How to make a Christmas tree from plastic bottles. Creative DIY Christmas trees - step-by-step master class. Homemade Christmas tree from plastic bottles - Master class with photos

Useful tips

To become the owner of a Christmas tree,you don't have to buy it- you just have to look into useful tips and find out how you can do itbeautiful Christmas tree with your own hands.

Today you can findmany Christmas treesin shops and on the street.

You can put it in the house a natural Christmas tree or branches from a Christmas tree for scent, but to decorate the house, or a gift to a loved one can be done if you know a few interesting tricks.

On our website you will also find:

• 20 small DIY Christmas trees that will decorate any home
  
• How to make a Christmas tree from pine cones
• How to make a Christmas tree

Find out how to make a Christmas tree frompaper, food, fabric and even pasta.

Make a craft like this not difficult at all, and your home will be decorated with unique decor, and friends and acquaintances will be happy to receive a Christmas tree made by you as a present.

DIY paper Christmas tree. Christmas tree made from scraps of magazine pages.

You will need:

Unnecessary magazine or book with bright drawings

Cardboard or thick sheet of paper

Glue gun or PVA glue

Shaped hole punch, optional

Pencil or pen

1. Make a cone out of a thick sheet of paper and secure it with glue.

2. Prepare pages from a magazine with bright pictures and cut out many circles of the same diameter from them. If you have a shaped hole punch (shaped like a flower or a large circle) it will be easier.

3. Wrap the cut circles around a pencil so that they curl a little.

4. Starting from the bottom of the cone, begin gluing the folded circles.

Make neat rows. The circles should be tightly glued to each other so that the cardboard is not visible.

5. Make a small cone from one circle and glue it to the top of the cardboard cone.

The Christmas tree is ready!

DIY Christmas tree made from pine cones and dried citrus fruits

DIY Christmas tree (master class). Christmas trees made of wrapping paper.

You will need:

Large thick sheet of paper

Wrapping

Double tape

Scissors

Decorations

1. Make it from a leaf thick paper cone.

* If your wrapping paper is quite thick, you can bypass step 1 and make a cone out of wrapping paper.

1.1 Fold the paper diagonally, holding one end to keep it sharp.

1.2 Secure the paper rolled into a cone with tape. You don't need to do everything too carefully, since you will cover the cone with wrapping paper.

1.3 Trim off the excess at the bottom of the cone to create a smooth base.

2. Prepare a colorful wrapping paper and cover the cone with it. To do this, place the paper on a flat surface with the pattern facing down.

2.1 Using tape, attach the end of the construction paper to the top of the cone.

2.2 Begin to slowly twist the cone while wrapping it in the wrapping paper. You need to wrap the cone tightly.

2.3 Measure the paper and cut it before completely wrapping it around the cone. Glue double tape to the edges and connect to the other end. You need to cut off the excess at the base so that the paper is even.

3. All that remains is to decorate the Christmas tree as desired. You can make paper stars, use glitter, stickers, glue on beads and/or buttons, wrap with ribbon, etc.

Similar Christmas trees:

DIY fabric Christmas tree. How to make a Christmas tree from felt.

You will need:

Glue or double tape

Scissors

* Try using two colors of felt to make the Christmas tree even more beautiful. IN in this example yellow and orange felt was used.

1. Make a cone out of cardboard. Secure the ends with glue or double tape.

2. Prepare felt and cut circles of different diameters from it, from small to large (see picture). You can use pre-prepared circle templates made from cardboard.

3. Glue Christmas tinsel to the bottom of the cone.

4. Now you need to make a crosswise cut in the center of each circle cut out of felt. Do not cut too much to prevent the felt garment from falling off. Make the cut just enough to fit the circle tightly onto the cone.

5. Start gradually putting circles on the cone. If you are using two colors, then put on the circles sequentially, first one color, then the other. Also worth noting. What to wear next lap It is necessary not only on the cone, but also on top of the tips of the cuts of the previous circle.

6. We decorate the top of the Christmas tree. To do this, simply add tinsel, onto which you will need to add a pre-prepared small felt cone. Secure the tinsel and crown with glue.

* If you wish, you can hide a sweet gift inside the cone.

Original DIY Christmas trees. Glowing Christmas tree.

You will need:

Floral mesh (preferably several shades of green)

Scissors

Cardboard for cone

PVA glue

Cellophane

Pins

Garland

Floral wire

Decorations upon request

1. Make a cone out of cardboard.

2. Wrap the cone in cellophane.

3. Take any container and make a solution of PVA glue and a small amount of water in it

3. Prepare a floral mesh. Cut it into small pieces and place each one in a container with the solution.

4. Start gluing the pieces onto the cellophane-covered cone. Glue pieces of mesh of different shades into different directions. The joints should be coated with another layer of glue for a more durable attachment.

5. Secure the entire structure with pins and wait for the glue to dry.

6. You have now created the first layer of the Christmas tree. Now you need to make a second layer in the same style. After gluing the second layer, leave the structure to dry.

7. Now remove the Christmas tree from the cone - the glue should quickly come away from the cellophane.

8. Place a garland inside the tree, which must be secured with floral wire.

9. All that remains is to decorate the Christmas tree to your liking.

DIY Christmas trees (photo). DIY pasta tree.

You will need:

A cone made of plastic or foam (or you can make it yourself from cardboard)

PVA glue

Pasta various forms and sizes

Spray paint, acrylic paint or gouache

Brush.

1. Prepare a cone and paint it the desired color. Wait for the paint to dry.

*If you are using spray paint, you can skip this step.

2. Prepare the pasta. Start applying glue to each piece and gluing the pieces to the cone. Design your Christmas tree as your imagination dictates.

After applying the glue, press the piece a little and hold it so that it sticks well to the cone. It's okay if the glue is visible from under the pasta.

Continue until you have covered the cone with pasta. Wait for the glue to dry.

3. Start adding color to the pasta. In this example, acrylic paint was used. Try to paint all the parts carefully so that there are no empty spots.

* It is advisable to paint in two layers.

* If you paint it with white paint, the Christmas tree will look like a porcelain product.

Helpful advice: If you want to remove the craft, then put it in a plastic bag first, so you can immediately find the part that might have come off the cone.

We make a Christmas tree with our own hands. Bright paper Christmas tree.

You will need:

Colored cardboard or designer paper

Thick cardboard

Glue moment or glue gun (with hot glue)

1. Cut a square base for the tree from thick cardboard.

2. Insert the skewer into the cardboard and secure with glue.

3. Now you need to cut out circles of different diameters from designer paper or colored cardboard. You need to make 3 circles of the same size.

For example, you want to make 10 circles different sizes, then you will need to cut out 30 circles (3 for each size).

*If you don't feel like cutting out a lot of circles, just shorten the skewer and you'll end up with a cute mini Christmas tree.

4. Make a small hole in the center of each circle.

5. Before you start putting the circles on the skewer, lubricate the hole in the middle with glue.

6. Start placing the circles on the skewer, leaving a little space between them.

7. Cut out stars from paper and attach them with glue to the top of the tree. You can use another part for the crown and not necessarily paper.

Crafts. DIY Christmas trees made from thread.

You will need:

Thick yarn

Yarn with pile

Cone (cardboard or foam)

Pins

Decorations, to taste.

1. Make a paper cone or buy a foam cone from specialized stores.

2. Take both strands and pin their ends at the base of the cone.

3. Start wrapping the threads around the base of the cone, securing with pins approximately every 5 cm.

4. Now start moving towards the top of the cone, carefully wrapping both threads around the future tree. At this stage there is no need to attach the thread to the cone.

5. When you have reached the crown, pin the threads again by wrapping the threads around the crown several times.

6. Both yarns now need to be pulled down, also wrapping the cone in a second layer.

7. At the base of the cone, cut the threads and secure them.

You can leave the tree like this or you can also decorate it.

In this example, artificial berries were used for decoration, but you can use colorful beads, snaps, buttons, etc.

Try also making a decoration for the top of your Christmas tree. The top of the head can be decorated the way you like.

You can leave the tree like this, or you can also decorate it.

You can make just a paper hat or a star, or you can make something more complicated. If you have chosen last option, then the following are instructions for you.

You will need:

Flower wire

Nippers (for wire)

Sequins

PVA glue

Fine wire (calibrated wire)

1. Bend the wire into a star shape (see pictures) and cut off the excess.

2. Cover the star with glue and sprinkle glitter on it.

3. Attach a thin wire to the star, as shown in the picture:

4. Attach a star to your Christmas tree.

Creative DIY Christmas tree

If you want something original, or you simply don’t have enough space for a large Christmas tree at home, you can try making such a simple design.

It is worth noting that such a Christmas tree is suitable for any room. It can be done both at home with children and at work.

This tree can rise 1.5-2 meters and takes up almost no space in the house. In addition, it is a good background for New Year's photography.

You will need:

Foam base or matte cardboard

Scissors

Corrugated paper

Masking tape

Adhesive tape

PVA glue

Stationery knife

Marker, optional

1. Lay out on flat surface foam or cardboard to make a large rectangle (see picture).

2. Use duct tape to connect all the parts.

* In this example we used adhesive tape black for better visibility, but it is better to use white tape.

3. Mark the size of your future Christmas tree using masking tape.

4. Using a utility knife, carefully cut out the shape of the future tree.

5. Prepare corrugated paper, fold it in half and cut the fringe. You should have many sheets of fringed paper to cover the entire tree.

6. Begin carefully gluing the corrugated paper to the foam, starting at the base of the tree. The fringe should hang slightly below the base to cover the foam (or cardboard) and also cover slightly top part tree trunk, which we will make later.

7. Work your way up to the top, covering the entire tree with a bright green coat of crepe paper.

8. Add a hook to the back of the tree so the tree can be hung. Instead of a hook, you can use double tape to cover the perimeter of the tree.

Make or buy? Pessimists or simply lazy people, of course, will object: why make something out of trash.

But it is worth noting that plastic bottles are excellent ready material for crafts. And, in addition, a person’s hands and head work, imagination seeks solutions, develops logical thinking, you can still make money from this.

Let's not invent anything new, but show interesting ideas and the works of wonderful needlewomen, whose inventions are inexhaustible.

Collecting materials , which will be useful to make a Christmas tree from plastic bottles with your own hands:

• plastic bottles with a volume of 1.5-2 liters, ideally green, blue or silver
• scissors
• sharp knife
• thick A4 paper
• narrow tape
• double sided tape
• glue moment or universal
• candle
• ornaments for decoration

First version of the Christmas tree

We do it as in Fig. 1-3. For this:

• Step 1. We collect 2-4 bottles of the same color, or different sizes. The more bottles, the taller the tree will be.
• Step 2. Cutting the bottle sharp knife into 3 parts, separating the neck and bottom.
• Step 3. We use the bottom as a stand; for strength, cover the inside with plasticine, for example, or stick decorative pebbles on top.
• Step 4. We make the barrel out of thick paper, which we roll into a tube and insert into the neck. It is better to fix the free edge of the tube with glue or double-sided tape. For the trunk, you can also pick up a ready-made tube, which you may have lying around on the farm.
• Step 5. We cut the middle part lengthwise, then into rectangles of equal width, from which we will make branches. One bottle will yield 3 rectangles; for a Christmas tree, 9-12 pieces are enough. Every 3 pcs. make the length shorter by a couple of centimeters.
• Step 6. In each workpiece we make fringe needles with scissors, without cutting the strips to the end of 1-1.5 cm. The narrower the stripes, the fluffier the tree will be.
• Step 7 To make the fringe curly, using a dull knife blade, holding it with your thumb, stretch the strips a few pieces at a time, i.e. not all at once. It's not easy, but it will be effective.
• Step 8 All that remains is to attach our branches to the trunk. We begin to wind the longest fringe around the trunk from below, then overlap the next one, securing each branch with tape. And so on to the very top. If the trunk turns out to be longer, just trim it carefully
• Step 9 For the top of the head, you can use one of the blanks, rolled into a tube or other prepared decoration
• Step 10 We decorate the finished Christmas tree as your imagination dictates, but it’s better to let the children do it.

Helpful advice: you can start decorating the Christmas tree at the manufacturing stage. Decorate or cover your workpieces with decorative sparkles and sequins, paint the edge of the fringe, for example, white.

Fig 1 - Option 1 (what should happen)
Fig 2 - Option 1. Manufacturing stages 1-7

Fig 3 - Option 1. Manufacturing stages 8-12
Fig 4 - Herringbone. Option No. 2

That's all, the green Christmas tree from a plastic bottle is ready!

The second version of a Christmas tree made from plastic bottles

For this Christmas tree you will need several plastic bottles, either colored or can be pre-painted. Figure 4 shows all stages of the work.

Step-by-step description of the process:

• Step 1. Using a sharp knife, cut off the bottom of all bottles. We leave one bottom for the base-stand, do not throw away the rest, they will be useful for other ideas.
• Step 2. We cut the upper part into approximately equal strips 2-3 cm wide, without cutting to the end of the neck. The result was twigs. It is clear that the more bottles, the taller your beauty will turn out.
• Step 3. Next, on each branch we make parallel cuts on both sides, i.e. imitation of needles, which we bend in a chaotic manner. Looks like it turned out like fir branches? Then let's continue.
• Step 4. For the prepared stick-barrel or maybe you have a suitable metal one, plastic pipe, we string the bottles sequentially. All neck down and start with the largest one if you have them of different sizes. No glue or tape, tightly to each other.
• Step 5. We make the stand, as in the previous model of the Christmas tree, with some nuances:
  - we take into account that the structure will be heavier - once;
  - on the ends of the barrel, we fasten the plugs so that it does not jump out of the hole, and on the other side, in order to secure all the bottles put on - two.

You may have to use male help and ingenuity.
Here is another version of the Christmas tree, all that remains is to decorate it.

Two original green beauties

The third design option in Fig. 5. The principle of making a Christmas tree from plastic bottles with your own hands, as you understood from the previous options, is similar.

Let's take a quick look features of this option:

1. In this case, the middle of the bottle is cut into squares.
2. Using a prepared stencil, cut out circles from squares.
3. In the middle, use a hot nail to burn holes in each piece.
4. We make strip cuts in a circle, not reaching the middle by about 1 cm.
5. Then the resulting needles can be slightly curled, as in the first option, or melted at some distance above the candle.
6. For the stand, we use the bottom of the bottle, where we also make a hole and insert either a skewer, or sushi chopsticks are perfect.
7. We put the twigs on the resulting trunk, but there is one caveat: you need to come up with some kind of detail to put on between them - it could be a cork, it’s great if you can find large beads with a suitable hole. We decorate either each detail before assembling it, or the finished Christmas tree.

Fourth option Fig. 6.

Fig 5 - Green beauty. Option #3
Fig 6 - Green beauty. Option number 4.

In addition to the above, prepare a cork from wine bottle, a strip of foam rubber, a hard plastic cup.

The action plan is:

1. The first step is all the same as in the previous options - we cut rectangles, then we make various stars out of them - these will be the “paws” of the spruce.
2. Let's hold the resulting pieces over the fire just a little bit so that they bend slightly.
3. We will make multiple cuts at the tips of the “legs” - this will make it more beautiful.
4. Now we will glue a piece of foam rubber to the parts, the result will be a pyramid.
5. The trunk of such a Christmas tree will be a cork plug.
6. Drop a little glue into the glass and attach the cork to the bottom.

The Christmas tree made from plastic bottles is ready, you can give it as a gift New Year!

At the bottom there should be the largest bottles (2 and 1.5 liters, in the middle - liter bottles, and at the top 0.5 and 0.3 liter bottles. If you have bottles of the same volume, then adjust the length of the “branches” yourself by cutting stripes up required length.

Make a hole in the left bottom, which you secure to the lower end of the stick using a plastic bottle cap (you can hammer a nail in for strength).

Place the last, smallest piece, neck up, on the upper end of the stick and screw the green plug onto the neck, also securing it with a nail for strength.

A little patience, perseverance, effort and the forest beauty is ready!

Such Christmas trees can be used as New Year's decoration your houses!

Method 2. To make such a Christmas tree you need a minimum of time and expense. A master class on making a Christmas tree from plastic bottles will tell you in detail how to make such an original one. New Year's craft

To make a decorative New Year's craft: a Christmas tree from plastic bottles, you will need the following:

1. Plastic bottles - 3 pcs;
2. Scotch;
3. A sheet of thick paper, ideally whatman paper (A4);
4. Scissors;

Method 3. And finally, the last option for today is a Christmas tree made from plastic milk bottles (what decorative New Year trees are not made from...). The design is completely collapsible, has maximum resemblance to the original, does not require special complex technologies and specific work skills, there are no problems with bottles either, and a holiday is just around the corner...

Materials and tools

The material for making the Christmas tree is a milk plastic bottle or part of it (Fig. 1). To make a homemade tabletop Christmas tree, you will need 5-20 milk/kefir plastic bottles with corrugation at the bottom. The number of bottles determines the number of branches and tiers. The more branches, the more fluffy the Christmas tree is; the more tiers, the taller it is.

In addition to bottles, you only need scissors and plastic rivet technology

Plastic rivets

To implement the technology of plastic rivets, it is necessary to have a means for melting (installing) the rivets and the rivet itself. You need to manage to melt the head of the rivet using a hot nail or lighter. You can do this in the same way with a well-heated soldering iron. In addition, you will need clamps and tweezers to install rivets in hard-to-reach places.

For plastic rivets, it is very important to choose the material. After fumbling for about a year, through trial and error, taking into account the requirements of strength and availability, I identified several sources for obtaining plastic rivets:

1. Empty ballpoint pen refills. Enough available material. They are good because they are colorless and the compound, with their help, turns out to be organically integrated into the product made from plastic bottles. Such a rivet turns out neat, with a round head, however, it has a slightly reduced tensile strength. In addition, the rod from ballpoint pens is round in cross-section and completely fills the drilled hole in the parts being connected. By the way, the walls of the rods are different thicknesses, for rivets it is better to use rods with thicker walls.

2. Chupa Chups sticks. Similar to option No. 1 only in color. The connection is more cumbersome, and the rivet head melts with difficulty (it either burns, becomes ugly, or unreliable).

3. The most perfect option, and very convenient (I give the world a suggestion) to use material from buckets with construction mixtures for 3, 5, 10 liters There are quite a lot of them left after repairs, and even one lasts for a long time.

From the walls of such a bucket you need to cut a ring, and cut the ring along the generatrix (this is the only way) into strips 2...4 mm wide, length from 4 to 15 cm. These will be the blanks for rivets, and, moreover, the best and most affordable, in almost unlimited quantities quantity.

Obtaining a connection using such rivets is simple. It is more convenient for this to prepare rivets of the required length in advance, melting the head of the plastic rod on one side. To connect two parts with plastic rivets, we overlap the parts and melt them with the same burner, forming a hole the desired profile and sizes, insert a rivet there and, by melting, form a head from the opposite end of the rivet rod. After practicing reflowing several times, the head turns out neat and tear-resistant.

Let's get started...

To implement the idea it is necessary raw material in the form of a part of a milk plastic bottle (Fig. 1a) which is cut along the circumference into two components (Fig. 2 and Fig. 3, respectively). A trunk will be formed from the part adjacent to the neck (Fig. 1b), and branches of the future will be cut from the ring with a central groove (Fig. 1c). Christmas tree. One whole plastic bottle produces two or three rings. The more rings you prepare, the fluffier and taller the Christmas tree you can assemble. I had at least 20 of these rings (10 full bottles).

Plastic rings with a groove in the middle need to be cut into several equal parts(Fig. 2) along the generatrices of the bottle cylinder. As a result, we get convex rectangles. If you cut into 2 parts, then from such long halves you will get long lower branches of the Christmas tree, if you cut into 3 equal parts, you will get branches of medium tiers and medium length, and cutting into 4-5 parts, you get small blanks for the upper tiers of a tabletop Christmas tree . It is not at all necessary to observe particular uniformity in the dimensions of the rectangles for one type of tiers.

Next begins the rather tedious work of forming the branch. From each plastic convex rectangle (Fig. 3a), a wedge-shaped blank should be cut out with scissors (Fig. 3b). The axis of symmetry of the wedge-shaped part should be located along the corrugation groove. Immediately after cutting the workpiece, “needles” should be formed on it, making cuts along the side edges at approximately 45 degrees to the groove and radially at the end of the “branch”. (Fig. 3c). The needles are alternately moved out from the plane of the workpiece, also at 45 degrees to each other. Placing the needles up and down relative to the plane of the branch provides fluffiness to the Christmas tree.

As a result of such painstaking work, several sets (Fig. 4) of branches of different sizes are obtained for a desktop homemade Christmas tree. Cutting out branches and then needles is quite a long task, but you can entrust this to your family as part of a collective creativity in decorating life for the New Year. It should be noted that it is difficult to accurately determine the number of branches forming a specific tier by eye, so you should always have several rings in stock (Fig. 1c) for cutting branches during the installation of tiers

The place for attaching branches is the trunk, which consists of several parts (logs). The top parts of plastic bottles (Fig. 1b) were considered waste during the separation of the rings (Fig. 1c), but now they are also used in tree making to create a trunk. The base of the trunk and the lower log is the full neck part of a plastic bottle (Fig. 5a). The upper logs are assembled from blanks obtained by cutting off the threaded part of a milk bottle with a flange, as well as removing a segment of plastic along the generatrices (Fig. 5b, 5c). The segments need to be rolled into a tube and secured on both sides with plastic rivets. In a similar way, it is necessary to create several logs to attach tiers of branches. In my case, these are 3 logs, but there could be more or less. For a miniature Christmas tree, 3-4 tiers of branches on just one log are enough.

Naturally, the diameter of the trunk should taper towards the top of the tabletop tree and the diameter of the upper log should be smaller than the lower one. The larger the cut of the segment, the higher the log obtained from the conical top of the plastic bottle. For the top you need a half segment, and for the middle part about two-thirds of the whole neck (Fig. 5b). The diameter of the lower hole of the upper log should be approximately 1 mm larger than the upper hole of the lower log forming the trunk.

It's time to attach the branches to the "logs". Each log will need to place 2-3 tiers of branches. The small number of tiers does not allow effectively covering the rivet heads with branches, and a large number of spoils the aesthetic appearance of the Christmas tree. In each tier of this design you can install from 4 to 10 branches. Fastening is carried out using plastic rivets, since you will need quite a lot of plastic rivets, it is better to prepare them for future use. The easiest way is to place the branches in tiers on the lower logs (Fig. 6), since the neck of the plastic bottle is wide enough and it is convenient to hold the plastic rivet with inside finger.

If you place the branches closely along the circumference of the tier, then one rivet is enough to attach the branch to the trunk (Fig. 6-8). For those who like greater reliability, they can install two rivets side by side. The tiers of branches must be formed like the roof deck of a house - from the bottom up, then the branches of the upper tier will cover the rivets of the lower one and the heads of the rivets will be completely invisible.

In my case, in the lower (Fig. 6) and middle (Fig. 7) log of the trunk there are 2 tiers of branches, and in the upper one - 3 (Fig. 8). There are 5 tiers of branches in total. It’s quite enough to look amazingly similar to a real tree. Installation of plastic rivets on upper tier, due to its small diameter, should be done using tweezers or a medical clamp.

After securing all tiers to all logs, you can begin final assembly. But first it is advisable to decide on the top. In my case, without thinking for a long time, I built the top using the same technology as the trunk (Fig. 5), that is, by rolling the plastic into a cone. But you can do this in another way, for example, in the form of an asterisk or a ball (I like the cone better). The top of the tree is attached to the upper element of the trunk also using a rivet, installed from the inside and melted from the outside. The upper part of the trunk, together with the top, is already miniature in itself table Christmas tree(Fig.9). You can install it on your monitor and enhance the holiday feeling...

A living Christmas tree grows from the bottom up, in the same order, and we collect logs with tiers of branches by adding “logs” (Fig. 10) to the already existing Christmas tree. It is better to connect the trunk elements together in a place covered by a branch, at three points along the circumference of the trunk. In this case, the trunk becomes rigid and will not break if the Christmas tree accidentally falls to the floor from the table, the Christmas tree is a tabletop one...

And if you insert a dynamic light part (for example, a garland) inside the Christmas tree, then New Year's Eve she will amaze those around her with her charm:

Here is such a master class. Of course, it’s a little complicated, but what a beauty it turns out!

1. Christmas tree made from plastic bottles

Prepare a Christmas tree like this green plastic bottle, scotch, scissors(such that they can easily cut a plastic bottle, Whatman tube. The only thing you can add to such a Christmas tree is to decorate it with beads, gluing them to the Christmas tree with glue. You can hang a rain ribbon. You can make this craft with your children. Next, we do everything as in the photo:

To make a decorative New Year's craft: a Christmas tree from plastic bottles, you will need the following:

1. Plastic bottles - 3 pcs;
2. Scotch;
3. A sheet of thick paper, ideally whatman paper (A4);
4. Scissors;

So, cut the bottle as shown in the photo below. That is, it is necessary to cut off the bottom and neck so that a straight pipe from the bottle remains.

Cut each plastic bottle lengthwise into 3 equal parts and then adjust their sizes so that each subsequent tier is slightly smaller than the previous one. Then each workpiece must be “dissolved into needles.” The neck of one of the bottles will serve as a stand for our future New Year's craft.

The next step is to roll the Whatman paper into a tube. We insert it into the neck of the bottle and secure it with tape in a circle.

You can decorate the top of our New Year's tree with a homemade Christmas tree toy or complete the tree the way we did.

If you want to make a fluffier Christmas tree from PET bottles, like the one in the photo below, when making the Christmas tree, you need to cut the needles as thinly as possible (more often).

2. For Christmas trees made from plastic bottles you will need green bottles various volumes and a wooden stick, slightly smaller in diameter than the neck. The length of the stick will determine the height of the tree and the number of bottles.

I guess it's ready)

4. Another very interesting option

For production we will need:

• scissors
• green bottle
• cork plug
• round glass of cottage cheese dessert
• candle
• glue.

Also find foam rubber. We cut a piece of a kitchen sponge for washing dishes.

First, cut the green bottle into squares or circles of different sizes. For the bottom of the Christmas tree, the width of the square should be at least 6-7 cm, for the middle - about 5 cm, for the top of the head 2-3 cm is enough.

Now, using scissors, we densely break through the edges of the stars. You can call your household for help. In fact, the work is painstaking and requires a lot of patience. Edging the edges takes approximately 30 minutes. To make the spruce paws look more natural, we bring the plastic to the flame of a candle. The tips of our coniferous branches will gracefully curl down. Here is the finished result.

It's time to apply glue and foam rubber. Cut the sponge into small pieces (1x1 cm).

Now we lubricate the largest spruce paw with glue, and put a cube of foam rubber on top. Add glue again and cover it with green plastic.

We continue working until we run out of parts. Don’t forget that we are “building a pyramid”, and therefore with each subsequent gluing we focus on the size of the plastic star.

All that remains is to design the trunk of the coniferous tree. Of course, its role will be played by a cork plug. However, to make the craft resistant to tipping over, we will place a small yellow bucket in the tree. Let's cut it out of a round cup.

Lubricate the bottom of the bucket with glue and place a cork barrel in the center. Set aside the part for 2-3 minutes, let it dry completely.

We connect the crown with the trunk. The result was a slender emerald Christmas tree made from plastic bottles. A real forest beauty.

Bottom line

5. By the way, the Christmas tree also looks quite creative with larger “branches”
We cut the bottle into 3 parts. Only make cuts in a circle towards the center, straight.

A puncture is made in the center with an awl and the needles are bent up and down in order. A puncture is made in the lid of the cream or mineral water into which a skewer of the required length is inserted.

The parts are strung in descending order, with a large bead placed on top of the glue. The Christmas tree can be decorated with polystyrene foam, rain, etc.

Glue the Christmas tree onto the disk stand.
The Christmas tree is ready

A wonderful winter holiday is approaching - New Year 2019. It's time to decorate your house for its arrival, so that Santa Claus on his magic sleigh does not pass by and leaves good gifts under our tree. It is very interesting to decorate the Christmas tree and rooms with homemade toys for the holiday. The process of making them is fascinating, as is any creativity. Such crafts can be made from the most simple materials, for example, from plastic bottles. From ordinary plastic bottles you can make a lot of interesting and beautiful things that can successfully replace store-bought analogues. Our story today is dedicated to the 7 best and original crafts from plastic bottles for the New Year 2019, which will be held under the sign of the Yellow Earth Pig. Let's look at them in detail in our article.

Christmas tree

Unusual Christmas tree can be made from simple plastic bottles. It is important to collect necessary materials for this craft and follow the master class step by step.

To do this you will need:

• Plastic bottles;
• Scotch;
• Sandpaper (cardboard);
• Scissors.

Progress:

1. The bottom and neck of the bottle should be removed, and then you will get a straight pipe. Then you should prepare blanks from twigs. They must be of different sizes so that the Christmas tree turns out to be cone-shaped.
2. Then the plastic bottles need to be cut lengthwise into 3 parts so that subsequent tiers are smaller than the previous ones. You need to make needles on each workpiece, and to do this they are cut into thin strips, but not completely. To make the Christmas tree stand stable, it is advisable to use the bottom of one of the bottles as a stand.
3. A sheet of cardboard needs to be rolled into a tube and placed in the neck of the bottle. You can secure it with tape. Now each tier of branches needs to be secured to the tree. You can install a toy on the top or come up with something else. To make the Christmas tree fluffy, the needles should be cut thinner. Usually blue or transparent bottles are used for this. That's all, our craft is ready!

Christmas balls

You can decorate your Christmas tree with handmade toys. In your work, it is important to follow all the steps step by step, and then you will get wonderful products.

To do this you will need:

• Plastic bottle;
• Glue;
• Rain;
• Any shiny jewelry.

Progress:

1. The paper needs to be wrapped around the bottle: this will help mark the workpieces on it. It is necessary to cut 4 rings 1 cm wide. Then the rings must be fastened together using the “crosswise” principle and secured with glue. The result should be a ball of plastic strips. You need to choose beautiful threads or rain so that the toy can be used for the Christmas tree.
2. To decorate the resulting blanks, it is better to use foil, beads, seed beads, etc. You can place inside such a ball small ball. You can use as much imagination as you like with this craft. This will be a very interesting activity for children.

Snowflakes from plastic bottles

To expand the range of crafts made from plastic bottles for the New Year 2019, as Christmas tree decoration You can also make snowflakes from the bottoms of bottles. This process will also be possible for beginners in this creative endeavor.

To work you will need:

• Scissors;
• Acrylic paints of white, blue, gold, silver - to choose from;
• Plastic bottles, preferably blue;
• Paint brush;
• Wire;
• Pliers.

Progress:

1. We take plastic bottles and, using a utility knife or scissors, cut the bottom as low as possible to the base, leaving only the corrugated part.
2. After the bottoms are ready, we begin painting our future snowflakes. Depending on the desired design, select the thickness of the brush, and then start painting. As drawings, you can use various ornaments that come to your mind. This also applies to the choice of paint color with which you will decorate your New Year's product.
3. Once your snowflake has turned into a beautifully painted masterpiece, give it time to dry while you use wire and pliers to make a small eyelet for the thread. Attach it to the snowflake and thread the thread into this ring.

Well, ours is ready New Year's toy for a Christmas tree decoration that you can now be proud of. A DIY snowflake can serve worthy decoration not only your home, but also kindergarten if you have Small child, and also act as an exhibit at an exhibition at the school of New Year's products.

Penguins made from plastic bottles

An original New Year's decoration for your home for the New Year 2019 can be penguins made from plastic bottles, which should be placed in the rooms and under the tree as decoration. This craft will delight all your family and guests, and especially children. Without spending a lot of time, you will create with your own hands a real masterpiece art that will cause a lot of positive emotions and sincere smiles in your household.

To work you will need:

• Plastic bottles (one toy takes two bottles);
• Scissors;
• Acrylic paints - white, black, red and others;
• Brushes;
• Small colored scraps for a scarf;
• Buboes or bows for hats;
• Glue.

Progress:

1. We take the bottle and cut off the top part almost completely or half to get the body of a penguin. The head is made from another bottle and also from the lower part, but the workpiece should be slightly smaller.
2. We connect both blanks by inserting the upper part, which is smaller, into the lower part, which is larger.
3. After you have built the penguin's body, start painting it. Take acrylic paints and apply carefully to plastic product, imitating the color of a penguin, as shown in the photo. Use more bright colors, because the brighter your New Year's penguin turns out, the warmer and more cheerful the smiles of your family will be.
4. When your penguin takes on a realistic look, you can tie a small scarf around its neck and attach a bubo or bow to its cap using glue.

What a cartoonish miracle you have created!

Video tutorial on making penguins from plastic bottles

Golden bells

Golden bells will look original on the New Year tree. This work is done very quickly and is suitable for kindergarten.

To do this you will need:

• Plastic bottles;
• Acrylic paint, if desired instead acrylic paint you can use fabrics, ribbons and accessories.

Progress:

1. For work, you should take 0.5 liter bottles, but more is possible if the tree is very large. The bottom of the bottle should be cut off. To make bell petals, you need to cut the edge of the bottle in a zigzag shape. Because the resulting edges will be sharp, care must be taken.
2. The petals of our craft need to be made pointed, and you can use a knife to give them shape. To make holes for the rope, you need to heat the knitting needle and make holes. You can do this work with scissors, but be very careful. At the end of the work, the bells should be painted, and they will dry within an hour. To give the products a New Year's look, they need to be decorated with tinsel, garlands or sparkles. The instructions are simple, and you can do the work in your own sequence.

Candlesticks made from plastic bottles

To do this you will need:

• Plastic bottles;
• Scissors;
• Glue gun;
• Universal glue.

Progress:

1. You can make a wonderful candlestick for the holiday with your own hands. You can use bottles different colors. The containers need to be cut in half. The edges of the part that remains with the bottom should be cut into strips, not reaching 4 cm. The strips can be of different widths. The resulting container will be a candle stand.
2. Strips of plastic should be melted over a candle. Then use a glue gun to attach the candle to the foil. The space around the candle can be decorated with beads or stones. This way the candlestick will have little weight, and our craft is ready.

Video master class on making candlesticks

Cone

You can make original cones with your own hands; this craft from a plastic bottle will perfectly decorate your Christmas tree and home for the New Year 2019.

To do this you will need:

• Plastic bottles;
• Scissors;

Progress:

1. You need to create squares from a plastic bottle, after which their corners should be rounded. The result will be products like chamomile. After this, you need to treat the edges of the petals with a candle so that they fall down.
2. All parts must be strung on a thread in descending order. A bead must be inserted between them. Then you need to make a spruce branch and secure it to the pine cone. The product is ready to create a festive atmosphere.