Boric acid spraying how to dilute. Proper use of boric acid for spraying tomatoes. Boric acid and potatoes

Boric acid– crystalline powder white, tasteless and odorless, easily soluble in warm water. Boron is included in many ready-made fertilizers, primarily used for seedlings, as it helps improve their nutrition, more complete absorption of nutrient organic and minerals from the soil, thereby creating a good base for the further development of plants. Boric acid is very effective in combating late blight. actively affects the flowering of plants, enhancing it; promotes the formation of ovaries and prevents their shedding; prevents tomatoes from rotting due to excess moisture; increases the flow of sugar to fruits and seeds.
Boron as a microelement is necessary for plants to improve calcium absorption, enhance root respiration and synthesis of biologically active substances. Boric acid, or simply boric acid, or boric acid, is the most affordable and fairly effective microfertilizer with boron.
IN pure form boric acid is a white, finely crystalline powder. IN cold water does not dissolve well; in a hot place over 70 degrees – good. Acid properties are very weak. The hazard class for humans is the lowest, 4th. However, boric acid in the body of humans and animals has a cumulative effect, so it is impossible to overfeed plants with it, even those that tolerate a large excess of boron: the accumulation of boron in the body of a consumer of plant products can cause severe chronic diseases. The peculiarity of boron ions is that they practically do not migrate in plants, and grains of boron can cause local chemical burns of leaves, stems, branches and trunk.
Boric acid, as a fertilizer, is used mainly in the form of foliar feeding by spraying with strict adherence to the rules of this operation: open ground treatment is carried out in the evening, preferably on a warm cloudy day, from a high-quality sprayer that produces a misty drizzle, but not visible splashes; Spraying of the next section of the bush/crown is stopped as soon as fine dew settles on the leaves/branches. The appearance of rolling drops is unacceptable.
Need spraying: tomatoes; cucumbers; cabbage; strawberry; raspberries; currant; grape; gooseberry; onion; beet; carrot; cherry; plum; Apple tree; pears; flowers (roses, gladioli, chrysanthemums, dahlias).
The standard schedule for vegetables, stone fruits and berries is 2-fold spraying at the beginning of the opening of the buds and 5-7 days later, when the ovaries begin to form. For pomaceae fruit trees(apple, pear, quince) – 3-fold treatment: at the beginning of the phases of budding, flowering and fruit filling (withered corollas of flowers fell off). Watering under the roots is carried out in in case of emergency if there are signs of starvation, add boron.
Before planting, it is better to soak the seeds for 10-12 hours in complex boron-containing solutions (the ingredients are dissolved/mixed in the specified sequence). It is carried out to stimulate growth and prevent diseases during the germination period. A solution of a certain concentration is prepared. Dissolve 0.2 g of the substance in 1 liter of water. The seeds are soaked for 12 or 24 hours. 12 hours is enough for cucumbers, zucchini, cabbage. For 1 day, soak the seeds of carrots, beets, onions, and tomatoes. If it is planned to sow a large number of seeds, before placing them in the ground, they are dusted with a mixture of talc and the preparation. Before planting, you can soak the seeds for 10-12 hours in complex boron-containing solutions (the ingredients are dissolved/mixed in the specified sequence):

Water – 1 l.
Crystalline boric acid – 0.5 g.
Potassium permanganate (potassium permanganate) – 1 g.
Copper sulfate (copper sulfate) – 0.5 g.
Zinc sulfate – 0.5 g.
or:
Infusion onion peel(1 glass) – 0.5 l.
Wood stove ash extract – 0.5 l.
Crystalline boric acid – 0.2 g.
Baking soda (calcium bicarbonate) – 5 g
Potassium permanganate – 1 g.

First, a boric stock solution is prepared: a sample is dissolved in 1 liter of water heated to 70-80 degrees to produce steam. It is better to pour a portion of boron in advance into a bag made of thick fabric (not wool or synthetic!) and hang it in hot water. In cooled water, boric acid does not precipitate, so the mother solution is poured into the container in the order of preparing the working solution. To prepare the solution, you must observe some subtleties and follow the instructions for use and use. Dilute boric acid powder (approximately 0.5 level teaspoon) in a glass of hot water to quickly and completely dissolve it, and then add it to 10 liters of water, stir, and spray the tomatoes with this prepared solution. Typically, a sachet contains 10 g of boric acid, and a standard teaspoon holds half of the entire serving - 5 g. Be careful when working with boron and, if possible, use a spoon that is not suitable for food (or wash the spoon thoroughly after measuring substance. To measure 1 g of suspension, lay a sheet of paper on the table and carefully pour 1 teaspoon of boric acid onto it. Then, using, for example, a knife or a flat stick, divide the powder into 5 equal parts. Leave one part (this is 1 g), put the rest in a bag.
During the entire growing season, fertilizing is carried out several times. Even before sowing, the seeds are soaked in a nutrient solution for a day. To do this, 0.2 g of powder must be diluted in 1 liter of very warm water - 50-55 degrees (in cooler water, boric acid powder takes a long time to dissolve and does not completely). The seeds are placed in the solution in a gauze bag so that they do not float to the surface.
This treatment of seeds significantly increases their germination, strengthens seedlings, promoting a more complete supply of nutrients, and protects against diseases even when high humidity.
Subsequent spraying is carried out 3 more times: during the formation of buds; period of mass flowering; at the beginning of fruiting; watering the bushes with a solution at the root (for tomatoes and cucumbers).
A minimum of ten days should pass between feedings. If the plants responded well to the first treatment, it is advisable to carry out subsequent ones, and if not, it is better to refuse
To spray tomatoes, depending on the purpose of treatment, different proportions are used:
To prevent the ovaries from shedding, 1 g of boric acid is dissolved in 1 liter of hot water. After the solution has cooled, spray the tomatoes with a spray bottle.
To combat late blight, add 1 teaspoon of powder to a bucket of warm water and treat the plants. To achieve better results, it is recommended to spray the tomatoes with a weak solution of potassium permanganate a week before, and a week after treatment with boron - with a weak solution of iodine.
Spraying bushes with boric acid does not require any special skills. Produced using a spray bottle through a fine sprayer. The plant is processed in calm, sunny and dry weather. It is recommended to do this early in the morning or at sunset. When the sun appears, there should be no drops of moisture on the plant. First, the solution is prepared, and after it cools, spraying is carried out in the usual way. The solution consumption is 1 liter per 10 square meters. meters. Solutions are diluted in different proportions depending on the purposes of processing. You can purchase a ready-made solution; you only need to dilute it in water.
Preparation of a solution for spraying: dilute 1.5-2 liters of wood ash and 10 g (1 sachet) of boric acid in 5 liters of boiling water, mix thoroughly, cool, then add water to the solution to make 10 liters;
pour 1 bottle of iodine into the solution and leave the mixture to infuse for a day;
Before use, dilute 1 liter of infusion in 10 liters of water to obtain a working solution.
Application rate: 1 liter per bush. Such fertilizing will not only speed up fruiting, but also increase the resistance of tomatoes to late blight.
Cucumbers are fed according to the same scheme as tomatoes, the solution concentration is 0.05% (5 g of boric acid per 10 liters of water). Boron improves taste qualities cucumbers, stimulates the formation of ovaries and fruit development. This microelement also improves frost and drought resistance of plants, and also helps strengthen the root system of cucumbers.
Fertilizing strawberries with boric acid
The first feeding is carried out in early spring: 1 g of boric acid is dissolved in 10 liters of water (previously filled with a small amount of hot water) and 1 g of potassium permanganate, and the strawberry beds are watered, using the solution for 30-40 bushes. The second feeding is carried out before flowering, at the stage of bud extension. Plants are sprayed with a mixture prepared according to this recipe:
prepare an extract from wood ash (pour 1 glass of ash into 1 liter of boiling water, stir and leave for 24 hours, then strain the infusion);
add 2 g of boric acid to 10 liters of water (previously dissolved in large quantities hot water), ash extract and 2 g of potassium permanganate.
Consumption – 0.3-0.5 l per 1 bush. This solution is also used for obvious signs of boron deficiency in strawberries.
Boron is indispensable not only in the vegetable garden, but also in the flower garden. Ornamental plants also fed with a solution of boric acid. The optimal concentration for spraying most types of flowers is 0.5 g per 10 liters of water. For root feeding, prepare a “stronger” solution: 1-2 g per 10 liters of water.
Boric acid for ants (against ants)
Boric acid will help control ants on the site. Here are a few bait recipes:
Grind 0.5 tsp. boric acid and 2 egg yolks. Roll the mixture into small balls (no larger than a pea) and place along the ant trails.
Grind 3 boiled potatoes (in their jackets) with 3 egg yolks. Add 1 tsp. sugar and 10 g of boric acid, mix. Roll balls and place them in ant habitats.
Mix 2 tbsp. l. glycerin and 1 tbsp. l. water, add 1.5 tbsp. l. sugar, 1/3 tsp. boric acid and 1 tsp. honey Form into balls.

Boric acid is used quite often for eczema. This is an excellent antiseptic and disinfectant. Therefore, its use for inflammation of the skin is quite justified.

Definition of disease

Eczema is a skin lesion accompanied by severe itching, redness, and sores. Rashes appear in the form of bubbles filled with clear liquid.

If you do not pay attention and do not carry out treatment, the liquid gradually turns into pus with unpleasant smell. As a result, eczema becomes protracted and chronic. Treatment becomes longer and more difficult.

There are quite a few factors that provoked the appearance of the disease. The main ones include:

allergies,
nervous shocks,
synthetic clothing,
chemical irritants,
heredity.

However, the reason may be different for each person.

Diagnostics is carried out in medical institution specialist.
An experienced doctor will immediately identify the disease and prescribe the necessary treatment.
Unfortunately, eczema cannot be completely cured, but if you follow all the doctors’ instructions, it is quite possible to achieve stable remission.

Therapy includes the use of drugs for external use, and, if necessary, medications for infections and fungi. Possible use traditional methods. Taken together, all methods can provide excellent results.

Boric acid

This remedy is medical purposes has been used for quite some time. Due to its excellent solubility in water and excellent ability to penetrate the skin, boric acid is often used to get rid of dermatological problems.

Indications for the use of boric acid are:

conjunctivitis,
skin diseases,
otitis,
inflammation of the vagina,
pediculosis.

This product is included in many medicines. In addition, boric acid is very popular in cosmetology.

However, like any medicine, it has certain contraindications.

The medicine should not be used if:

intolerance to components,
pregnancy and lactation,
kidney diseases,

Do not apply the product to large areas of skin or mucous membranes.

At misuse The following side effects may occur:

headaches,
rash,
convulsions,
nausea,
vomit,
diarrhea,
swelling.

Therefore, despite the simplicity of the product, it must be used with caution and not overused.

Application

Lotions for eczema are made with 3% boric acid. They are also used for other skin diseases.
To prepare a solution of boric acid for weeping eczema, you need to dissolve 2 g of powder in 65-70 ml of hot water. If it is difficult to measure such an amount of a substance, then you can do this - take half a teaspoon of powder for 80-90 ml of hot water. Mix everything well, let cool, and use for lotions and compresses.
You can gently wipe the inflamed areas of the skin with a two percent solution.
The powder can be sprinkled on the wounds and left for a while, then carefully washed off. Thanks to its antiseptic properties, the product will not allow the infection to spread further.

Boric acid is included in many creams. For example, boron-zinc paste is often used for skin diseases.

Naftalan ointment also contains this substance.
In addition, there is simply boric ointment, used as an antiseptic and helping to quickly restore the skin.
All products containing less than 5% boric acid can be used to treat eczema.

Salicylic acid

In addition to boric acid, salicylic acid can be used for skin ailments. It is used as an external remedy. Available in various types– from alcohol solutions to creams.

Most effective means For eczema, salicylic ointment is used.

This remedy is usually used at the initial stage of the disease. Thanks to salicylic acid in the ointment, the activity of the sweat and sebaceous glands is suppressed.

After just a few days, the skin becomes more elastic, the wounds dry out, and the rashes decrease or disappear completely.

In addition, itching, which causes severe discomfort to patients, disappears. Salicylic acid in case of eczema, it promotes rapid regeneration of the skin.

Folic acid

Vitamin B9 - folic acid, is necessary for any body. The lack of vitamins of this group and fatty acids affects the condition of human skin.

Eczema often occurs with vitamin deficiency. That is why treatment must include taking vitamin complexes. Many patients report significant improvements from taking folic acid for eczema.

This vitamin helps improve the functioning of many internal organs, promotes the rapid growth of new cells, and relieves nervous tension.

Contained in many vegetables and fruits (melon, cabbage, lettuce, spinach, citrus fruits), eggs, cod liver. You can take ready-made vitamins in capsule form.

You can buy the product at the pharmacy, but it is better to first consult with your doctor.

Prevention

Eczema is an unpleasant disease that is difficult to treat. It is worth following some rules to avoid illness:

Monitor your diet, try to ensure that your nutrition is correct.
Take vitamin complexes periodically.
Reduce contact with chemicals.
Avoid nervous shock.
Try to find out all allergens and reduce contact with them.

Dermatological diseases always bring quite noticeable discomfort to a person. There is no need to think that they will go away on their own and do not self-medicate.

It is best to consult a doctor to make a diagnosis and prescribe the necessary therapy.

To get a good result, you need to be patient, follow all the doctor’s instructions and not give up treatment in the middle.

You can ask a DOCTOR a question and get a FREE ANSWER by filling out a special form on OUR SITE, follow this link

Boric acid

Release form and composition

Boric acid is available in the form of powder, alcohol and aqueous solution, and ointment.

Indications for use of Boric acid

According to the instructions, Boric acid is used for:

Dermatitis (lotions with a 1-4% aqueous solution on weeping lesions);
Red acne (washing the skin with a 2% aqueous solution);
Pityriasis versicolor (wiping with a saturated aqueous solution);
Pyoderma (wiping the skin with 0.5, 1, 2, 3, 5% alcohol solutions around the foci of the disease);
Chronic otitis (injection of powder into the ear, ear drops and turundas with a 3-5% alcohol solution);
Dermatoses, dermatomycosis, eczema, neurodermatitis, psoriasis (5-10% boric ointment, powder);
Hyperhidrosis (foot baths);
Fungal diseases of the feet, diaper rash and excessive sweating of the feet (powder);
Dry and cracked skin (5% boric ointment);

as well as for rinsing the mouth, pharynx and pharynx, washing the eyes and urinary tract.

Contraindications

According to the instructions, Boric acid is not used if:

High sensitivity of the body to this substance;
Acute inflammatory diseases of the scalp;
Impaired kidney function;
Pregnancy and lactation;

as well as in children under one year of age.

Method of application and dosage of Boric acid

Boric acid in solutions, powder and ointments is intended for external use.

Eye rinsing is performed with a 2% aqueous solution of Boric acid.

For dermatitis and eczema, lotions with a 1-4% aqueous solution are applied to weeping lesions.

For red acne, the skin is washed with a 2% aqueous solution.

To wash the urinary tract, rinse the mouth and throat, use 2-4% aqueous solutions.

For pityriasis versicolor, a saturated solution of Boric acid (2 teaspoons of powder per 200 ml of water) is rubbed into the areas of inflammation once a day for 7 days. Next, after the rash goes away, the solution is rubbed into the skin 1-2 times a week for 1-2 months.

Boric acid powder is also used for insufflation after surgery. on the middle ear, for fungal diseases of the feet, diaper rash and excessive sweating of the feet in the form of powder.

For otitis, a 3-5% alcohol solution of Boric acid is instilled into the ear 2-3 times a day, 3-5 drops, or the turunda is moistened with it for insertion into the ear.

0.5, 1, 2, 3, 5% alcohol solutions for pyoderma are used to wipe healthy areas of the skin located around painful lesions, and also treat skin for eczema and diaper rash.

A 10% glycerin solution of boric acid is used to lubricate the mucous membranes for colpitis and diaper rash.

For pediculosis, 5% boric ointment is used. Apply 10-15-25 g of it to the scalp for half an hour, and then rinse with water.

2–10% boric acid ointments are used for psoriasis, neurodermatitis, dermatosis, ringworm, and eczema.

Many people think that caring for tomatoes takes a lot of time and effort, so summer residents do not always undertake to grow this crop.

In fact, strong and well-grown seedlings are the key good harvest. When using useful foliar feeding You can provide the plant with the necessary vitamins for the proper development and growth of the tomato.

Experienced gardeners have been using boric acid for a long time, adding it to spray plants that are deficient in boron.

Boric acid is Chemical substance in the form of crystals, which is widely used in gardening. Based on it, fertilizers are made to feed plants: this improves the nutrition of seedlings, increases fruiting and promotes a good flow of sugar to the fruits.

In fact, the tomato does not really need additional feeding unless necessary. They are recommended when there is a high risk of infection, as well as when there is a shortage of certain elements.

One of the important elements found in the soil is boron - its deficiency significantly affects the development of the crop and the future harvest. Spraying with this solution stimulates the growth of the root system and reduces the likelihood of infection. The composition is an excellent stimulator of metabolic processes and perfectly increases the level of chlorophyll. Seedlings planted in an area fertilized with boric acid will be more resistant to adverse external factors.

What are the benefits of boric acid fertilizers?

Boron - important element in plant development. If the soil in which the tomatoes are planted is deficient, the fruits will be more susceptible to various diseases. Boron improves flowering well, which prevents tomatoes from rotting in cases high humidity. Using this preparation for spraying, you can increase the yield by 20%.

It is worth noting that this fertilizing improves the taste of the fruit: they become sweeter and juicier.

What are the benefits of fertilizing with the addition of boron:

Spraying tomatoes with a solution of boric acid allows the plant to absorb more nutrients from the soil, and this is quite important if the crop is grown at home. Such plants are more susceptible to influence external factors than those that grow in open beds.

It is worth taking into account that this product is absolutely safe for humans, so tomatoes fed with boric acid will not cause any harm to the body.

Flaws:

This method of feeding has no disadvantages. The main thing is not to harm the plant by oversaturating it with ingredients.

How to determine boron deficiency

This is quite easy to do. The lack of an element can be determined by appearance plants. A few weeks after the tomato is planted permanent place habitat, it will be possible to see whether the plant is developing well. If the leaves on the tops begin to lose their normal color, this indicates that it is time to fertilize the vegetable with boric acid.

It is worth noting that the top of the crop will always remain green; the leaves below change color. In addition, they will tend to curl and the stem will weaken.

A deficiency of this element can also manifest itself in fruits - black dots and spots appear on tomatoes. If this happens, it is necessary to fertilize, otherwise you will not get a good harvest.

When white mold joins all the signs, this signals fungal disease- late blight. In this case, it is recommended to add iodine to fertilizers.

When to process tomatoes

If there is a boron deficiency, the plant does not produce a good harvest, because some of the fruits rot and die. Most often, boric acid is used on initial stage development of the crop, until the plant begins to bloom, it should not be introduced. It is very important not to touch the bush during the flowering period and not to fertilize it, otherwise this may slow down the growth of the vegetable crop.

As soon as the ovaries appear, fertilizers are renewed. The ready-made solution can be purchased at the store or made by yourself. For a small number of plants, you can prepare the composition according to the following recipe: 1 g of acid and 1 liter of hot water.

Spray only from a spray bottle so that the liquid is broken into small particles.

In addition, this composition can be used for watering, but you should be careful with this. To avoid burns, the tomatoes should be well watered before adding acid. plain water so that the solution is not so concentrated.

How to spray correctly

Fertilizing with the addition of boric acid is carried out in two ways:

root fertilizer - watering the plant with a useful composition;
foliar fertilizer - spraying the tops from a spray bottle.

In order to eliminate the lack of this element, you can treat the seeds with it before planting. In this case, it will be enough to soak them for 24 hours in weak solution boric acid.

You can use another method - add a little boron powder to the hole where the seeds will be planted. This method will also be useful.

When to start the procedure

Spraying and root feeding should be carried out in the morning or evening time. It is worth taking into account that root feeding should be done when it is really known that there is a lack of boron in the soil. With such feeding there is a high risk of damage root system bush. If the dosage is incorrect, the plant can be burned, which will result in its death.

This method produces fertilizers in soddy-podzolic soils, mixtures of sand and peat.

How to dilute the solution: recipe and proportions

You can spray boric acid solution on both seeds and adult plants. To do this, you need to prepare the composition in the following proportion: 1 g of powder and 1 liter of hot water. This way the powder will dissolve well and the mixture will reach the required concentration. You can dilute the composition in a smaller amount of hot water, and then dilute it with warm water, so as not to wait for it to cool down and immediately begin processing.

Boric acid with potassium permanganate

This mixture of components will protect plants from damage by fungal diseases such as late blight. For preventive purposes, vegetable tops are treated in mid or late June. This feeding is carried out in 3 stages:

first, spraying is carried out with the addition of manganese crystals;
treatment is carried out after a week boron solution(to do this, dilute 1 tablespoon of powder in 10 liters of hot water);
after 7-10 days it is necessary to spray with the addition of iodine.

In this way, the plant can be protected from late blight and similar diseases until the end of August.

It is worth considering that properly used fertilizers with the addition of boron will significantly increase the fruiting of tomatoes. This composition is one of the best for any type of fertilizer.

How long does the prepared solution last?

Fertilizers with boric acid are one of the few that can be stored for a long time and not lose their properties. useful properties. Therefore, after watering the tomatoes with the composition, it can be safely put aside in a cool, dark place until the next feeding.

How to spray

In each growth period, a vegetable crop requires special care and fertilizing.

For proper vegetation, boron plays an important role, so it is undoubtedly worth processing with it.

Fertilizers that contain boron act rather slowly if they are applied to the soil in powder form. To form ovaries, it is better to use spraying and sometimes watering. The method and dosage of dilution is the same - 1 g per 1 liter of hot water.

When planting seedlings in the ground would be better suited a method of pouring powder into the soil at the place where the crop will be planted. This should be done a day in advance.

Process mature plant better way spraying. For preventive purposes, fertilizing should be done no more than twice per season. When tomatoes are sick, you can resort to more frequent spraying.

Greenhouse processing methods

For vegetable crops, which are grown in a greenhouse, this type of feeding will be very useful. Plants kept in a greenhouse are weaker than those growing under open air. Treatment with a boron mixture will revive the vegetable in a matter of days and strengthen its root system. In addition, the composition will speed up the flowering process and increase the growth of greenery. This fertilizer is often used when the leaves of the plant begin to curl and fall off.

In order to process a tomato in a greenhouse, it is recommended to irrigate not with boron alone, but with a composition with the addition of urea and mullein.

In the video, the gardener shows how she dilutes boric acid and then sprays tomatoes with this fertilizer.

During the period of processing tomatoes with various fertilizers, you should adhere to some rules:

Never spray vegetables with cold mixture. The temperature of the solution should be approximately the same as the soil.
For spraying from a spray bottle optimal temperature will be 20-25 °C, but only with high humidity. When the water temperature rises and the humidity becomes lower, the solution simply dries out without giving any result.
Sometimes you shouldn’t start processing all the tomatoes in the garden at once. First, you can test on one bush, and after a while process the rest.
It is very important to follow the dosage necessary components for feeding. Often ingredients are added to the composition (for example, iodine), which in large quantities can cause irreparable harm to the plant. Do the entire procedure strictly according to the instructions, without overdoing it with spraying and watering.

Feeding tomatoes with boric acid is an effective microfertilizer. Correct Application And exact dosage will allow you to achieve good results in growing this vegetable. Thanks to this product, you can save a considerable amount of money and do without the use of chemical additives. Boric acid will provide the tomato with good protection from adverse conditions, and the summer resident will be pleased with a generous and sweet harvest.

Common fertilizer used for development different plants, – . It has a number of significant advantages aimed at plant development. It is important to know how to dilute boric acid for spraying tomatoes, since if the proportions are not observed, you can only harm the bushes.

How to dilute boric acid for spraying tomatoes?

To benefit from this fertilizer, it is recommended to carry out the procedure three times: during the formation of buds, during mass flowering and from the beginning of fruiting. A minimum of 10 days must pass between sessions. If the plant reacted poorly to the first spraying, then it is better to abandon such treatment. Dilution of boric acid for spraying tomatoes is carried out in several stages, so, first, the required dose is dissolved in a glass of hot water, but it should not be boiling water, and then the concentrated solution is added to 10 liters of clean water.

What does boric acid do for spraying tomatoes?

Boron is an important mineral that provides good growth and better fruit ripening. Before you figure out how to dilute boric acid for spraying tomatoes with other ingredients, you should pay attention to the benefits of this substance:

Fertilizer helps increase the number of ovaries and the growth rate of tomatoes. As a result, you can increase the yield on each bush.
The use of boric acid for tomatoes is also good because chemical processes begin in the fruits that increase sugar levels, so the taste of vegetables becomes more pronounced and sweet. The natural taste parameters are not affected in any way by such processing.
In the presence of required quantity Boron in plants absorbs nitrogen compounds much better. As a result, the plant takes on a healthy appearance, and the fruits become beautiful and tasty.
Thanks to this mineral, the plant’s immunity is strengthened, so it better resists various diseases and diseases.
If a plant lacks boron, growth and its ability to produce a good harvest are impaired.

In what proportion should you spray tomatoes with boric acid?

This supplement is sold in the form of a white powder that dissolves well in water. To obtain correct composition, you need to act step by step, as mentioned earlier. With boric acid, the recipe for feeding tomatoes can be used for watering at the root and spraying. In the second case, the solution will be less concentrated, so for 10 liters of water there should be 5 g of powder.

Foliar feeding of tomatoes with iodine and boric acid

An excellent combination product that will help increase productivity. It is recommended to carry out the procedure when the bushes have finished flowering and they enter the fruiting phase. In addition to the fact that treating tomatoes with boric acid and iodine will help improve the quality of the fruit, it will also protect against many fungal diseases.

For a simple solution, dilute 5 g of acid in 200 ml of warm water, and then add 10 drops of iodine. Dilute the mixture in 10 liters of cold liquid. Spray the solution, paying attention to the leaves.
The following composition is safer: dilute 5 g of acid in hot water, and then dilute in 10-15 liters of cold liquid. Spray, and a week later repeat the procedure, but with a different solution: 10 liters of water, 1 liter of milk and 15 drops of iodine.

Foliar feeding of tomatoes with ash and boric acid

An excellent supplement is wood ash, which contains many useful minerals. In addition, it is an excellent means of pest control. For spraying, ash and boric acid for tomatoes are mixed as follows:

You need to dilute 10 g of boric acid in 200 ml of hot water.
Separately mix 2-3 liters of water and 1.5-2 liters, and then mix well. Pour in the prepared acid solution and increase the volume to 10 liters.
All that remains is to add 10 ml of iodine and mix everything thoroughly. Ready composition It is better to use it for root feeding, but spraying the bushes is also possible. 1.5-2 liters should be consumed per bush. Repeat the procedure once a week.

Feeding tomatoes with boric acid and potassium permanganate

Manganese has a huge number of benefits that are essential for vegetable crops. He is excellent protection from pests and diseases, and also contains potassium and magnesium, beneficial for plants. Treatment of tomatoes with boric acid and potassium permanganate can be carried out according to the following scheme:

In a weak pink solution of manganese, dilute the acid, the amount of which should be on the tip of a knife. Apply the prepared product before flowering, which will increase the yield and enhance the taste of the fruit.
There is another option for spraying: mix 10 liters of water, 2 g of potassium permanganate and boric acid, and also add 1 teaspoon of iodine and 1 tbsp. ash.

Boric acid, iodine, potassium permanganate, milk for tomatoes

This complex feeding combines several healthy products, thanks to which it is able to increase the number of ovaries on tomatoes and leaves, and also protect them from diseases. For tomatoes, boric acid is combined with milk and other components in a certain proportion.

Dilute 1-1.5 g of acid in hot water, but not in boiling water. After this, add manganese at the tip of the knife. The result should be a dark pink solution.
Add 200 g of homemade or 250 g of store-bought milk. At the next stage, pour in 1.6 cubes of iodine using a syringe.
The last component is urea, which should be taken 1 tbsp. spoon. Mix everything thoroughly, and then dilute the resulting solution in 10 liters of water. All that remains is to spray.
You can apply this treatment 2-3 times per season. The entire plant should be sprayed.

How to properly spray tomatoes with boric acid?

It is recommended to carry out the procedure in dry weather when precipitation is not expected the next day. It is better to spray and water tomatoes with boric acid in the morning or evening, which minimizes the risk of burns. Spraying gives a faster effect, since the absorption of nutrients through the leaves occurs almost instantly. It is important to know not only how to dilute boric acid for spraying tomatoes, but also how to do it correctly:

Prepare a good sprayer with a fine spray. As a result, the solution will fall on the bushes in the form of fog, and not large drops.
Spraying consumption is minimal, so 50-100 ml should be used per plant.
Please note that it is best nutrients are absorbed from bottom side leaves, so it is important to treat the entire plant.

Content

Every family first aid kit contains an antiseptic. This can be hydrogen peroxide or boric acid, and the latter medical drug is more in demand and is used in many medical fields. When treating, it is important to understand the difference between boric alcohol and boric acid, so as not to harm your health.

What is boric acid

Boric acid - application

This antiseptic drug has several forms of release, including powder, medicinal solution, ointment. If the powder form is indicated to be prepared immediately before use, then the bactericidal medicinal ointment is best stored in the refrigerator, according to the expiration date. The use of boric acid is appropriate for the following clinical pictures:

extensive skin lesions of an infectious nature;
in complex treatment of conjunctivitis, blepharitis;
intensive therapy for pediculosis;
inflammatory processes ENT practices;
infectious lesions of the mucous membranes.

In ear

If the ear canal begins to hurt, you should not endure such lumbago, it’s time to put this time-tested antiseptic into practice. Boric acid is instilled into the ears only on the recommendation of an otolaryngologist, otherwise such a procedure can harm health and cause complications. If there are no medical contraindications, the doctor gives valuable recommendations. Treatment of the ear with boric acid involves two directions for using an alcohol solution:

Use as drops, performing 2 emissions from a pipette into each ear canal. like this home procedure perform up to 3-4 times a day until the symptoms of pain completely disappear.
Pre-moisten a cotton swab and then temporarily place it in the ear canal where it hurts. The composition will begin to act immediately, and the unpleasant sensations will subside within half an hour. For both cases, it is important to discuss the question of whether boric acid can be dripped into the ear individually with an otolaryngologist.

For acne

For severe acne, this remedy, proven by generations, is also indicated, which costs a penny in the pharmacy. Boric acid for acne on the face is a publicly available method, but it is first important to make sure that the body is not hypersensitive to active ingredients. Dermatologists advise using an alcohol tincture, which can effectively treat visible foci of pathology. You can completely get rid of acne in as soon as possible, because the medicinal composition has a drying, anti-inflammatory, bactericidal effect.

For eyes

Since the mucous membranes are highly sensitive, doctors advise using only an aqueous solution, which is also effective against increased activity of pathogenic flora. Boric acid in the eyes is appropriate for conjunctivitis; it can be used at home only after an individual consultation with an ophthalmologist. If you drop 2 drops on each eye, the inflammatory process weakens within 2-3 days. Use medicine until the symptoms of the disease completely disappear.

The real help of this medication is appropriate against the background of local use of antibiotics. This aid accelerates the therapeutic effect, ensures rapid recovery of an adult patient or child. The instructions indicate contraindications and side effects, which you should read carefully before starting the course. This is especially true for interested patients during pregnancy.

From cockroaches

If there are infestations at home harmful insects, you shouldn’t spend money on expensive products. In practice, a proven folk recipe for preparing poison really helps. Boric acid is especially effective against cockroaches; the main thing is not to violate the proportions or change the ingredients. Folk recipe creating a bait to destroy such annoying pests is as follows:

Break the egg, remove only the raw yolk, which causes increased appetite among pests. To kill cockroaches, grind it in a bowl and add 50 grams of powder. Bring the mixture to the consistency of dough, then prepare portioned balls from it, which are then placed in the corners of the apartment. The poison acts instantly.
To remove pests, you can boil an egg, one raw potatoes, add boron hydroxide, thereby preparing a poisonous puree to remove household pests. Form the composition into balls, which can be used at home to effectively poison cockroaches.

From ants

From carbon deposits

Cleaning the outer walls of frying pans and pots gives the housewife a lot of trouble, since carbon deposits are very difficult to remove, especially if it gets under the handles. To avoid wasting money on expensive household chemicals, powder or alcohol tincture can be used to wash such kitchen utensils. You don't have to breed percentage composition, but for washing dishes it is better to use rubber seals.

The boric acid solution acts instantly, so there is no need for additional salt or alkali. If necessary, three components can be combined in one cleaning composition, mixed thoroughly, and used for cleaning different surfaces. Boric acid for removing carbon deposits is an affordable and high-quality dishwashing product.

Boric acid for plants

People who garden are well aware of how to dilute boric acid into powder, as it is an effective liquid fertilizer. For example, if you spray tomatoes according to the instructions, the harvest will pleasantly please you with juicy and rich fruits. Boric acid for plants is considered a reliable protector against all pests that strive to destroy the root system.

Boric acid price

Boric powder is sold in pharmacies, like other forms of this medicine. Adults and children can take it, but only according to the instructions and recommendation of the attending physician. Prices are minimal, no prescription required. Therefore, this medicine replenishes almost every family medicine cabinet. The prices for this medical drug are as follows and depend on the form of release of pharmacological products.