How to cut a Christmas tree from a plastic bottle. Christmas trees made from plastic bottles. Topiary tree made from pine cones: master class with photos and instructions

Creative Christmas trees are good because they are unusual; they can be created from the most different materials, and edible trees will become a decoration and the main highlight of the New Year's table.

How to make a Christmas tree from plastic bottles?

• green plastic bottles;
• scissors;
• scotch;
• a wooden stick, the diameter of which is slightly smaller than the hole in the neck of the bottle.

The blanks must be fastened in such a way that the largest ones are at the bottom and the smallest at the top.

• green plastic bottles;
• scissors;
• a wooden stick of a suitable size.

Place pre-made parts on the stick, starting with the largest bottle and ending with the smallest one.

Secure these elements with tape, arranging them in ascending order, starting with large and ending with small.

If, for example, you work in grocery store, then you can put here a large Christmas tree made of plastic bottles, which will certainly attract buyers. To do this, you need to arrange the bottles in a circle in rows, and place plywood circles on them. Each subsequent tier is smaller than the diameter of the previous one. There should be 3 bottles left closer to the top; place a star on top.

Making a Christmas tree out of paper with your own hands - master class

Once magazines are read, they are usually thrown away. But you can do it differently, make a paper tree. To create it, you can use newspapers and old books.

• a sheet of cardboard or whatman paper;
• colorful magazine;
• shaped hole punch;
• glue gun or PVA;
• pencil.

If you like clean lines, then check out the next option.

• whatman;
• double tape;
• wrapping;
• regular tape;
• decorations;
• scissors.

• skewer;
• designer paper or colored cardboard;
• thick cardboard;
• glue or glue gun.

• foam or cardboard;
• green corrugated paper;
• scissors;
• adhesive tape;
• masking tape;
• marker;
• PVA glue;
• hook;
• stationery knife.

Cut the strip corrugated paper, chop it with scissors in the form of a fringe, slightly short of reaching the opposite edge. Start gluing these decorated ribbons from the bottom.

Christmas tree made of fabric and threads

• felt;
• cardboard;
• scissors;
• double tape or glue.

It is better to take material in two shades, then the creative Christmas tree will look more contrasting.

You can also make a very cute tree from threads.

• a cone made of foam plastic or cardboard;
• fleecy yarn;
• pins;
• decorations;
• thick yarn.

You can make a chocolate base and attach the berries to it with the point outward using a toothpick.

Edible Christmas tree: step-by-step preparation

• wooden skewer;
• apple;
• cucumbers;
• red and yellow sweet peppers;
• plate.

Place the apple half cut side down on a platter or plate. Stick a skewer into it. Chop the cucumber into not too thin slices.

Place these slices on a skewer, starting with the largest one. Arrange them in a checkerboard pattern or approximately so that they look like Christmas tree branches.

Cut small pieces from red and yellow peppers. Place them on some cucumbers or secure them with toothpicks. Thread an elongated piece of pepper onto the top of the head, closing the skewer on top.

You can decorate a New Year's dish with this tree, for example, a salad. Place a little parsley along the edge of the plate, which will symbolize green grass.

The next tree consists of fruits, berries and vegetables. Take:

• large carrots;
• apple;
• kiwi;
• strawberries;
• toothpicks;
• grape;
• greenery;
• hole for removing the core from apples.

Place the carrot in the hole. Stick toothpicks into it. Thread kiwi halves, strawberries and grapes onto them. The star can be cut from a suitable fruit or vegetable, or from a thick piece of cheese. Decorate a plate with greenery to make the tree look even more picturesque.

The next tree is made from apples. To prevent them from darkening, the cut slices should be dipped in a solution of lemon juice for 15 minutes.

First you need to cut out the middle of the apples, then chop these fruits into circles. Using a knife or a special notch, give these blanks a star shape. Place it on a plate and place a slightly smaller piece on top. Adhering to this tactic, lay the Christmas tree to the end. Decorate it with cranberries and physalis.

If you don't have leeks, then you can garnish the salad with dill. Look at the photos to see how to arrange the branches, starting from the bottom.

If you have green pepper, turn its slices into lush spruce branches and make a New Year's tree from this edible material. Circles and slices of lemon or grapefruit will also become a picturesque decoration for the New Year's table.

If you use kiwi for this, use unripe ones so that the circles stick tightly to the base.

Vegetarians and connoisseurs proper nutrition They will be able to make a Christmas tree out of broccoli, decorate it with cherry tomatoes, and make a star out of sweet peppers. The asparagus stalks will turn into a tree trunk, and cauliflower- into white snowdrifts.

I don’t know about you, but I really feel sorry for the skinny and feeble Christmas trees that are sold every year. Yes, of course, a real Christmas tree (which is cut down in the forest for one, or at best, two weeks for our pleasure) brings the aroma of pine needles and the smells of the forest into the house, but these effects can be achieved with spruce branches, and even with cones.

I suggest you take care of Mother Nature and make a Christmas tree with your own hands from plastic bottles. This beauty will serve. Let's start creating a large, light, environmentally friendly New Year's beauty from plastic bottles.

Take a thoroughly washed plastic 2-piece liter bottle green (you can also use white - a matter of taste and desire). Use scissors to cut off the bottom.

Cut the bottle into strips approximately 1.5 cm wide. The edges of each strip should be rounded to avoid damaging your eyes.

Using a regular candle, give each strip the shape of a twig as shown in the photo.

We take another bottle, cut off the bottom and insert a metal or plastic pipe. This entire structure needs to be inserted into a flowerpot and securely secured with pebbles or sand (the heavier, the more stable).

Advice:When assembling, in order to maintain the shape of the tree, switch from bottles bigger size to smaller bottles. For the top you can use 1 liter or maybe even 0.5 liter bottles.

That's all. All that remains is to decorate your Christmas tree with toys, for example these. What do you think they are made of? Go

, the section of the site where EVERYTHING is presented homemade Christmas trees and ALL options What can you make a Christmas tree out of?

Step 1: Preparing materials

To find and obtain the nearly 300 bottles needed to make the plastic bottle tree, I spent two mornings rummaging through a landfill trying to collect enough to build a Christmas tree.

Other items I picked up:
- Lots of glue sticks
- Old rusty milk crate
- A couple of paper grocery bags
- Old Christmas lights
- Several food buckets

Step 2: Cleaning

This is the easiest step, I threw the bottles into the bathtub and filled it with water.

Step 3: Start assembly

I started by drilling holes in the bottle caps. Then he pushed the garland bulb inside and secured it with hot glue from a gun. I then taped the bottles together to make a plastic bottle tree. As you might have guessed, I started with one bottle at the top and made the Christmas tree wider and wider as I went down.

Step 4: Start Maintaining the Christmas Tree

At a certain point, about 3 feet down, I inserted a small bucket to use as a base. I then installed it on another bucket and then installed the whole thing on an old milk crate. I then proceeded to glue the glow bottles together to make a plastic bottle tree.

Step 5: Star

While I was digging through the dump looking for bottles, my friend found these interesting plastic pieces. She took them home and used a hot glue gun to turn them into gorgeous stars.

Step 6: Covering with Bark and Turning On

I covered the base of the tree with torn paper from a shopping bag which made it look a bit like bark... Well I guess all that's left is to include the one I made Christmas tree made from plastic bottles.

Oooh, how wonderful this is....

A wonderful winter holiday is approaching - New Year 2019. It's time to decorate your house for its arrival, so that Santa Claus on his magic sleigh does not pass by and leaves good gifts under our tree. It is very interesting to decorate the Christmas tree and rooms with homemade toys for the holiday. The process of making them is fascinating, as is any creativity. Such crafts can be made from the most simple materials, for example, from plastic bottles. From ordinary plastic bottles you can make a lot of interesting and beautiful things that can successfully replace store-bought analogues. Our story today is dedicated to the 7 best and original crafts from plastic bottles for the New Year 2019, which will be held under the sign of the Yellow Earth Pig. Let's look at them in detail in our article.

Christmas tree

An unusual Christmas tree can be made from simple plastic bottles. It is important to collect necessary materials for this craft and follow the master class step by step.

To do this you will need:

• Plastic bottles;
• Scotch;
• Sandpaper (cardboard);
• Scissors.

Progress:

1. The bottom and neck of the bottle should be removed, and then you will get a straight pipe. Then you should prepare blanks from twigs. They should be different sizes so that the Christmas tree turns out to be cone-shaped.
2. Then the plastic bottles need to be cut lengthwise into 3 parts so that subsequent tiers are smaller than the previous ones. You need to make needles on each workpiece, and to do this they are cut into thin strips, but not completely. To make the Christmas tree stand stable, it is advisable to use the bottom of one of the bottles as a stand.
3. A sheet of cardboard needs to be rolled into a tube and placed in the neck of the bottle. You can secure it with tape. Now each tier of branches needs to be secured to the tree. You can install a toy on the top or come up with something else. To make the Christmas tree fluffy, the needles should be cut thinner. Usually blue or transparent bottles are used for this. That's all, our craft is ready!

Christmas balls

You can decorate your Christmas tree with handmade toys. In your work, it is important to follow all the steps step by step, and then you will get wonderful products.

To do this you will need:

• Plastic bottle;
• Glue;
• Rain;
• Any shiny jewelry.

Progress:

1. The paper needs to be wrapped around the bottle: this will help mark the workpieces on it. It is necessary to cut 4 rings 1 cm wide. Then the rings must be fastened together using the “crosswise” principle and secured with glue. The result should be a ball of plastic strips. You need to choose beautiful threads or rain so that the toy can be used for the Christmas tree.
2. To decorate the resulting blanks, it is better to use foil, beads, seed beads, etc. You can place inside such a ball small ball. You can use as much imagination as you like with this craft. This will be a very interesting activity for children.

Snowflakes from plastic bottles

To expand the range of crafts made from plastic bottles for the New Year 2019, as Christmas tree decoration You can also make snowflakes from the bottoms of bottles. This process will also be possible for beginners in this creative endeavor.

To work you will need:

• Scissors;
• Acrylic paints of white, blue, gold, silver - to choose from;
• Plastic bottles, preferably blue;
• Paint brush;
• Wire;
• Pliers.

Progress:

1. We take plastic bottles and, using a utility knife or scissors, cut the bottom as low as possible to the base, leaving only the corrugated part.
2. After the bottoms are ready, we begin painting our future snowflakes. Depending on the desired design, select the thickness of the brush, and then start painting. As drawings, you can use various ornaments that come to your mind. This also applies to the choice of paint color with which you will decorate your New Year's product.
3. Once your snowflake has turned into a beautifully painted masterpiece, give it time to dry while you use wire and pliers to make a small eyelet for the thread. Attach it to the snowflake and thread the thread into this ring.

Well, our New Year's toy for Christmas tree decoration is ready, which you now have the right to be proud of. A DIY snowflake can serve worthy decoration not only your home, but also kindergarten if you have Small child, and also act as an exhibit at an exhibition at the school of New Year's products.

Penguins made from plastic bottles

Original New Year's decoration Your home for the New Year 2019 may include penguins made from plastic bottles, which should be placed in the rooms and under the tree as decoration. This craft will delight all your family and guests, and especially children. Without spending a lot of time, you will create with your own hands a real masterpiece art that will cause a lot of positive emotions and sincere smiles in your household.

To work you will need:

• Plastic bottles (one toy takes two bottles);
• Scissors;
• Acrylic paints - white, black, red and others;
• Brushes;
• Small colored scraps for a scarf;
• Buboes or bows for hats;
• Glue.

Progress:

1. We take the bottle and cut off the top part almost completely or half to get the body of a penguin. The head is made from another bottle and also from the lower part, but the workpiece should be slightly smaller.
2. We connect both blanks by inserting the upper part, which is smaller, into the lower part, which is larger.
3. After you have built the penguin's body, start painting it. Take acrylic paints and apply carefully to plastic product, imitating the color of a penguin, as shown in the photo. Use more bright colors, because the brighter your New Year's penguin turns out, the warmer and more cheerful the smiles of your family will be.
4. When your penguin takes on a realistic look, you can tie a small scarf around its neck and attach a bubo or bow to its cap using glue.

What a cartoonish miracle you have created!

Video tutorial on making penguins from plastic bottles

Golden bells

Golden bells will look original on the New Year tree. This work is done very quickly and is suitable for kindergarten.

To do this you will need:

• Plastic bottles;
• Acrylic paint, if desired instead acrylic paint you can use fabrics, ribbons and accessories.

Progress:

1. For work, you should take 0.5 liter bottles, but more is possible if the tree is very large. The bottom of the bottle should be cut off. To make bell petals, you need to cut the edge of the bottle in a zigzag shape. Because the resulting edges will be sharp, care must be taken.
2. The petals of our craft need to be made pointed, and you can use a knife to give them shape. To make holes for the rope, you need to heat the knitting needle and make holes. You can do this work with scissors, but be very careful. At the end of the work, the bells should be painted, and they will dry within an hour. To give the products a New Year's look, they need to be decorated with tinsel, garlands or sparkles. The instructions are simple, and you can do the work in your own sequence.

Candlesticks made from plastic bottles

To do this you will need:

• Plastic bottles;
• Scissors;
• Glue gun;
• Universal glue.

Progress:

1. You can make a wonderful candlestick for the holiday with your own hands. You can use bottles different colors. The containers need to be cut in half. The edges of the part that remains with the bottom should be cut into strips, not reaching 4 cm. The strips can be of different widths. The resulting container will be a candle stand.
2. Strips of plastic should be melted over a candle. Then use a glue gun to attach the candle to the foil. The space around the candle can be decorated with beads or stones. This way the candlestick will have little weight, and our craft is ready.

Video master class on making candlesticks

Cone

You can make original cones with your own hands; this craft from a plastic bottle will perfectly decorate your Christmas tree and home for the New Year 2019.

To do this you will need:

• Plastic bottles;
• Scissors;

Progress:

1. You need to create squares from a plastic bottle, after which their corners should be rounded. The result will be products like chamomile. After this, you need to treat the edges of the petals with a candle so that they fall down.
2. All parts must be strung on a thread in descending order. A bead must be inserted between them. Then you need to make a spruce branch and secure it to the pine cone. The product is ready to create a festive atmosphere.

At the bottom there should be the largest bottles (2 and 1.5 liters, in the middle - liter bottles, and at the top 0.5 and 0.3 liter bottles. If you have bottles of the same volume, then adjust the length of the “branches” yourself by cutting stripes up required length.

Make a hole in the left bottom, which you secure to the lower end of the stick using a plastic bottle cap (you can hammer a nail in for strength).

Place the last, smallest piece, neck up, on the upper end of the stick and screw the green plug onto the neck, also securing it with a nail for strength.

A little patience, perseverance, effort and the forest beauty is ready!

Such Christmas trees can be used as New Year's decoration your houses!

Method 2. To make such a Christmas tree you need a minimum of time and expense. A master class on making a Christmas tree from plastic bottles will tell you in detail how to make such an original New Year's craft.

To make a decorative New Year's craft: a Christmas tree from plastic bottles, you will need the following:

1. Plastic bottles - 3 pcs;
2. Scotch;
3. Sheet thick paper, ideally whatman paper (A4);
4. Scissors;

Method 3. And finally last option for today - a Christmas tree made from plastic milk bottles (what decorative New Year trees are not made from...). The design is completely collapsible, has maximum resemblance to the original, does not require special complex technologies and specific work skills, there are no problems with bottles either, and a holiday is just around the corner...

Materials and tools

The material for making the Christmas tree is a milk plastic bottle or part of it (Fig. 1). To make a homemade tabletop Christmas tree, you will need 5-20 milk/kefir plastic bottles with corrugation at the bottom. The number of bottles determines the number of branches and tiers. The more branches, the more fluffy the Christmas tree is; the more tiers, the taller it is.

In addition to bottles, you only need scissors and plastic rivet technology

Plastic rivets

To implement the technology of plastic rivets, it is necessary to have a means for melting (installing) the rivets and the rivet itself. You need to manage to melt the head of the rivet using a hot nail or lighter. You can do this in the same way with a well-heated soldering iron. In addition, you will need clamps and tweezers to install rivets in hard-to-reach places.

For plastic rivets, it is very important to choose the material. After fumbling for about a year, through trial and error, taking into account the requirements of strength and availability, I identified several sources for obtaining plastic rivets:

1. Empty ballpoint pen refills. Enough available material. They are good because they are colorless and the compound, with their help, turns out to be organically integrated into the product made from plastic bottles. Such a rivet turns out neat, with a round head, however, it has a slightly reduced tensile strength. In addition, the rod from ballpoint pens is round in cross-section and completely fills the drilled hole in the parts being connected. By the way, the walls of the rods are different thicknesses, for rivets it is better to use rods with thicker walls.

2. Chupa Chups sticks. Similar to option No. 1 only in color. The connection is more cumbersome, and the rivet head melts with difficulty (it either burns, becomes ugly, or unreliable).

3. The most perfect option, and very convenient (I give the world a suggestion) to use material from buckets with construction mixtures for 3, 5, 10 liters There are quite a lot of them left after repairs, and even one lasts for a long time.

From the walls of such a bucket you need to cut a ring, and cut the ring along the generatrix (this is the only way) into strips 2...4 mm wide, length from 4 to 15 cm. These will be the blanks for rivets, and, moreover, the best and most affordable, in almost unlimited quantities quantity.

Obtaining a connection using such rivets is simple. It is more convenient for this to prepare rivets of the required length in advance, melting the head of the plastic rod on one side. To connect two parts with plastic rivets, we overlap the parts and melt them with the same burner, forming a hole the desired profile and sizes, insert a rivet there and, by melting, form a head from the opposite end of the rivet rod. After practicing reflowing several times, the head turns out neat and tear-resistant.

Let's get started...

To implement the idea it is necessary raw material in the form of a part of a milk plastic bottle (Fig. 1a) which is cut along the circumference into two components (Fig. 2 and Fig. 3, respectively). A trunk will be formed from the part adjacent to the neck (Fig. 1b), and branches of the future New Year tree will be cut out from the ring with a central groove (Fig. 1c). One whole plastic bottle produces two or three rings. The more rings you prepare, the fluffier and taller the Christmas tree you can assemble. I had at least 20 of these rings (10 full bottles).

Plastic rings with a groove in the middle need to be cut into several equal parts(Fig. 2) along the generatrices of the bottle cylinder. As a result, we get convex rectangles. If you cut into 2 parts, then from such long halves you will get long lower branches of the Christmas tree, if you cut into 3 equal parts, you will get branches of medium tiers and medium length, and cutting into 4-5 parts, you get small blanks for the upper tiers of a tabletop Christmas tree . It is not at all necessary to observe particular uniformity in the dimensions of the rectangles for one type of tiers.

Next begins the rather tedious work of forming the branch. From each plastic convex rectangle (Fig. 3a), a wedge-shaped blank should be cut out with scissors (Fig. 3b). The axis of symmetry of the wedge-shaped part should be located along the corrugation groove. Immediately after cutting the workpiece, “needles” should be formed on it, making cuts along the side edges at approximately 45 degrees to the groove and radially at the end of the “branch”. (Fig. 3c). The needles are alternately moved out from the plane of the workpiece, also at 45 degrees to each other. Placing the needles up and down relative to the plane of the branch provides fluffiness to the Christmas tree.

As a result of such painstaking work, several sets (Fig. 4) of branches of different sizes are obtained for the tabletop homemade Christmas tree. Cutting branches and then needles is quite a long task, but you can entrust this to your family as part of a collective creativity to decorate life under New Year. It should be noted that it is difficult to accurately determine the number of branches forming a specific tier by eye, so you should always have several rings in stock (Fig. 1c) for cutting branches during the installation of tiers

The place for attaching branches is the trunk, which consists of several parts (logs). The top parts of plastic bottles (Fig. 1b) were considered waste during the separation of the rings (Fig. 1c), but now they are also used in tree making to create a trunk. The base of the trunk and the lower log is the full neck part of a plastic bottle (Fig. 5a). The upper logs are assembled from blanks obtained by cutting off the threaded part of a milk bottle with a flange, as well as removing a segment of plastic along the generatrices (Fig. 5b, 5c). The segments need to be rolled into a tube and secured on both sides with plastic rivets. In a similar way, it is necessary to create several logs to attach tiers of branches. In my case, these are 3 logs, but there could be more or less. For a miniature Christmas tree, 3-4 tiers of branches on just one log are enough.

Naturally, the diameter of the trunk should taper towards the top of the tabletop tree and the diameter of the upper log should be smaller than the lower one. The larger the cut of the segment, the higher the log obtained from the conical top of the plastic bottle. For the top you need a half segment, and for the middle part about two-thirds of the whole neck (Fig. 5b). The diameter of the lower hole of the upper log should be approximately 1 mm larger than the upper hole of the lower log forming the trunk.

It's time to attach the branches to the "logs". Each log will need to place 2-3 tiers of branches. The small number of tiers does not allow effectively covering the rivet heads with branches, and a large number of spoils the aesthetic appearance of the Christmas tree. In each tier of this design you can install from 4 to 10 branches. Fastening is carried out using plastic rivets, since you will need quite a lot of plastic rivets, it is better to prepare them for future use. The easiest way is to place the branches in tiers on the lower logs (Fig. 6), since the neck of the plastic bottle is wide enough and it is convenient to hold the plastic rivet with inside finger.

If you place the branches closely along the circumference of the tier, then one rivet is enough to attach the branch to the trunk (Fig. 6-8). For those who like greater reliability, they can install two rivets side by side. The tiers of branches must be formed like the roof deck of a house - from the bottom up, then the branches of the upper tier will cover the rivets of the lower one and the heads of the rivets will be completely invisible.

In my case, in the lower (Fig. 6) and middle (Fig. 7) log of the trunk there are 2 tiers of branches, and in the upper one - 3 (Fig. 8). There are 5 tiers of branches in total. It’s quite enough to look amazingly similar to a real tree. Installation of plastic rivets on upper tier, due to its small diameter, should be done using tweezers or a medical clamp.

After securing all tiers to all logs, you can begin final assembly. But first it is advisable to decide on the top. In my case, without thinking for a long time, I built the top using the same technology as the trunk (Fig. 5), that is, by rolling the plastic into a cone. But you can do this in another way, for example, in the form of an asterisk or a ball (I like the cone better). The top of the tree is attached to the upper element of the trunk also using a rivet, installed from the inside and melted from the outside. Top part trunk, together with the top there is already a miniature table Christmas tree(Fig.9). You can install it on your monitor and enhance the holiday feeling...

A living Christmas tree grows from the bottom up, in the same order, and we collect logs with tiers of branches by adding “logs” (Fig. 10) to the already existing Christmas tree. It is better to connect the trunk elements together in a place covered by a branch, at three points along the circumference of the trunk. In this case, the trunk becomes rigid and will not break if the Christmas tree accidentally falls to the floor from the table, the Christmas tree is a tabletop one...

And if you insert a dynamic light part (for example, a garland) inside the Christmas tree, then New Year's Eve she will amaze those around her with her charm:

Here is such a master class. Of course, it’s a little complicated, but what a beauty it turns out!