home · Appliances · Homemade Christmas tree from plastic bottles. Creative Christmas trees made from plastic bottles. Paper Christmas tree toy for the Christmas tree - Master class with explanations in the photo

Homemade Christmas tree from plastic bottles. Creative Christmas trees made from plastic bottles. Paper Christmas tree toy for the Christmas tree - Master class with explanations in the photo

Creative Christmas trees are good because they are unusual; they can be created from the most different materials, and edible trees will become a decoration and the main highlight of the New Year's table.

How to make a Christmas tree from plastic bottles?


To make such a fluffy beauty, take:
  • green plastic bottles;
  • scissors;
  • scotch;
  • a wooden stick, the diameter of which is slightly smaller than the hole in the neck of the bottle.
Prepare containers by removing labels and washing them. For each bottle you need to cut off the neck and bottom, cut the rest into several rectangles, chop them into strips, but not completely.


Trim the shoulders of the bottle, leaving only the neck. You will put a wooden stick into it. Starting from the bottom, attach the blanks from the bottle here so that the fringe points up.


We decorate the entire trunk, and attach a small part on top, which will become the top.

The blanks must be fastened in such a way that the largest ones are at the bottom and the smallest at the top.


Here's what else a Christmas tree can be from plastic bottles. Making one with your own hands is also quite simple.


To reproduce this masterpiece, take:
  • green plastic bottles;
  • scissors;
  • a wooden stick of a suitable size.
Remove the labels from the bottles and proceed with the blanks as follows: cut off the bottom, cut the remaining part into 10 identical strips, almost reaching the shoulders of the bottle.


Now you need to make diagonal cuts on sides 1 and 2 of each tape. Fold the resulting fragments over one another.


Take the bottom big bottle, make a hole in it, put the neck of a bottle into it, into which a wooden stick is inserted. Secure this part of the structure with a cork by screwing it onto the neck.

Place pre-made parts on the stick, starting with the largest bottle and ending with the smallest one.


If you threaded all the parts onto the barrel with the neck down, then place the last one with the neck up. Secure the tree by placing a lid on the top of the tree.


The result was a wonderful tall tree made from plastic bottles. From this container you can make an even larger tree by placing the bottles, for example, on a mop.


If you want to make a cone-shaped tree, then roll a piece of paper or cardboard in this way. Cut off the neck of the bottle and insert a paper blank here. Cut trapezoidal fragments from other parts of the container. Chop the longest edges of each piece into equal strips, not reaching the top 2 cm.

Secure these elements with tape, arranging them in ascending order, starting with large and ending with small.


This is what should happen in the end.

If, for example, you work in grocery store, then you can put here a large Christmas tree made of plastic bottles, which will certainly attract buyers. To do this, you need to arrange the bottles in a circle in rows, and place plywood circles on them. Each subsequent tier is smaller than the diameter of the previous one. There should be 3 bottles left closer to the top; place a star on top.


Even empty plastic bottles will become an excellent decorative element. You can backlight it so that the trees sparkle attractively at dusk.


Other waste materials will also become a picturesque Christmas tree.

Making a Christmas tree out of paper with your own hands - master class

Once magazines are read, they are usually thrown away. But you can do it differently, make a paper tree. To create it, you can use newspapers and old books.


Here is a list of what is needed:
  • a sheet of cardboard or whatman paper;
  • colorful magazine;
  • shaped hole punch;
  • glue gun or PVA;
  • pencil.
First you need to roll the cardboard into a cone and glue it to secure it in this position. Prepare decorative elements. To do this, cut them out from a magazine or book using zigzag scissors or a hole punch.


These parts need to be given a rounded shape. To do this, screw each one onto a pencil. Now you can glue them to the base, starting from the bottom.


Apply pieces as much as possible closer friend to each other so that the cardboard is not visible between them. Glue in rows, placing the elements on top of each other. Wrap one of them around the top of your head. The paper Christmas tree is ready.

If you like clean lines, then check out the next option.


This tree would be appropriate in an office. On the one hand, it has a strict shape, and on the other, it looks festive. Here's what you need for this craft:
  • whatman;
  • double tape;
  • wrapping;
  • regular tape;
  • decorations;
  • scissors.
Instead of whatman paper, you can use thin cardboard. If you don't have a large enough piece, then you can create one from small ones using tape.


Roll this base into a ball and secure with tape.


The excess needs to be cut off.


Twist the cone wrapping paper. To do this, place it on work surface, place a cardboard blank on top, secure it with tape at the top of the head.


Wrap the cone completely, then secure the edges of the paper with double tape and trim off the excess.


The lower part of the tree must also be made flat by removing the paper here with scissors. Decorate the Christmas tree with a star, ribbons, you can decorate it with candies or beads.


Here's what else a paper Christmas tree can be like.


Take:
  • skewer;
  • designer paper or colored cardboard;
  • thick cardboard;
  • glue or glue gun.
Draw a square on thick cardboard, cut it out and glue it to a skewer. Cut out circles of the same size first. Make holes in them and place them on a skewer pre-lubricated with glue. Then make several slightly smaller circles. The tree trunk itself is also decorated. Gradually cut out smaller and smaller circles and put them on the trunk.


Here's what kind of paper Christmas tree you can make using polystyrene foam.


For creativity you will need:
  • foam or cardboard;
  • green corrugated paper;
  • scissors;
  • adhesive tape;
  • masking tape;
  • marker;
  • PVA glue;
  • hook;
  • stationery knife.
Draw an acute angle on the foam or cardboard. If this is difficult to do, then follow the photo tips. First draw a vertical line, then two horizontal ones, after which you will have an even angle. If you want to make a large Christmas tree, then simply glue several fragments together with tape.

Cut the strip corrugated paper, chop it with scissors in the form of a fringe, slightly short of reaching the opposite edge. Start gluing these decorated ribbons from the bottom.


When the entire creative tree is decorated in this way, decorate it as you wish. Glue a rectangle of cardboard from the bottom, having previously painted it in Brown color. But you can do without this part of the trunk. To attach the tree to the wall, use a hook or double tape.


This is what a wonderful Christmas tree came out of paper. Textile models are very interesting; for them you can use leftover material.

Christmas tree made of fabric and threads


To make such a stylish beauty, take:
  • felt;
  • cardboard;
  • scissors;
  • double tape or glue.

It is better to take material in two shades, then the creative Christmas tree will look more contrasting.


Roll the cardboard into a cone. You can spin it bottom part a small amount of tinsel. Cut felt circles and use scissors to make intersecting sections in the middle. They are needed in order to put the felt blanks on the base, which is what you will do. These X-shaped cuts will also help the circles become wavy.


First put on the larger blanks, then the medium ones, the smallest ones will be on top. When you fill the entire cone, all you have to do is decorate your creation and admire what a beautiful fabric Christmas tree you have made.

You can also make a very cute tree from threads.


To make this, take:
  • a cone made of foam plastic or cardboard;
  • fleecy yarn;
  • pins;
  • decorations;
  • thick yarn.
If you don't have a foam cone, then roll one out of cardboard. To make the work progress faster, make turns with two threads at once. Attach them to the base with pins.


When you have formed the entire cone, do not cut these two threads, but now wrap them around the base, moving down.


Cut the thread and secure the remaining end with a pin. Decorate the Christmas tree with beads or buttons, and also attach them with a pin or sewing.


The next creative DIY Christmas tree is made from wire and thread. Help yourself with pliers or round nose pliers, bend a piece of wire so that it looks like a star. Attach a thinner wire to it, which must first be rolled into a cone. Wrap it with threads. You can simply make such a star out of wire and attach it to the top of the blue Christmas tree you just created.


Your New Year's table will look amazing if you decorate it with edible Christmas trees. Look how wonderful this strawberry tree looks.


You can make a chocolate base and attach the berries to it with the point outward using a toothpick.


Here are some other original trees you can create from products.


Check out the related workshops.

Edible Christmas tree: step-by-step preparation


To make one, take:
  • wooden skewer;
  • apple;
  • cucumbers;
  • red and yellow sweet peppers;
  • plate.
You can use wooden skewers or one half of a chopstick.

Place the apple half cut side down on a platter or plate. Stick a skewer into it. Chop the cucumber into not too thin slices.

Place these slices on a skewer, starting with the largest one. Arrange them in a checkerboard pattern or approximately so that they look like Christmas tree branches.

Cut small pieces from red and yellow peppers. Place them on some cucumbers or secure them with toothpicks. Thread an elongated piece of pepper onto the top of the head, closing the skewer on top.

You can decorate a New Year's dish with this tree, for example, a salad. Place a little parsley along the edge of the plate, which will symbolize green grass.

The next tree consists of fruits, berries and vegetables. Take:

  • large carrots;
  • apple;
  • kiwi;
  • strawberries;
  • toothpicks;
  • grape;
  • greenery;
  • hole for removing the core from apples.


Wash the apple. Special device take it out from the middle on one side. On the other side, make an even cut so that the apple stands firmly on the plate.

Place the carrot in the hole. Stick toothpicks into it. Thread kiwi halves, strawberries and grapes onto them. The star can be cut from a suitable fruit or vegetable, or from a thick piece of cheese. Decorate a plate with greenery to make the tree look even more picturesque.

The next tree is made from apples. To prevent them from darkening, the cut slices should be dipped in a solution of lemon juice for 15 minutes.

First you need to cut out the middle of the apples, then chop these fruits into circles. Using a knife or a special notch, give these blanks a star shape. Place it on a plate and place a slightly smaller piece on top. Adhering to this tactic, lay the Christmas tree to the end. Decorate it with cranberries and physalis.


If you do New Year's salad, lay it out in a cone-shaped mound, compact it. Cut the leek leaves to resemble sharp corners. Stick the resulting decorations into the salad so that the leaves turn into twigs. Decorate the Christmas tree with finely chopped carrots.

If you don't have leeks, then you can garnish the salad with dill. Look at the photos to see how to arrange the branches, starting from the bottom.


A creative Christmas tree can be made from many other products.


Cut the cheese into sharp triangles, thread them onto a pre-attached skewer, and garnish with a slice of red pepper. Decorate the plate with tomato and kiwi slices.

If you have green pepper, turn its slices into lush spruce branches and make a New Year's tree from this edible material. Circles and slices of lemon or grapefruit will also become a picturesque decoration for the New Year's table.

If you use kiwi for this, use unripe ones so that the circles stick tightly to the base.


Meat lovers will also not be left at a loss. After all, an edible Christmas tree can be created from salami slices.


Place them on a skewer attached to half an apple and drape the top. Decorate the plate with greenery, and the masterpiece can be placed on the New Year's table.

Vegetarians and connoisseurs proper nutrition They will be able to make a Christmas tree out of broccoli, decorate it with cherry tomatoes, and make a star out of sweet peppers. The asparagus stalks will turn into a tree trunk, and cauliflower- into white snowdrifts.


The basis of the next Christmas tree is a salad, but it is better to take one whose ingredients can be held together well. A dish that contains boiled rice is perfect. Decorating the base green leaves salad, then you need to decorate this edible Christmas tree with peeled shrimp and cherry tomatoes.


If you like Asian cuisine, make the rolls with added greens so that the base has that shade. If they come with caviar, then this ingredient will also act as a decoration. Fold the rolls as shown in the photo to create a comfortable Christmas tree.


Those with a sweet tooth can decorate the base made of polystyrene or foam rubber with candies, attaching them with toothpicks. And if your family likes to eat well, then use small sausages, slices of sausage, tomatoes and lettuce on the base. You can also add other edible ingredients here, thereby delighting those who love a hearty meal.


Gourmets will surely love the horizontal Christmas tree made from tomatoes and different varieties cheese - a great opportunity and reason to try them.


If you like a candy tree, attach them to a plastic bottle with tape. And if you don’t know what to give an adult as a New Year’s gift, then use a bottle of champagne as a base, decorating it in this way. Give this present.


If you like to bake, make gingerbread or shortbread dough, roll it out, cut out the stars using special notches or just a knife. All that remains is to decorate the baked sweets with white icing and place them on top of each other.


On New Year's table even pizza will create the right mood. To do this, when rolling out the dough, cut out a Christmas tree from it, decorate with cherry tomatoes, olives and slices of smoked sausage or chicken pieces. Sprinkle your masterpiece with a little cheese and bake in the oven.


If you have round pizza, then cut it into triangles, insert an edible straw on the rounded side, you will get cheerful portioned Christmas trees.


Like these ones creative Christmas trees you can create it yourself. There are other ideas, we suggest you familiarize yourself with them and cheer yourself up.


Get inspiration for creating an edible Christmas tree from the following video.

Making a Christmas tree from a plastic bottle. Step-by-step instructions with photos.

Master class on the topic “Christmas tree - green needle”


Lyubicheva Elena Konstantinovna, teacher speech therapy group, MBDOU apartment No. 6, Usolye-Sibirskoye, Irkutsk region.

Christmas tree made from a plastic bottle, made with your own hands - a manifestation of creativity on the eve of New Year's holiday. A master class on making a Christmas tree from used plastic bottles will demonstrate every step of this unusual New Year's craft and you will be able to make a festive Christmas tree with your own hands. This Christmas tree can be put up at home or given to friends. The master class is designed for older children school age, teachers and parents.

Dressed up the Christmas tree in a festive dress:
In colorful garlands, in bright lights,
And the Christmas tree stands, sparkling, in a lush hall,
Remembering with sadness the old days.
The tree dreams of an evening, monthly and starry,
Snowy meadow, sad cry of wolves
And the neighboring pine trees, in a frosty mantle,
Everything is covered in diamond sparkles and snow fluff.
And the neighbors stand in gloomy sadness,
They dream and drop white snow from the branches...
They dream of a Christmas tree in a lit hall,
Laughter and stories of joyful children. Konstantin Fofanov

Purpose of the master class: making a New Year's gift from waste material at no extra cost.
Tasks: teach manufacturing technology Christmas tree from scrap materials,
contribute to the development of artistic taste, fine motor skills of the hands, precision in performing actions, observational imagination, eye
promote environmental education of children, cultivate the quality of accuracy and composure when performing practical work, hard work, communication skills, accuracy, work culture, respect for nature

Materials: plastic bottle, A4 landscape sheet, tape, scissors.


Progress:
The neck and bottom of the bottle need to be cut off, i.e. cut out the middle and cut it into pieces.

Then carefully cut each part with fringe - make blanks for the branches.



The bottle neck will serve as a stand for the barrel. Roll up a piece of paper and insert it into the neck.


Then we glue the first row of fringe with tape.


Then we attach the remaining rows in the same way. And we stick one part of the fringe into the top.


We decorate our Christmas tree with stars, snowflakes and bows made with a hole punch.


So our green beauty is ready!



Now let's hang beads or, if desired, garlands!


Thank you for your attention!!!

Brisk trade will open on city streets in December Christmas trees. It would seem that we should rejoice at such an abundance of New Year's markets, but often we feel sincerely sorry for the green beauties cut down at a time when they were just beginning to grow. Fortunately, many people are now purchasing artificial plastic trees or even making them at home from the most unusual means at hand - lemonade bottles, balloons, tinsel, pine cones and even books! Today we will share with you new information on what and how to make a Christmas tree with your own hands for the New Year 2018, how to decorate it, what crafts you can bring to school and kindergarten for the competition. From our master classes with step by step instructions and photos you will learn how to make a green miracle from paper and cardboard with your own hands, cotton pads, threads and ribbons.

How to make a Christmas tree from ribbons with your own hands for school step by step: a master class at home for the New Year 2018

There are probably no materials left from which craftsmen have not tried to make New Year trees. Everything is used - from cones and paper sheets to soft toys and beads. But perhaps you haven’t heard yet how to make a DIY ribbon Christmas tree for school at home. Then this video and master class is for you!

Video master class on making a Christmas tree from ribbons

After watching the video below, it will become clear to you how to make a small Christmas tree with your own hands in normal home conditions for school from satin ribbons. This elegant mini-tree will need to be decorated with artificial pearl beads or large beads. However, this video master class will be useful only to those who know how to deal with small details and are accustomed to making small crafts.

How to make your own Christmas tree from paper or cardboard at home for the kindergarten for the New Year 2018

Before the New Year, teachers often give preschoolers simple tasks - they invite the children to make something for the upcoming holidays: a gift box, a snowman made of cotton wool, New Year's toys. Perhaps, after reading our recommendations and watching photos and videos of master classes, parents will be able to explain to their daughters and sons how to make a Christmas tree for kindergarten with their own hands from paper or cardboard at home.

Master class on making a Christmas tree from paper with step-by-step photos

You've probably seen how diligently kids make different paper crafts for the holidays. How enthusiastically the eyes of the children shine when they realize that everything is working out just fine for them! This simple master class with step by step photos will explain to you how you can make a Christmas tree for kindergarten at home - you do the craft yourself from paper or cardboard. In addition, you will need:

  • Pencil;
  • Scissors;
  • Tinsel;
  • Fluffy wire;
  • Glue;
  • Sequins;
  • Rubber;
  • A stand with filler or a large decorative candle.

How to make a Christmas tree with your own hands at home for school for the New Year's craft competition 2018

Before the New Year, schools often ask children to bring homemade New Year-themed toys to class. At the same time, the most popular product is always the Christmas tree. If you want to know how to do the best Christmas tree with your own hands at home and win a crafts competition at school, read our instructions, remember the recommendations of the master classes, watch the video with explanations.

Crafts New Year tree for a school competition - Master class with photos step by step

The most talented children always participate in school competitions. Fighting for a prize place, they think through the most unexpected in advance, original products and looking for them suitable materials. After reading how to make a Christmas tree with your own hands at home for a school crafts competition, the children will be able to make unusual New Year trees. They can decorate both the classroom and the shelf with souvenirs. Carefully read all the instructions in the master class and get to work.


The Christmas tree can be made in another way. Just stick bright paper ribbons onto the cone until you get such a miracle.

How to make a Christmas tree from cotton pads at home with your own hands: master class with photos

Did you still think that cotton wool pads sold in supermarkets and pharmacies are only sold by ladies who use them to remove makeup? No, they are also purchased by folk craftsmen and amateurs unusual crafts. If you want to make a fluffy New Year's beauty covered with snow, read how to make a Christmas tree from cotton pads at home with your own hands: a master class with photos will explain all your steps to you. The size of the product will depend on the size of the Whatman paper for the craft.

Christmas tree made from cotton pads step by step - Master class with photos of children's crafts

Having learned how to make a beautiful Christmas tree from ordinary cotton pads at home with your own hands, by turning to our master class with photos and explanations, you can surprise all your friends and family. It’s rare to see an artificial spruce of such beauty! Try to do it yourself.

Before starting work, prepare:

  • Whatman sheet;
  • Glue stick;
  • Stapler;
  • Lots of cotton pads;
  • Scissors;
  • Band-Aid;
  • Decorations for finished crafts.

How to make a Christmas tree with your own hands from threads at home for the New Year 2018: video master class with explanations

Among all the Christmas trees, made from the most unusual materials Probably the lightest tree in terms of weight is considered to be a thread tree. Well, what about ak at home, make a simple, but durable and beautiful Christmas tree with your own hands from threads, a video master class with explanations from the author of such an unusual craft will explain.

DIY Christmas tree made of threads: master class on video at home

In order to surprise your friends who come to visit you for the New Year, watch how to make a Christmas tree with your own hands from threads at home: a video master class with explanations will give you all the necessary tips. This craft is quite inexpensive, and it always looks amazingly airy!

How to make a Christmas tree with your own hands from tinsel to celebrate the New Year 2018: step-by-step instructions with photos for kindergarten and school

We often feel sorry for cut down Christmas trees, so many are looking for an alternative to a real New Year tree. It could be an artificial homemade spruce made from shiny decor. Having learned how to make a Christmas tree with your own hands from tinsel for 2018, you will give up the idea of ​​going to the Christmas tree market.

Christmas tree 2018 made of tinsel - Master class with photos and instructions

Having prepared inexpensive, accessible materials and tools, and remembering how to make a chic Christmas tree with your own hands from shiny tinsel for the New Year 2018, you can get to work. Just in case, let the page with the master class and instructions for making the craft open on it.


How to make a Christmas tree with your own hands step by step from available materials and books: a master class for children for the New Year 2018

How can you imagine modern Christmas tree schematically? Essentially, it is a triangular, colorful structure, decorated with shiny decorations, beads and garlands. Some craftsmen manage to make spruces even from glossy magazines! We will tell you how to make a Christmas tree with your own hands from available materials and books.

Christmas tree from books - Master class with step-by-step photos

After getting acquainted with a master class explaining how to make the most unusual Christmas tree with your own hands from various improvised means and books available in your home library, you will understand that such an activity will bring you true pleasure. Well, when was the last time you held thick volumes of novels in your hands? Now you will do it with pleasure!


What to make a Christmas tree from with your own hands: master class on crafts from pine cones

The most “alive” Christmas trees are those made from natural materials. If you really want to know what you can use to make a realistic Christmas tree with your own hands, a master class with explanations on how to create crafts from pine cones will help you prepare for the New Year 2018.

Christmas tree for the New Year 2018 from pine cones - Master class with instructions

If you are looking for something to make a Christmas tree with your own hands, the pine cone crafts master class, or rather, each of its instructions, will answer all your questions. In addition to dense, but fully opened buds, you will need the following:

  • Thermal gun;
  • Hot glue;
  • Scissors;
  • Cardboard;
  • Flowerpot;
  • Tinsel and toys;
  • A can of white or silver (gold) paint.

Let us immediately make a reservation that you can choose any size of spruce. Of course, it will take more than a dozen pine cones to make a large tree.

What can you use to make a Christmas tree for crafts for the New Year 2018 and how to decorate it

Having decided that under no circumstances will you buy a felled tree at the Christmas tree market, thinking about what you can use to make a Christmas tree for crafts for the New Year 2018 and how to decorate it, refer to the master classes presented on this page. One of them tells how to make cotton tree. When following step by step instructions home craftsmen always end up with a fluffy white beauty!

White fluffy Christmas tree made of cotton wool - Master class with photos

If, after much thought about what you can use to make an original Christmas tree for crafts for the New Year 2018 and how to decorate it in an unusual and bright way, you have decided that the most cheap option- for you, read our master class and look carefully at its photo. Create a beautiful Christmas tree using ordinary cotton wool!

How to make a Christmas tree with your own hands from plastic bottles and how to decorate it

Sometimes we, throwing away seemingly completely unnecessary things, do not realize that you are sending a valuable one to the trash heap. construction material for the most unusual crafts. Having learned how to make a Christmas tree with your own hands from plastic bottles and how to decorate it, you will most likely reconsider your attitude towards some “garbage”.

Green Christmas tree made from plastic bottles: master class with explanations

Probably, after drinking lemonade or Sprite, you throw the used bottle into the trash without regret? In vain. If you are looking for what to give a friend for the New Year, our master class with explanations on how to make an original green Christmas tree with your own hands from plastic bottles and how to beautifully decorate it will help you in choosing a gift for the holiday.

For work, prepare:

  • Green plastic bottle;
  • Scissors;
  • Cork plug;
  • A candle;
  • Glue;
  • Foam rubber;
  • A small plastic cup for yogurt or mousse.


Now, having familiarized yourself with several wonderful master classes explaining how to make a Christmas tree with your own hands from various available materials, including plastic bottles, ribbons, pine cones, tinsel, books, threads, cotton pads and paper, you and your child will be able to make excellent crafts on New Year 2018 in kindergarten or school. Perhaps your product will take first place in the competition, and all competitors will begin to puzzle over what you made such beauty from.

Today we bring to your attention the process of making a large holiday tree from simple green plastic bottles. This Christmas tree is collapsible, so it can have any number of tiers (you only need a longer “stem”). You can add more layers each year and within a few years you will get a big fluffy beauty around which your children will dance in circles.

To make a Christmas tree from plastic bottles you need:

Green plastic bottles (it took 1.3 liter bottles about 30 pieces);

Steel part (“rod”) of the desired length (here about 0.5 m, with an approximate diameter of 0.5 cm);

Single-core aluminum wire insulated (section 2.5mm2);

Christmas tree stands;

Scissors, heat gun;

Christmas tree made from plastic bottles step by step:

Take the bottle and cut off the middle part from it, as in photo 2-3. Then cut this part of the bottle in a spiral using scissors, cut a strip with an approximate width of about 2 centimeters (photo 4).

Next, you need to bend one edge approximately 0.5 cm along the entire length of the strip, as in photo 5-6. This side will help set the direction for spruce needles (needles), and will also serve as a limiter for cutting the “needles”. Cut a fringe strip about 0.1 cm wide (photo 7-8).

Then start creating spruce branches. Let's make a “top” for the Christmas tree, for which wrap a strip of plastic (about 8 cm long) around the “rod” and glue it using a hot-melt gun (apply glue to the “rod”, otherwise the workpiece will high temperature may become deformed) (photo 9). Next, twist a small piece of fringe and glue the pieces inside (photo 10). Then wrap the “rod” in a spiral with a strip of fringe (photo 11). When one strip ends, take another and continue gluing (photo 12-13).

After making the top, make the first tier of branches, which will consist of three short parts (a branch with an approximate length of about 7-8 cm). Make a wire frame, as shown in photo 14, connect it to a plastic ring (photo 15-16).

Start wrapping the “branches” in the same way as the top (photo 17). After creating all the branches, braid the “needles” and the main stem (photo 18-19). As a result, you should get two parts, as in photo 20.

Make the third detail of the future Christmas tree, a remote one. At first it was made too high, so it was moved to the bottom of the tree and the piece was made smaller. In total, four distances were used for this tree: Upper - approximately 0.5 cm; the second - about 0.6 cm; third - 7 cm; the lower one is 8 cm. Make “distances” by analogy with making the crown, just do not close the upper hole (photo 21). The Christmas tree will look at this stage as in photo 22.

Next, make a second tier of branches, which will be wider than the first and will already include four branches (with an approximate length of about 9 cm), each of which will have two side branches. The length of the main branches turned out to be approximately 9 cm (photo 23 -24).

Wrap the frame, starting with the smallest branches, then the main ones, and ending with the trunk (photo 25-26). Under the influence of hot glue, the plastic heats up and takes on a fairly plastic shape, making it very easy to set the direction of the needles for each branch at the junction of the branches (photos 27-29).

The central part of the stem before camouflage with pine needles looks like in photo 30, and after camouflage it looks like in photo 31. Next you need to make a second spacer part (photo 32).

Next comes the production of the third tier, with an approximate length of branches of about 10 cm (20 cm in diameter) (photo 33). Finally, make the lower tier (branches 15 cm long (30 cm in diameter)) and the lower distance (photo 34).

All that remains is to install everything on the stand! If desired, you can make any number of tiers, and each subsequent tier should be proportionally wider than the previous one - this way you can get a tall and elegant Christmas tree.

The Christmas tree made from plastic bottles is ready!

According to the site: girlsschool.ru

At the bottom there should be the largest bottles (2 and 1.5 liters, in the middle - liter bottles, and at the top 0.5 and 0.3 liter bottles. If you have bottles of the same volume, then adjust the length of the “branches” yourself by cutting stripes up required length.

Make a hole in the left bottom, which you secure to the lower end of the stick using a plastic bottle cap (you can hammer a nail in for strength).

Place the last, smallest piece, neck up, on the upper end of the stick and screw the green plug onto the neck, also securing it with a nail for strength.

A little patience, perseverance, effort and the forest beauty is ready!

Such Christmas trees can be used as New Year's decoration your houses!

Method 2. To make such a Christmas tree you need a minimum of time and expense. A master class on making a Christmas tree from plastic bottles will tell you in detail how to make such an original New Year's craft.

To make a decorative New Year's craft: a Christmas tree from plastic bottles, you will need the following:

  1. Plastic bottles - 3 pcs;
  2. Scotch;
  3. Sheet thick paper, ideally whatman paper (A4);
  4. Scissors;
So, cut the bottle as shown in the photo. That is, it is necessary to cut off the bottom and neck so that a straight pipe from the bottle remains.
Next you need to make blanks for the branches. In order for the tree to have a cone-shaped shape, the blanks must have different sizes. That is, you need to achieve the following:
Cut each plastic bottle lengthwise into 3 equal parts and then adjust their sizes so that each subsequent tier is slightly smaller than the previous one. Then each workpiece must be “dissolved into needles.” The neck of one of the bottles will serve as a stand for our future New Year's craft.
The next step is to roll the Whatman paper into a tube. We insert it into the bottleneck...
...and secure with tape.
Now all that remains is to secure each tier of the tree with tape in a circle and a small New Year's craft: DIY Christmas tree is ready!

The top of our New Year's tree you can decorate with homemade Christmas tree toy, or complete the Christmas tree the way we did it.
If you want to make a Christmas tree from plastic bottles more fluffy, like in the photo, when making the Christmas tree, you need to cut the needles as thinly as possible (more often).

By the way, the Christmas tree also looks quite creative with larger “branches” - master class from the website Country of Masters.

We cut the bottle in the same way as in the previous version into 3 parts. Only we make cuts in a circle towards the center, straight.
A puncture is made in the center with an awl and the needles are bent up and down in order. A puncture is made in the lid of the cream or mineral water into which a skewer of the required length is inserted.
The parts are strung in descending order, with a large bead placed on top of the glue. The Christmas tree can be decorated with polystyrene foam, rain, etc.

Glue the Christmas tree onto the disk stand.

The Christmas tree is ready!

You can put gifts or plant an animal nearby.

These Christmas trees have been a constant success for many years.

Method 3. And finally last option for today - a Christmas tree made from plastic milk bottles (what decorative New Year trees are not made from...). The design is completely collapsible, has maximum resemblance to the original, does not require special complex technologies and specific work skills, there are no problems with bottles either, and a holiday is just around the corner...

Materials and tools

The material for making the Christmas tree is a milk plastic bottle or part of it (Fig. 1). To make a homemade tabletop Christmas tree, you will need 5-20 milk/kefir plastic bottles with corrugation at the bottom. The number of bottles determines the number of branches and tiers. The more branches, the more fluffy the Christmas tree is; the more tiers, the taller it is.

In addition to bottles, you only need scissors and plastic rivet technology

Plastic rivets

To implement the technology of plastic rivets, it is necessary to have a means for melting (installing) the rivets and the rivet itself. You need to manage to melt the head of the rivet using a hot nail or lighter. You can do this in the same way with a well-heated soldering iron. In addition, you will need clamps and tweezers to install rivets in hard-to-reach places.

For plastic rivets, it is very important to choose the material. After fumbling for about a year, through trial and error, taking into account the requirements of strength and availability, I identified several sources for obtaining plastic rivets:

1. Empty ballpoint pen refills. Enough available material. They are good because they are colorless and the compound, with their help, turns out to be organically integrated into the product made from plastic bottles. Such a rivet turns out neat, with a round head, however, it has a slightly reduced tensile strength. In addition, the rod from ballpoint pens is round in cross-section and completely fills the drilled hole in the parts being connected. By the way, the walls of the rods are different thicknesses, for rivets it is better to use rods with thicker walls.

2. Chupa Chups sticks. Similar to option No. 1 only in color. The connection is more cumbersome, and the rivet head melts with difficulty (it either burns, becomes ugly, or unreliable).

3. The most perfect option, and very convenient (I give the world a suggestion) to use material from buckets with construction mixtures for 3, 5, 10 liters There are quite a lot of them left after repairs, and even one lasts for a long time.

From the walls of such a bucket you need to cut a ring, and cut the ring along the generatrix (this is the only way) into strips 2...4 mm wide, length from 4 to 15 cm. These will be the blanks for rivets, and, moreover, the best and most affordable, in almost unlimited quantities quantity.

Obtaining a connection using such rivets is simple. It is more convenient for this to prepare rivets of the required length in advance, melting the head of the plastic rod on one side. To connect two parts with plastic rivets, we overlap the parts and melt them with the same burner, forming a hole the desired profile and sizes, insert a rivet there and, by melting, form a head from the opposite end of the rivet rod. After practicing reflowing several times, the head turns out neat and tear-resistant.

Let's get started...

To implement the idea it is necessary raw material in the form of a part of a milk plastic bottle (Fig. 1a) which is cut along the circumference into two components (Fig. 2 and Fig. 3, respectively). A trunk will be formed from the part adjacent to the neck (Fig. 1b), and branches of the future New Year tree will be cut out from the ring with a central groove (Fig. 1c). One whole plastic bottle produces two or three rings. The more rings you prepare, the fluffier and taller the Christmas tree you can assemble. I had at least 20 of these rings (10 full bottles).

Plastic rings with a groove in the middle need to be cut into several equal parts(Fig. 2) along the generatrices of the bottle cylinder. As a result, we get convex rectangles. If you cut into 2 parts, then from such long halves you will get long lower branches of the Christmas tree, if you cut into 3 equal parts, you will get branches of medium tiers and medium length, and cutting into 4-5 parts, you get small blanks for the upper tiers of a tabletop Christmas tree . It is not at all necessary to observe particular uniformity in the dimensions of the rectangles for one type of tiers.

Next begins the rather tedious work of forming the branch. From each plastic convex rectangle (Fig. 3a), a wedge-shaped blank should be cut out with scissors (Fig. 3b). The axis of symmetry of the wedge-shaped part should be located along the corrugation groove. Immediately after cutting the workpiece, “needles” should be formed on it, making cuts along the side edges at approximately 45 degrees to the groove and radially at the end of the “branch”. (Fig. 3c). The needles are alternately moved out from the plane of the workpiece, also at 45 degrees to each other. Placing the needles up and down relative to the plane of the branch provides fluffiness to the Christmas tree.

As a result of such painstaking work, several sets (Fig. 4) of branches are obtained different sizes for desktop homemade Christmas tree. Cutting branches and then needles is quite a long task, but you can entrust this to your family as part of a collective creativity to decorate life under New Year. It should be noted that it is difficult to accurately determine the number of branches forming a specific tier by eye, so you should always have several rings in stock (Fig. 1c) for cutting branches during the installation of tiers

The place for attaching branches is the trunk, which consists of several parts (logs). The top parts of plastic bottles (Fig. 1b) were considered waste during the separation of the rings (Fig. 1c), but now they are also used in tree making to create a trunk. The base of the trunk and the lower log is the full neck part of a plastic bottle (Fig. 5a). The upper logs are assembled from blanks obtained by cutting off the threaded part of a milk bottle with a flange, as well as removing a segment of plastic along the generatrices (Fig. 5b, 5c). The segments need to be rolled into a tube and secured on both sides with plastic rivets. In a similar way, it is necessary to create several logs to attach tiers of branches. In my case, these are 3 logs, but there could be more or less. For a miniature Christmas tree, 3-4 tiers of branches on just one log are enough.

Naturally, the diameter of the trunk should taper towards the top of the tabletop tree and the diameter of the upper log should be smaller than the lower one. The larger the cut of the segment, the higher the log obtained from the conical top of the plastic bottle. For the top you need a half segment, and for the middle part about two-thirds of the whole neck (Fig. 5b). The diameter of the lower hole of the upper log should be approximately 1 mm larger than the upper hole of the lower log forming the trunk.

It's time to attach the branches to the "logs". Each log will need to place 2-3 tiers of branches. The small number of tiers does not allow effectively covering the rivet heads with branches, and a large number of spoils the aesthetic appearance of the Christmas tree. In each tier of this design you can install from 4 to 10 branches. Fastening is carried out using plastic rivets, since you will need quite a lot of plastic rivets, it is better to prepare them for future use. The easiest way is to place the branches in tiers on the lower logs (Fig. 6), since the neck of the plastic bottle is wide enough and it is convenient to hold the plastic rivet with inside finger.

If you place the branches closely along the circumference of the tier, then one rivet is enough to attach the branch to the trunk (Fig. 6-8). For those who like greater reliability, they can install two rivets side by side. The tiers of branches must be formed like the roof deck of a house - from the bottom up, then the branches of the upper tier will cover the rivets of the lower one and the heads of the rivets will be completely invisible.

In my case, in the lower (Fig. 6) and middle (Fig. 7) log of the trunk there are 2 tiers of branches, and in the upper one - 3 (Fig. 8). There are 5 tiers of branches in total. It’s quite enough to look amazingly similar to a real tree. Installation of plastic rivets on upper tier, due to its small diameter, should be done using tweezers or a medical clamp.

After securing all tiers to all logs, you can begin final assembly. But first it is advisable to decide on the top. In my case, without thinking for a long time, I built the top using the same technology as the trunk (Fig. 5), that is, by rolling the plastic into a cone. But you can do this in another way, for example, in the form of an asterisk or a ball (I like the cone better). The top of the tree is attached to the upper element of the trunk also using a rivet, installed from the inside and melted from the outside. Top part trunk, together with the top, already has a miniature tabletop Christmas tree itself (Fig. 9). You can install it on your monitor and enhance the holiday feeling...

A living Christmas tree grows from the bottom up, in the same order, and we collect logs with tiers of branches by adding “logs” (Fig. 10) to the already existing Christmas tree. It is better to connect the trunk elements together in a place covered by a branch, at three points along the circumference of the trunk. In this case, the trunk becomes rigid and will not break if the Christmas tree accidentally falls to the floor from the table, the Christmas tree is a tabletop one...

And if you insert a dynamic light part (for example, a garland) inside the Christmas tree, then New Year's Eve she will amaze those around her with her charm:


Here is such a master class. Of course, it’s a little complicated, but what a beauty it turns out!