid.

We stretch the tails along the bottom of the lampshade using a crochet hook.

Now our lampshade from the distant 60s is ready, all that remains is to insert the socket and assemble the chandelier in any order.

Fringed braid

Another one original idea for a lampshade with your own hands, it is also connected with braid, but not single-layer, but with fringe. What do we need for this?

Prepare:

two metal hoops or an embroidery hoop
fringed braid
fishing line
acrylic paint, the same color as the braid
glue gun
scissors

Advice! Fringed braid can be purchased in stores that sell decor for curtains and furniture.

We paint hoops or hoops acrylic paint. If they are already covered with varnish or other paint, it is better to sand and clean them.
We wait until the paint is completely dry and make three marks on each ring of the lampshade, placing them at an equal distance from each other.
I cut three identical pieces of fishing line.
We tie them to the smaller ring of the lampshade, leaving the upper ends with a margin so that we can then tie them to the lamp cord.
We measure the length of the fringe, subtract 2 cm from it, and tie the fishing line to the second ring using the resulting length. This way we can get a cascade.
Heat the glue gun and carefully glue the braid along the bottom ring.
We do the same with the upper ring, pulling it out from the lower one.

Advice! Please note that the hot glue may melt the line, so be careful not to apply it directly to the line. Drop glue onto the paper, let it cool a little, and then apply it to the fishing line.

People who have developed creative abilities very often create interior elements with their own hands, and making a master class chandelier is not difficult. Only it is better to buy factory-made lamps for the bathroom, because they must be small and reliable.

Dwellings containing objects self made, acquire a refined and original look.

We make a chandelier with our own hands from plastic bottles

To make a chandelier from plastic bottles we take:

If there old chandelier, you can take her island
Many colorful bottles
No more than ten steel rods

From plastic bottles we use scissors to cut out any figures that you want to see on your chandelier (animals, flowers, etc.)
We attach several twigs to the chandelier island. From the rest we make something similar to a hedgehog, connecting the rods in the middle. We remove one rod where the light bulb will be
Next, we supplement the resulting frame with previously cut plastic figures.
We connect the island and the hedgehog together.

Now you know how to make a plastic chandelier with your own hands. To consolidate the material, we recommend that you watch a video that contains examples of chandeliers made from plastic bottles:

Making a chandelier with your own hands from wood

To make a wooden chandelier we will need:

Twelve strips for door trim, 30-45 cm each.
Liter jars from which we will make lampshades (6 pieces).
White and wood-colored paint.
Self-tapping screws for wood.
Sandpaper.
Seaming machine.

Description of the manufacturing principle.

Making the planks smooth using sandpaper
We need a place for the electrical wire, so we make a recess with back side each plank.
We drill three strips to which we will attach the shades.
We paint the planks a wood color.
We make a regular hexagon from the plans.
We attach the cartridge to the hole in the lid.
We roll up the jars with light bulbs inside.
We paint the lampshade in any light color.

DIY chandelier made of wood, photo below:

Making a chandelier with your own hands from threads

To make a chandelier from nylon threads we take:

Let's make a lampshade from a plastic bowl
Multi-colored threads
Fastening paste

Description of the manufacturing principle.

First of all, let's make the paste. Mix half a glass of flour and two glasses of water, two glasses of water with a temperature above 60 degrees, boil and throw in about three tablespoons of sugar. Stir and wait until it cools down. Next, we’ll look at how to make a lampshade with your own hands for a chandelier.
Throw the yarn into the paste.
We wind the resulting yarn around a bowl.
After 24 hours, separate the resulting thread lampshade from the bowl.
We attach the lampshade to the bottom and that’s it, the chandelier can be hung on the ceiling

Attention! A DIY lampshade for a chandelier requires the use of a light bulb of no more than 60W, as it is made of flammable materials.

Have you decided to change your interior and want something unusual? The store offers a huge selection of different things, but why not make something yourself? The designer lives in each of us, you just need to wake him up, change the world that surrounds you, make it the way you see it!

Why not start with a chandelier? She might become business card your home, which no one else has. This will not only save your money but also give you a sea of unforgettable emotions.

Make a chandelier shade with your own hands. You will be surprised that things that you were ready to throw away can be useful to you and reborn in your new invention.

First you need to decide on the style of what kind of chandelier you want.

If you are young - chandelier in romantic style for you, need to decorate country house– country style will be just right.

DIY chandelier (photo based on lampshade decorations)

To make a chandelier with our own hands, we take:

Light bulb socket.
Power cord.
Frame for a chandelier.
Decor for jewelry.
Multi-colored threads.
Hot glue.
60 Watt light bulb.

For the frame, what's left of your old, long-forgotten chandelier is suitable. Many famous designers began their illustrious careers by giving old items a shine, bringing them back to life and putting them up for sale.

Take measurements and decide on the fabric you will use. Sewing the cover the right size put on the frame. You can decorate the lampshade however you like. These can be cut out flowers, animals, figures, beads and much more that your imagination can reproduce. We attach a socket equipped with a low-power light bulb to the lampshade and everything is ready. A lampshade made by yourself will lift your spirits every time you look at it.

Making a New Year's chandelier with your own hands

How to make a New Year's chandelier with your own hands to surprise your friends with your suddenly discovered talent?

To make a chandelier we take:

Organic glass or thin wooden sheet.
Linen rope.
Multi-colored balls.
Small stapler.
We use glass parts left over from an old chandelier.

Description of the manufacturing principle.

We start by cutting a square from plexiglass, the dimensions of which are 50:50 cm. We make holes every 5 centimeters throughout the entire area, as chaotically as possible. We take a linen thread and thread it through the water hole and out into another, adjacent one. The length of the extended ends should be two meters. Let's do it this procedure until we fill all the holes in the square.

We hang this composition instead of a chandelier on the ceiling and continue to decorate the chandelier as christmas tree. We take the balls and tie nylon threads to them, different lengths, and tie them to the structure, concentrating them in the central part. Next we perform the same operation with glass products, but we hang them already at the edges, the length of the thread should be less than on the balls. If you look at the structure as a whole, it will look like an inverted pyramid.

Now you know how to make a New Year's chandelier with your own hands. Start your crafts right now and you won't stop with the chandelier.

IN Lately Decorations for chandeliers such as thread wrapping have become very fashionable.

Description of the manufacturing principle.

We will need a lot of thread and PVA glue, as well as an inflatable ball. Cotton threads are perfect for our project, since the glue applies evenly to them and behaves obediently.

We wrap the inflated ball with threads, apply glue and wait until it dries. Then we simply pop the ball with a needle. Cut a hole on top for the light bulb and you're done. Your result can be compared with the DIY chandelier in the photo.

IN in this example The thread can be completely replaced with lace and you will get a good kitchen lamp.

Instead of a ball, you can use other shapes, such as a juice bag. Choose a sconce online that you like and use the appropriate mold.

Another way in which you can make a wonderful chandelier with your own hands from improvised materials.

If you happen to have embroidery hoops lying around at home, don’t miss out on the opportunity to make a great lamp out of them. The basis here will be the hoop and wire, they will give your lamp the shape you want. You can stretch fabric over the frame or use a hanger. An unobtrusive New Year's garland can serve as an excellent decoration if it is attached to the inside of the lamp. If you make not one such lamp, but several, then in combination they can give your bedroom a completely new and fresh look.

Recently it has become very popular to decorate the interior of the house with various fakes made with my own hands. Funny little things made with your own hands add originality and sophistication to the interior of your home. To create an interesting fake, you can use absolutely any material - paper, plastic, wood.

But the most popular are paper chandeliers made with your own hands. Such chandeliers can decorate and enliven any interior. Many people use paper chandeliers to decorate any holidays, for example, to decorate a wedding hall. But such a chandelier will look great in the interior of a residential building. Making a paper chandelier is not as difficult as it might seem at first glance. This will require a little patience, time and some necessary materials.

Sheets of beautiful paper.
Wire chandelier base.
Thick threads or twine.
A needle with a large eye so that the string can easily fit into it.
Convenient scissors.
Glue.

But before you start, there are some things to consider.

Chandeliers made of paper flowers look very cute and beautiful. Creating paper flowers does not require much effort and time.

An example of creating paper flowers for a chandelier:

Also very popular are round chandeliers that are made using a balloon.

To create a round chandelier, you need to inflate a simple balloon to the size you need. After this, it is applied to the ball thick layer glue. Next, the ball is randomly wrapped with a thick thread (the surface of the ball resembles a cobweb).
You need to let the glue dry. After some time, when the glue has already dried, you simply need to deflate the balloon, while the dried glue and threads remain in the shape of a circle.
Further, at your discretion and taste, the chandelier can be further decorated with paper or rag flowers.

The idea of creating designer furniture or decorative items with your own hands has always enjoyed special recognition. Have you ever tried to make something interesting, a chandelier for example? At first glance, it seems that nothing worthy will come of this idea, and this is the privilege of designers. Moreover, you need to spend a lot of time buying necessary materials, and have straight arms, otherwise the result will be disastrous. But this is only at first glance. In fact, you can create magnificent beauty from absolutely any things you have at hand or gathering dust in the attic. And there is absolutely no need to be a great master. All you need is a little ingenuity, imagination, free time - and the chandelier, made with your own hands, is ready.

Fluttering tenderness

A great option for a “test of the pen” is a chandelier made of butterflies. It’s very easy to do it with your own hands, and if you use your imagination and slightly change the idea, the result can exceed your wildest expectations. So let's get started.

What will it take?

We can say that you will need nothing at all:

The base of the chandelier itself with a socket and a light bulb (quite suitable from an old one); if desired, it can be repainted in a suitable color;

The frame for the lampshade can be taken from a previous chandelier or use a hoop from a hoop;

Pieces of tulle and ribbon or fabric, the main thing is that the color scheme is harmonious;

Lighter, fishing line and hot gun (matches, strong threads, glue);

You can cut butterflies from fabric, thick paper, plastic, in general, from any material that may be suitable for these purposes and is available;

A shaped hole punch for butterflies; if you don’t have one, you can use scissors.

Let's put this miracle together

First of all, we wrap the hoop with ribbon, securing it on the inside with glue, and decorate it. Cut a ribbon of a different color into small pieces and tie them around the hoop in a circle, making indentations. Instead of scraps of ribbon, you can tie small, neat bows, as your imagination tells you. We singe the edges of the ribbons with a lighter so that the threads do not unravel. We knit pieces of tulle into the free spaces between the bows (shreds). We attach four equal strips of tulle or ribbons to the hoop; they will hold our future lampshade based on the chandelier. Tie them together with a bow at the top.

Let's move on to the butterflies. You can cut them yourself different shapes and sizes. We use multi-colored materials, and, if they allow, we give the butterflies a shape and relief. They can be painted or covered with glitter.

It is better to first unwind and straighten the fishing line so that it does not gather in curls. Place a piece of fishing line on the table and hot glue the butterflies to it with a hot gun. The distance can be completely different. You can insert beads between the butterflies themselves for added beauty and also secure them with glue. Let the glue dry.

Tie the finished sections of fishing line with butterflies to the previously prepared hoop. You can evaluate the overall result and add as many as you wish. The butterflies can be placed either at the same level or along the entire length of the fishing line.

In our case, a chandelier consists of three shades. You can also design the top mount with your own hands, or you can buy a suitable one. It should hide all wire connections, set the distance and fit tightly to the ceiling.

All that remains is to put all the parts together. We connect the wires, attach the lampshades and... enjoy a job well done!

It will take a lot of time, but it's worth it, believe me.

Below is another great option. paper chandelier. Tell me where it is possible to buy one? Unless you do it yourself.

How to make this beauty?

We need a paper lantern, a glue gun and coffee filters. You will need a lot of them; one such chandelier takes almost 400 pieces.

The beautiful airy and fluffy lampshade is ready!

A little bit of nature

DIY chandelier made of wood. Do you think it's difficult? Not at all. Let's look further.

Materials

Here you will need:

Frame from an old chandelier;

Grape twigs and willow vine;

Twine, wire cutters and spray paint.

Front of work

We select grape twigs of suitable size, clean them of all excess and fasten them to the frame of the chandelier with twine. Each branch should smoothly fit against the bends of the metal, braiding it, and be well fixed.

Use willow twigs to wrap the string fixation points. They are more flexible and can be used to cover all difficult places. The DIY wooden chandelier is almost ready, all that remains is to paint it. The color range is very different, from white to blood red.

Another interesting option. A large one is used vine. You just have to give it a shape and weave it into a ball. The vine may not be very pliable; you will have to wet it well and only then form the sphere. In this position it will have to dry. Carefully fix each strip and set the tone for the frame of the chandelier. It’s not a day’s work, but the result is worth it, incredibly beautiful.

With the aroma of Burgundy

What do you do with empty wine bottles, you're probably throwing it away? But in vain. They may turn out original chandelier from bottles. It's quite easy to make it with your own hands. You just need to stock up empty container, preferably not from too dark glass (otherwise the lighting will be dim), a glass cutter, wires and cartridges. Now we will tell you how to make such a chandelier with your own hands.

Master class with bottles

First, rinse the bottles thoroughly and remove the labels. You will need to cut it off afterwards. bottom part. We only need the top one, it will be the lampshade. Draw a straight line with a glass cutter and walk along it, lightly tapping it with a hammer. Afterwards the bottom can be beaten off. Process the edges of the cut; it is better if they do not remain sharp. Place the wire inside the bottle and connect the cartridge. Screw in the light bulb. Ready!

You can use several bottles on the same level or different ones, combine them by glass color or shape. Your imagination has a green light!

However, not only glass bottles can be used. Plastic ones are just as suitable for this role. A little effort - and you will make a chandelier with your own hands! You just need to prepare the material; the more bottles you collect, the better. They can be of different shapes, sizes and colors. Cut off the lower parts, connect them together with fishing line and attach them to the base. Voila! And the best part is absolutely free.

The ideas for creating such unusual things are very interesting. You can invent, complement and create from absolutely everything. The field for activity can be not only chandeliers, but also floor lamps, table lamps and even sconces. They can be changed completely or improved with small additions that will bring harmony to the interior and create even greater comfort. Inspired by such ideas, you can make a beautiful thing not only for yourself, but also as a gift to a loved one.

Fantasize, search and try, and you will certainly succeed. Perhaps you will come up with something special, original. You can make not only beautiful, but also useful things, such as, for example, the popular Chizhevsky chandelier. You can make simple ones with your own hands, but really worth it products. Good luck in your endeavors!

A chandelier in a room is not only lighting device. Without exaggeration, we can say that it is the main decoration of the room. Handmade items are considered especially valuable. This allows us to highlight the special taste of the owners of the home, as well as their extraordinary and creative mind. Undoubtedly, this type The work is quite complex and requires increased concentration. But at the same time, when creating decorations for your home, you can find many interesting and extraordinary solutions in it!

This article presents some ideas for decorating a chandelier with your own hands, as well as instructions for them. Everything is written so simply and clearly that anyone can do it at home.

In order to make a chandelier, sometimes they use the most unusual materials. For example, everyone is already familiar with glass or wood, plastic, and so on. But sometimes, when you want something completely “unusual,” wooden skewers and glass bottles wine bottles, and cans, and all kinds of tree branches, and cardboard, and even straw. You need to choose depending on the idea of the creator and the wishes of the apartment owners. It is also necessary to take into account general interior premises where the finished product is supposed to be placed.

Interesting idea for a chandelier made from plastic spoons

Plastic spoons for disposable meals are one of the simplest and most easily available materials for creating a chandelier for a room. Their advantages are low price, variety color range and such material will last quite a long time for a long time. To create such an extraordinary chandelier, you will need a minimum of investments, both physical and material.

Materials:

empty bottle drinking water, volume 5 liters;
plastic spoons (their number depends on the size of the bottle);
glue for plastic;
an old chandelier (or rather, a socket from it);
sharpened knife.

Process of creation:

First you need to prepare a plastic bottle for subsequent steps. Remove the label in advance, cut off the bottom, dry well.
Then you need to remove the plastic spoons from the packaging and carefully cut off the unnecessary handles with a knife, leaving about 2-3 centimeters above the level of the “scoop”.
You need to glue the scoop blanks to the base of the bottle. Apply to the remaining “tail” a large number of glue and press it to the surface (with the convex side of the spoon facing out). It is necessary to cover the entire bottle in a circle until the entire perimeter is occupied by plastic “spoons”. It is advisable to arrange them in a checkerboard pattern and slightly move them together. This will leave fewer “free spots”.
You need to remove the cartridge from the old unnecessary chandelier, and then place it in an already glued and dried bottle and fix it to the frame.
A decorative bowl can also be made from plastic spoons: “scoops” are glued around the neck of the eggplant.
Install and connect the chandelier, check its operation.

Note! Possible option decorative painting or painting spoons in absolutely any color. Thus, your product will look even more beautiful and more original!

Chandelier made of plastic bottles in the shape of leaves

One more an unusual option The interior will feature a chandelier in the shape of leaves. It is created from simple plastic bottles, the variety of colors of which allows you to work in the most unusual colors and embody the most daring ideas.

Process of creation:

Cut plastic bottles into blanks shaped like future leaves.
For each workpiece, the sheet shape is finally fixed.
Using a soldering iron with a thick tip and a one-sided bevel, you need to slightly fuse the sections of each leaf in order to give the future product the greatest effect.
In the same way, using a soldering iron, you need to give the workpieces a sheet structure. You need to act extremely carefully and accurately, because you can easily make a hole in the plastic. Such a leaf with outlined veins and slightly fused edges will look complete.
Using a hot needle, you need to melt several holes at the “leg” of each leaf in order to attach them.
Using thin wire, form branches and screw them to a steel wire frame.

Also great idea there will be production new chandelier in the form of a lampshade for a floor lamp or a lamp for a table. Thus, it will be a great addition to the previous product!

Chandelier with paper butterflies

The most common product option is a chandelier with butterflies. And this is not without reason. Let's start with the fact that this option looks luxurious and expensive, and secondly, its production does not require any special physical costs. Thus, even a child can participate in creating a chandelier.

Process of creation:

It is based on either an old chandelier or a similar frame. If you don’t have one, then you can take the simplest wooden or metal rim. If such material is not available, then, as an option, you can take thick wire and make about 2-3 skeins, so that a circle is formed.
Cut out butterflies from paper according to the template. You need to take the butterfly template and adjust it to the desired size. The option also looks very unusual when butterflies of several sizes are located on the chandelier (again, depending on desire). Transfer the outlines onto paper and carefully cut out, preferably with a sharpened stationery knife, or small, non-rounded scissors. For the templates themselves, it is better to use a material that is dense, does not become very dirty and does not attract dust. For example, velvet paper is very poorly suited for the product, because in the future you will need to vacuum the chandelier quite often.
Take a nylon thread or transparent fishing line and attach the butterflies to it. There are two types of fastening: either piercing the bodies of the butterflies, or gluing them with silicone glue.
Next, we attach the threads with butterflies to the base of the frame and decorate it.
You can also try a fun variation by making a wire ball! As a basis, you should take a pendant from a chandelier and place several butterfly templates on it using a glue gun.

Fabric chandelier

This chandelier is also based on a frame. As in the previous version, either old metal frames or thick wire are suitable for its manufacture.

After you have pre-prepared the base, start cutting out the fabric from which the lampshade will be made in the future. How long the finished product will be depends on your desire, but it is worth considering that the width of the fabric must be the same as the diameter of the frame! Once you finish the pattern, you need to do a fitting.

Another nuance is that the top of the fabric will need to be sewn directly on the frame, which means that it (the frame) must be solid. Otherwise, if it is possible to thread it directly into the fabric, then you should first fold the top edge of the pattern and stitch it, and then iron it. Then we sew a seam on the side of the product.

To prevent the lampshade from losing its shape, you should pay due attention to the material. If the fabric is too light, “airy,” then the bottom of the product should be weighted. You can use cardboard or fishing line for this.

Carefully sewn fringe, lace or braid will look just as beautiful. But do not “overload” the product! The process of creating a fabric chandelier is similar to making a lace chandelier. So you can safely experiment with the materials that are placed on the frame.

Lamp made of threads and a balloon

Materials:

dense threads, such as wool, cotton, or jute rope - at least 1 meter;
cartridge;
petrolatum;
PVA glue;
a brush for applying glue and Vaseline (it is advisable that the brush does not fade);
1 or 2 pieces balloons(the first in order to work with it, and the second in order to check the finished product, if desired);

Process of creation:

Inflate the balloon to a certain size and secure it. Remember that the finished work will exactly follow the outline of the ball! Using a marker, draw a couple of circles at the top and bottom in order to determine the boundaries of thread winding.
Using a brush, coat the entire perimeter of the ball with Vaseline.
Pour PVA into plastic container and thoroughly process the threads with it (It is not advisable to apply glue to the entire length of the threads at once! Process them as you wind them around the ball!).
Taking into account the boundaries that you drew with a marker, wind the threads around the ball. Do not forget that the future depends on the density with which you wind appearance products.
After wrapping, you need to leave the product for a day until it is completely dry; After complete drying, you need to burst the ball and remove it through the holes.
Cut a spot in the top and insert the cartridge.
To be completely sure that the product is strong, you can insert a balloon into it and inflate it. In a similar way, you can check the flexibility and reliability of the lampshade.

Alternatively, you can paint the structure with a spray can or acrylic paint and attach all sorts of things to it. decorative ornaments, such as butterflies, artificial flowers or beads. Also, a great idea would be to arrange several balls in the form of a bunch of grapes and fasten them together.

Wine bottle chandelier

This version of the chandelier is a little more complex than the previous ones. Making a chandelier this way is quite difficult; the manufacturing process will require care and attention. However, you will like the result!

Materials:

wine bottle;
glass cutter;
sandpaper for sanding edges;
cartridge;
electrical wire;
metal or wooden frame, rim.

Process of creation:

First you need to prepare the bottle itself for further manipulations with it. The first step is to draw a straight line around the perimeter at the level you need. This is required in order to cut off the bottom of the bottle using a glass cutter;
To avoid cutting yourself on the glass, you need to sand the sharp edges with sandpaper;
Pull the wire through the neck of the bottle and then connect the socket;
Attach the bottle to the frame.

You can also decorate the bottle with all kinds of decorative items, or leave it in its original form. In any case, it will look original and impressive.

The number of products on the frame depends on your desire. You can either leave one bottle or secure four or more bottles at once.

Laserdisc chandelier idea

This idea is great for those who have a large amount left in the house. laser discs, but you can’t bring yourself to throw them away. It’s worth noting right away that manufacturing options and the result can be very different. It all depends on your imagination and creativity!

Materials:

two round wooden planks different thicknesses, and which are slightly larger in diameter than disks;
racks made of metal or wood;
Fluorescent Lamp;
magnetic switch;
disks.

Process of creation:

Make a hole in a thicker board and install a starter with a switch in it.
Then connect it all to the lamp.
String disks onto the lamp.
Place the stands around the discs and secure the top.

The finished product will delight its owners for a long time, and it does not require special care. It is not advisable to place this type of chandelier in a child’s room so that the child cannot harm himself (only if the chandelier hangs out of reach).

Shabby chic chandelier

For creating effective lighting in the room, you can also make a chandelier from fabric or beads. The result will be a kind of candelabra or lampshade in the “shabby chic” style.

Materials:

a ready-made metal or wooden frame (or it can be made from an old hoop, garden basket, thick wire);
socket and lamp;
chains and threads for decoration;
all kinds of beads and seed beads.

Working on such a lampshade is not difficult, but it is a very painstaking task. Such chandeliers usually consist of two or three levels of rings, which are located on top of each other. It all depends on the size of the chosen bases. If you take rings of the same diameter, the finished product will be made in the “modern” style.

One of important points is that before you start decorating the chandelier you need to paint and wrap the frames with decorative materials!

The approximate consumption of beads is:

For the lower part of the lampshade - 16 mm beads, about 15-17 pieces per thread;
For the upper part of the lampshade - 12 mm beads, about 35 pieces per thread.

Naturally, when stringing beads on a thread, you can increase or decrease their number or the degree of thread tension. But it is still advisable to stock up on materials in excess of the norm.

The essence of the work is to hang threads with beads in a “waterfall” or “cascade” so that they flow downward along the structure.

In order to create the effect of “muting” the light, you can sheathe the frame with thick fabric.

A DIY chandelier will definitely add a fresh touch, originality and beauty to your interior. You will immediately notice how the room will sparkle with new colors, and your guests will sincerely admire your creativity, hard work and original taste!