Brick-like facing tiles for interior. Types of decorative brick-like tiles for interior decoration. Buying gypsum tiles for brick – where is it sold and how much does it cost?

Decoration of walls inside the apartment, as well as the facade of the house decorative bricks or a material that imitates brickwork - has never gone out of fashion. However, unfortunately, it is not always possible to use interior decoration housing real brick, as it will weigh down the floor slabs of multi-story buildings. In addition, making ideal masonry “for jointing” is not so easy, because this requires at least minimal experience as a mason.

Much easier to use others interesting ways that allow you to achieve the desired result. Brick imitation can be produced in different ways and, which is typical, can be installed by anyone, even a novice finisher.

Considering the fact that brickwork has remained popular for decades and is used to reproduce various interior styles, manufacturers did not miss this moment and developed several types of material that can replace natural brick.

This type of finish is made in different forms– it can be flexible or rigid tiles, the size of the end side of a brick, or large Wall panels, immediately covering an entire section of the wall, made from polyvinyl chloride (PVC), MDF or fiberglass cement.

Flexible brick-like tiles

Flexible tiles that imitate brickwork are great for interior and exterior wall decoration. This modern material is not only decorative, but also protective coating for surfaces and has a number of positive qualities - this includes resistance to external atmospheric influences, impact resistance, vapor permeability, inertness to microorganisms, as well as ultraviolet radiation, and, of course, an aesthetic appearance and a fairly simple processing and installation process.

“Flexible brick” is easy to install not only on straight smooth surfaces, but also perfectly bends around external and internal corners premises.

This material is used to decorate walls inside apartments and houses, in particular, in rooms such as hallways, corridors, kitchens, living rooms, loggias. It is also suitable for external façade walls. It is very convenient to use such tiles for cladding columns, fireplaces, small architectural forms, as well as in any areas where such design is planned. Regardless of the complexity of the surface configuration.

The tiles can be used to finish the entire wall or attached to individual sections. Since the material has many colors, it is possible to make the finish monochromatic or use tiles of different shades, harmoniously combining them with each other.

Installation of “flexible brick”

For installation flexible tiles no complex electric tools. You will only need to prepare:

— an even spatula 120÷150 mm wide – for mixing and applying glue;

- a notched trowel with a ridge 4 mm high and 150÷200 mm wide;

— building level 1000÷1500 mm long;

— a ruler 1000÷1500 mm long;

- colored marking cord for marking lines;

- a simple pencil;

- powerful scissors;

- a brush 12 mm wide for leveling the mortar in tile joints.

For materials other than tiles, you will need a primer for the walls and a special

For installation, a dry construction mixture can be used - ordinary tile adhesive, but it is more convenient to use a ready-to-use composition packaged in plastic buckets. In any case, when purchasing tiles, you should immediately consult with the seller regarding the adhesive suitable for a particular material.

In order for the masonry to be smooth and neat, the wall must be put in order before installation, by cleaning and leveling its surface. After the leveling solution has dried, the wall must be primed with an antiseptic composition, which will give the materials higher adhesion and will not allow mold to appear under the cladding layer in the future. Once the primer has dried, you can proceed to installing the tiles.

In addition, you need to take into account that installation work must be carried out at a temperature not lower than +5 degrees, otherwise adhesion between the materials will be insufficient, and the tiles may subsequently begin to peel off from the surface of the walls.

Prices for imitation bricks

brick imitation

• The first step is to outline the wall surface into even zones along which glue will be applied and the tiles will be fixed. If the entire wall is to be covered, then it is necessary to beat off the upper and lower limiting lines.
• The glue is not applied to the entire surface, but to individual, marked zones of about 1000×500 mm. The layer of adhesive mass should be approximately 2÷3 mm - it is applied using an even spatula, and then distributed over the entire area to be covered with a notched trowel to create grooves of the same height.

• The tiles are glued in order, and if the first row starts with a whole tile, then the second - with half or one third of the “brick”, depending on the desired location of the masonry seams.

Dividing the “flexible brick” into pieces at any angle, without using any power tools, is quite simple: it is marked and cut along the line with ordinary scissors.

• The seams between the rows can have different thicknesses - this parameter will depend on the preference of the master, but usually the gap is left at 10 ÷ 12 mm. The selected size of the seams is taken into account immediately when marking the wall into zones for installation.

• “Flexible brick” easily bends around protrusions formed at any angle, as well as internal corners or rounded walls, if they exist on the surface to be finished.

• When the intended surface area is covered with tiles, you need to immediately level the mortar in the horizontal and vertical joints, otherwise the glue will set and it will not be possible to accurately level it. Smoothing the solution is carried out using a relatively thin brush of medium hardness, slightly moistened with water.

The fact that flexible tiles do not require additional purchase of grout for joints can also be safely called an advantage of the material, since you do not have to incur extra costs.

Video: flexible facing tiles with excellent clinker brick imitation

Rigid facing tiles “brick-like”

Clinker tiles

Clinker tiles are used for internal lining walls not as often as other types of material imitating brick, as it has a fairly high price. It is often purchased for facades, given its highest performance characteristics. However, it can also be used for interior decoration, especially if you are going to cover a stove or fireplace.

It is made from natural highly plastic clays, without the use of artificial dyes and plasticizers. The raw materials are pressed and fired at high temperatures, reaching up to + 1150÷1200 degrees. Thanks to this, clinker tiles are environmentally friendly pure material, which has unsurpassed natural qualities of durability and reliability, which are multiplied during the production process.

This finishing material is excellent for both interior and façade cladding. It has a very low moisture absorption coefficient, high frost resistance and wear resistance, inertness to temperature changes and almost any chemical influences.

The decorative effect of clinker tiles is not inferior to its physical and technical characteristics, since the variety of design options allows you to choose a material to suit every taste and style of the interior of the premises or the facade of the building. The finish can have a rough, glazed or natural, untreated surface. Tiles of different sizes and shapes are available for sale, and this factor also allows you to bring the most daring design ideas to life.

Installation of brick-like facing tiles

As mentioned above, all tiles that have a certain rigidity are mounted on the wall in approximately the same way. The work will require the same tools as for " flexible brick", and in addition, to cut this material it will be necessary to prepare a hand-held circular saw or grinder with a disc on stone.

The work of laying cladding from this type of material is more complex, since the finishing already has significant weight, and after installation it requires careful sealing of the seams between the tiles.

The cladding process is carried out in the following order:

• Laying should be done on a prepared, primed and relatively flat wall.
• Marking the wall surface is carried out in the same way as for installing any piece of cladding material: straight lines are struck along the upper and lower levels of the masonry, then it is recommended that the entire distance between them be calculated and divided horizontally so that the intended number of rows can be accommodated in this area masonry, with mandatory consideration of the thickness of the seams between them. It is especially important to carry out this process if you do not have sufficient experience in wall cladding - marking will help make the masonry perfectly even.

When marking, you need to allocate 10÷12 mm to each of the seams between the rows.

• Next, an adhesive mass is prepared, which is selected in accordance with the type of material on which the finishing tiles are made.

• Laying begins from the bottom row, which is carefully verified by the building level, since the accuracy of the entire wall cladding will depend on its horizontalness. If the first row starts with a whole tile, then the second and all subsequent even rows start with ½ or ⅓ tiles.
• Next, glue is applied to the wall with a spatula in a layer of 3 ÷ 4 mm. After this, the mass is distributed with a notched trowel, which leaves grooves of equal height, ensuring the most uniform distribution of the adhesive when pressing the tile. When laying some heavy types of tiles (the same clinker), it is additionally recommended to apply glue to back side facing material. Therefore, before starting work, you should be sure to study the instructions included with the package, which clarify the nuances of installing a particular material.

• During the installation process, it is necessary to monitor the evenness of each of the laid rows.

• To ensure that the width of the seams between the tiles on the entire tiled surface is the same, some craftsmen use special calibrator tabs of the same size. They are temporarily installed between the rows, and after the adhesive mass has set, they are removed and installed again, but on the upper rows. As such calibrators, you can use a wooden bead or silicone posts.

• To cover external corners, special shaped elements are used that can disguise existing chips and make the corners neat and protected.

• Upon completion of the masonry and after the glue has completely dried, the seams between the tiles must be securely and accurately sealed using grouts specially designed for this purpose. You can fill the seams in different ways:

- Use ready-made compositions in tubes, using a special gun.

— Place the mixed grout in plastic bag, and then cut off one of its corners diagonally to the width of the seam and carefully squeeze the solution into the gaps between the rows.

Unlike PVC panels, MDF finishing is not recommended for use in rooms with high humidity, but it is perfect for leveling the walls of hallways, corridors, insulated balconies, and living rooms.

Manufacturers also thought about the design of the corners, making special shaped elements for this.

Glass fiber reinforced concrete panels

Special mention should be made of glass fiber reinforced concrete panels. This facing material It is made on the basis of ordinary cement with the addition of glass fibers, which increases the strength of the slabs tens of times. For external finishing, panels can be additionally reinforced metal elements, which increase the weight of the structure, but make it resistant to mechanical stress.

Reinforced only with fiberglass, the panels do not have a particularly intimidating weight, and their dimensions are still compact in thickness. The solution for their manufacture is colored in the mass, so the slabs are not afraid of small chips and abrasions. When producing molding sand, some manufacturers add colored glass fiber to it, which is slightly darker or lighter than the main tone, but is in perfect harmony with it - this gives a very interesting effect. In addition, additional application of paint to the surface of finished and assembled products is allowed.

It is well suited for interior decoration, but still more often it is used to transform the facade of the walls of a building.

Environmentally friendly slabs do not weigh down the walls, as they have a small mass. They perfectly protect surfaces from moisture and mechanical influences, as well as from the penetration of radio emissions into the house, and have a number of other attractive advantages. However, the cost of such facing materials is quite high, so not every owner can afford such finishing.

Installation of brick panels on the wall

If the wall surface is fairly flat, then the panels can be fixed to it without installing a frame structure. Lightweight PVC boards are glued to a cleaned and primed surface using one of polymer adhesives. For example, “liquid nails” are well suited for this.

Finishing panels based on MDF have significantly more weight, so in addition to glue, they are fixed to the wall with dowels in four to five places.

Glass fiber reinforced concrete panels can be fixed to flat wall using cement-based tile adhesive.

In the case when the wall surfaces have significant distortions, they are corrected by fixing frame structure, consisting of metal guides or wooden beam, set exactly in the required plane according to the building level. Some manufacturers make special subsystems for their products, mounted on the wall or on installed frame. In this case, the panels are hung on special elements of the subsystems.

Subsystems may have different designs, therefore, when purchasing facing slabs and fastening systems to them, it is necessary to check the compatibility and availability of the attached installation instructions.

It is clear that if you plan to install panels on a subsystem, the frame elements must be located in accordance with the features of this model.

The most simple view fastenings are made of plastic panels made according to the principle of siding construction. They have a special perforated mounting strip in the upper part, through the holes of which the slab is fixed to the wall or frame. In this case, horizontal sheathing elements are fixed to the wall surface, at a distance from the visible part of the slab.

Prices for facing bricks

facing brick

Installation of any facing panels begins from the bottom of the wall, usually from the corner elements.

Homemade wall design options for brickwork

If you want to save money by making an imitation of brickwork on one of the walls of an apartment or house with your own hands, you can use original techniques developed by folk craftsmen.

There are several common options that do not require special costs for the purchase of facing slabs or panels, and also do not create any particular difficulties in installation:

• Self-production of polystyrene foam tiles with a thickness of 10÷12 mm. For this purpose, it is recommended to use extruded material with higher performance indicators than conventional white foam.
• Creating a brickwork relief using a stencil.
• Reproduce the desired design on the wall using masking tape.

Brick-like tiles made of polystyrene foam

If you plan to use the process of melting the edges of foam plastic in the manufacture of tiles, then the work should be carried out in the open air, protected Airways using a respirator, since this material is flammable and releases toxic substances when burned and melted.

• The first step is on the prepared, leveled and primed wall surface, using a ruler, plumb line, building level and a simple pencil marking of “brickwork” is carried out. The wall is drawn into horizontal stripes and vertical partitions, which determine the size of the bricks and the seams between them and the masonry rows.
• The second step is to mark the sheet of polystyrene foam into tiles of the selected size.

• Then the material is cut into individual elements with a stationery knife. The number of such blocks must correspond to the number of bricks required to decorate a certain section of the wall on which the marking was made.

• Next, in order to achieve the most reliable effect of imitation brick, you need to work on the resulting tile - this can be done in different ways. Its surface is treated with sandpaper in different or one direction, and notches and grooves are made on it with a knife or other sharp instrument. You can also use a heated soldering iron for these purposes.

Another option is to melt the edges and outside tiles using a regular lighter or torch. In this case, the front surface takes on soft, smooth shapes.

• After painting the tiles in the chosen color, its relief will be more pronounced. Paint can be applied before installing the tiles or after the wall cladding is completely completed.

Painting can be done using a brush or spraying the coloring composition from a can. The main thing is that the paint does not cause dissolution or softening of polystyrene foam - it is better not to experiment with organic-based compositions, giving preference to water-soluble ones.

• Laying of foam tiles is carried out according to wall markings using “liquid nails” glue, which is applied to the back surface in three points with a thickness of 3–4 mm.
• The final stage will be the design of the seams between the bricks and rows.
• It should be noted that if the design does not provide for highlighting the tile joints with a different color, then painting the cladding can be done after the grout solution has dried.

Imitation of brickwork using a stencil

In order to make an imitation of brickwork using a stencil, you will need a cement-based mortar. It is best to purchase it in the form of a ready-made dry building mixture for plastering works, since it already has all the necessary additives that make it flexible and convenient for work.

The solution can be made independently from two materials - this is a plaster and adhesive cement mixture, which are taken in proportions of 1:1. To increase the plasticity of the solution, add a tablespoon of liquid detergent per 5 kg of the finished mixture.

• The wall must be well cleaned, primed and dried.
• The solution can be applied to its surface using wide spatula or simply with a rubber gloved hand. The thickness of the applied layer should be equal to the thickness of the stencil strips. This moment will depend on what kind of surface the brick should have - smooth or rough.
• Further, so that the stencil does not have “stickiness” with the layer of applied solution and is easily separated from it, it should be moistened with water - this can be done with a sponge or damp cloth. If the stencil is made of rubber, then you can simply dip it in a basin of water, but in this case you need to wait for the excess to drain, otherwise excess moisture can ruin the whole work.
• After this, the stencil is pressed against the applied fresh plaster and carefully pressed so that the relief of the brickwork remains on it.
• Next, the stencil is removed and applied further, next to the just pressed relief. Here you need to try and apply it so that the masonry is even and its horizontal seams do not become distorted.
• When the relief has been applied to the entire surface, it is left until completely dry.
• After drying, the wall should be completely covered with one color - usually light shades are chosen for this, since it will be easiest to apply any color to them, as well as highlight dark shade or leave all masonry seams light.

Painting imitation brickwork is already creative process, so you can allow yourself various fantasies. In this case, of course, it is necessary to keep in mind that the chosen color will set the mood for the entire interior of the room.

Creating a brickwork relief using plaster and masking tape

For this technology of reproducing imitation brickwork on the wall, you will need the cement composition already mentioned above plaster mortar and masking tape. Some craftsmen even use electrical tape, however, it does not adhere to the wall well, while high-quality masking tape has excellent adhesion to any surface.

The width of the tape should be no more than 14 mm, and if you couldn’t find tape of that width, you’ll have to buy a wider one and carefully cut it in half right in the skein. If its edges are not perfectly smooth, this is not a big deal at all, since this factor will not affect the accuracy of the relief, but rather will even play into your hands.

• The first step is to mark the prepared surface of the wall to be tiled for brickwork.

• Next, masking tape is glued along all the marked lines on the wall. It should be secured so that the edges of the horizontal pieces of tape extend beyond the edges of the surface being designed, and the solution should not be applied to them, and the vertical pieces should be well glued to the horizontal ones, always on top of them.
• Then, on the surface of the wall, on top of the glued grid of adhesive tape, using a wide spatula, apply a solution with a layer thickness of 5-6 mm - the height of the relief will depend on this parameter. Don't apply too much thick layer, otherwise you will have to cover the seams with grout.
• After applying the solution completely to the entire wall, you can walk over it with a damp rubber glove to create a textured surface. If you plan to leave the surface of the “bricks” flat, then you should not touch the mortar layer.

• The most interesting stage in this method of simulating brickwork is removing the masking tape, since after this operation the relief of the wall will be immediately visible. Several strips of tape are picked up from one of the free sides and begin to be carefully peeled off from the wall, and as a result, in place of the peeled tape, seams are formed between the “brick tiles”. After removing the tape from the entire surface, the wall should be left until completely dry.

• It is recommended to let the wall dry before painting - this operation will make the surface more pliable for the next stage - painting, since the paint will lie flat on the surface and will not be absorbed into the surface. plaster layer. Which shades to choose for the wall depends on the preference of the master.

Video: How to imitate brickwork using plaster and masking tape

From all of the above we can conclude that construction market has an excess various materials, ideally imitating brickwork or other stone surfaces. Sometimes the quality of the imitation is such that when finished finishing it cannot be distinguished from real brick by texture and color. Well, if ready-made tiles or panels do not fit into the family budget, then it is quite possible to use one of the more economical ways, and decorate the wall using affordable materials.

One of the most fashionable and modern trends Interior design can be called decoration with materials that imitate brickwork. Premises decorated in the Loft style look stylish, catchy and extravagant, and most profitable solution To create a similar effect, use special brick-like tiles that can decorate any type of room and give an unusual look to furnishings.

Application

Interior tiles can be used to decorate:

Living room

• Hallways and corridors

  Interior items

  Stoves and fireplaces

Varieties

High-quality tiles, which after laying on the wall are really difficult to distinguish from bricks, are made from natural ceramics and artificial stone.

Most of all, the condition of external similarity with real masonry satisfies tile:

Ceramic

Made from natural fusible clay using the same technology as the facial ceramic brick, therefore, decorating rooms with such tiles creates the complete illusion of real brick walls. Suitable for decorating any vertical surfaces in dry and wet areas, fireplace linings and any design solutions with Loft style. Color variations can be varied - from an almost ideal white shade to any natural, as well as deep dark tones and their combinations.

Clinker

Clinker tiles are a stronger and more durable type of ceramic tile. Special strength characteristics are achieved through the use of refractory clays as raw materials with the addition of metal oxides: aluminum, iron, calcium and magnesium, as well as high temperature firing from 1200 to 1300 C. The range of color variations and textures is no less wide. Depending on what visual effect is desired, products are treated with water, sand, rollers and brushes before firing. Clinker is the most reliable and durable facing material of all those presented, and can last almost indefinitely in the interior.

Hand molded

Another subtype of tile, the main advantage and distinctive feature which is a special rough surface with an easily recognizable texture of ancient brick. This effect occurs due to special technology, in which clay raw materials for the future product are manually placed into molds. The color is often uneven with gradient transitions, color mixtures and tan marks to give the appearance of uneven firing. Similar decorative effects are formed during the baking process when coal, powder impurities and oxides are added to the oven. When using such tiles in an interior, it is almost impossible to distinguish them from genuine antique masonry.

Made from artificial stone

In the manufacture of artificial stone products, natural ingredients are used: clay, purified quarry sand and crushed rocks: dolomite, limestone, gypsum. The color is provided by safe pigments, usually of a natural shade, which ensures the final product is very similar to the front brick surface.

Advantages

For façade cladding, the thickness of the brick (especially hollow brick) becomes an advantage, as it provides additional external thermal insulation building. During interior work, this advantage turns into a disadvantage, since the excess volume eats up space without bringing significant benefits in heat conservation. Wall tiles are a more economical and reasonable solution. In addition, it is cheaper, so less raw materials are required for its production, which in turn reduces the cost.

Additional advantages include lower consumption of adhesive solution compared to the cost of classic masonry, which reduces the cost of work.

The work itself is also not difficult, and no special construction preparation is required to complete it.

21624 0

Brick in production construction work has been used for many centuries. It is durable, has low thermal conductivity, and is second only to wood in terms of environmental friendliness.

Brick buildings involuntarily evoke a feeling of reliability and a feeling of trust, so the desire of the owners to decorate the walls of their home with their own hands using decorative imitation of brickwork is quite understandable, especially since the aesthetics of such decoration, both external and internal, despite the apparent unpretentiousness, is undeniable.

Methods for finishing brick surfaces

Decorative imitation of brickwork on walls is performed in the following ways:

• cutting masonry joints on the plastered surface with a grinder with your own hands;
• laying tiles under brick:
• imitating format and color lateral surface one brick;
• imitating a fragment of brickwork made of several bricks.

The best method of decorative finishing “like brick” is the one that allows you to create a functional coating with maximum external resemblance to natural masonry. All three methods of performing this type of finishing work meet the requirements, but cutting seams with a grinder is labor-intensive and generates a large amount of dust, so we will consider the more common methods.

Brick-like tile finishing

To imitate brickwork, tiles are produced, the format of which is approximately equal to the dimensions of the side surface of red brick - 250 x 55 mm. The artistic execution of a product can be varied - from imitation of new brick to almost complete resemblance to an aged material that has lost its original geometry.

Brick-like finishing tiles are made from gypsum, clinker clay, cement-sand mortar with various fillers, polystyrene foam. Depending on the material of the tile, it must be glued using the correct composition. Let's look at finishing methods popular among home craftsmen and materials that most accurately imitate natural masonry.

Brick finish from gypsum tiles

Laying gypsum tiles to perform interior decoration of walls “like brick”, it is used when performing this type of work on artistic cladding is limited by the budget, since the cost of gypsum tiles is low. This method has one more advantage - the ability to make and lay these tiles with your own hands.

Preparing the base and marking the surface of the walls

Removed from the walls old finish, and the surface is leveled, if necessary, to eliminate the need to glue plaster onto a thick layer of glue.

Markings of finishing are made on the walls of the room, suggesting not a continuous “brick-like” cladding, which will give the room a resemblance to a basement, but its occasional use in combination with the finishing of adjacent sections of the walls, made with other materials.

The combination of such cladding with other types of interior decoration can be either systematic or executed without any visible systematicity, chaotically, simulating signs of aging.

Laying gypsum brick tiles

Before you start gluing the tiles, nail the support strip to the wall with dowels. required length, on which its first row will be laid. Laying gypsum tiles “under brick” is done on a regular gypsum putty, which for this type of work is prepared with a thicker consistency than for leveling walls, in portions of 1-2 kg, allowing it to be worked out until the mixture loses its fluidity.

Apply a layer of putty approximately 1 cm thick to the back side of the product with a flat spatula, level it, and then remove excess composition with a comb spatula. The tiles should be glued by pressing them evenly against the wall with the entire surface, without applying significant force, since gypsum is not a strong enough material. Excess putty that protrudes is removed with a screwdriver with a wide blade, then glued next to it next tile.

To maintain a fixed joint width of 1 cm between adjacent tiles and rows, pre-cut wooden retaining strips 1 cm wide are used. Next row should be laid on top of the first with an offset of half the length of the tile, imitating the dressing of the seams of the brickwork. Between rows, clamps are also used to create a seam of a fixed width.

Gypsum tiles are cut with a hacksaw.

Design of seams for plaster finishing

A day after installation, they begin to fill the seams with the same gypsum putty using a narrow spatula. The surface of the seams can be made flat by running a 1 cm wide strip along it, but a more effective imitation of masonry “for jointing”, made using half of a piece of aluminum or plastic tube with a diameter of 10 mm cut lengthwise. This “template” is passed along the solution along the seam and its convex profile is formed.

After the composition has hardened, they carry out the finishing touches with their own hands - remove defects and gloss from the surface with sandpaper. The plaster is then given several days to dry completely until the finish takes on an evenly distributed white color.

Artistic design of gypsum finishing “brick-like”

The seams are painted in two layers with light gray acrylic paint using a flat artistic brush with your own hands. The seam lines may not be perfectly straight, but you shouldn’t go too far into the area of ​​the bricks.

After the seams have dried, acrylic paint is prepared in one or more jars for painting bricks by adding the desired color to the White color. The decorative finishing of the wall, made using alternating bricks of 5-6 shades of the same color, looks especially impressive, but the masonry can be monochromatic. The bricks are painted individually with a flute brush in two layers with a gap of 24 hours between layers.

After drying, the cladding is covered with two layers of matte acrylic varnish to protect the plaster surface from scratches and make everyday maintenance of the finish easier.

Brick-like clinker tiles

Clinker is durable, waterproof, environmentally friendly and perfectly imitates the surface of brickwork, as it is made from natural clay. Thanks to your high performance clinker tiles are used for not only interior but also exterior finishing work. However, the price range of this material does not suit everyone.

What type and color of clinker to choose depends on what kind of brickwork it is decided to imitate when decorating the walls, whether surface zoning will be done and what is the illumination of the room.

Laying clinker “under brick”

After preparing the base, clinker tiles must be glued to a previously prepared surface tile adhesive, the type of which is selected in accordance with the base material and operating conditions of the room. When fitting, cutting products is done with your own hands using a grinder with a dry cutter. Otherwise, the technology for laying clinker is not much different from the work of laying gypsum products.

Making decorative seams with clinker

After the tile adhesive has hardened, work on filling the tile joints begins. Do-it-yourself masking tape is glued along the seams to protect the clinker from contamination with glue, since complete removal of mortar residues from this decorative tiles It will be difficult, and there will be spots on it that will have to be painted over with paint of a suitable color. The joints of imitation masonry are filled with tile adhesive, also using a narrow spatula, and then the joint profile is given the required form. The protective tape is removed immediately after finishing work on filling the seams.

After the mortar in the joints has hardened, the clinker tiles can be coated with a protective layer of acrylic matte varnish, which makes it easy to maintain the cleanliness and aesthetics of the cladding.

For interior decoration of room walls they are used different types materials. They have numerous differences, and are chosen by the owners of apartments or houses in accordance with their desire and choice specific style. An excellent choice for any room is brick-like tiles for interior decoration, which are available in different colors and types. Using several different shades, an interesting and bright coating is formed. The material is in demand among designers, as it allows you to bring to life unique and unusual ideas. Photos of the result are presented in the selection. However, you must use a material that imitates brick very carefully, since it can often spoil a certain style. It is only suitable for some interiors, as it will look ridiculous in a high-tech room. However excellent choice It is considered if several styles are combined in one room.

There are many types of tiles that provide a coating that imitates brickwork. They are formed from various different materials, and also differ in color and appearance.

Regardless of the raw materials used in production, the resulting material has positive parameters:

• long service life due to the fact that the products are usually coated with a special protective layer, ensuring their long service life;
• environmental cleanliness, because facing tiles, intended for interior work, is made exclusively from safe and natural ingredients;
• versatility to perform Finishing work in absolutely any room, regardless of what operating conditions are established;
• resistance to numerous chemicals;
• ease of removing various contaminants from the created coating, which facilitates the process of caring for it;
• excellent appearance allows you to create a finish that fits perfectly into different styles interior;
• has a long service life;
• it is elastic, so it is easy to finish internal or external corners without the need to cut individual elements;
• brick-like tiles are produced for interior decoration in large quantities varieties, so it is chosen best option;
• there is no need to create sheathing or use reinforcing mesh before installation;
• installation of the coating is considered simple and quick, so the work can be done by a person who has no experience in this field.

There are also some downsides to keep in mind. The disadvantages include the fragility of the material, so if transportation or installation is carried out carelessly, there is a high probability of damaging a large number of tiles. Some unscrupulous manufacturers produce materials that are of low quality and overpriced, so you need to choose tiles carefully.

Types of brick tiles for interior decoration

Since internal work is planned, the materials will not be affected by numerous negative atmospheric factors, which include high humidity or a change in temperature, so decorative brick-like tiles used indoors are not resistant to these influences. Photo different tiles are widely presented below, and it is important to decide in advance whether it is necessary to make a complete imitation or whether it is enough to form a coating that vaguely resembles brickwork.

Brick tiles can be presented in the form of solid bricks or several rows. In the second option, simplified and efficient installation is ensured, since the elements are large in size, and when installing them, you only need to follow the staggered laying order. If you use elements presented in the form of individual bricks, then they produce a coating that is practically no different from standard brickwork. In accordance with the materials used in the creation process, varieties are distinguished.

Thus, it is produced wall tiles, imitating brick, from different materials, depending on which its main parameters are determined.

Material selection rules

To get a beautiful coating from this tile, it is important to choose it wisely. It is presented in many types, and they differ not only in the material of production, but also in texture, color and other numerous parameters. Some people argue that the use of material imitating brickwork in residential premises is considered an inappropriate solution, since it spoils the style and interior, however, the proper use of these materials allows you to actually get an unusual and bright finish.

The most common choices are clinker or gypsum tiles, and they can have different colors and textures.

An excellent solution is to use such finishing next to fireplaces or in niches, since it is then presented in the form of an unusual accent. To prevent gloominess in the rooms, it is recommended to choose bright and light colors. Additionally, this finish is usually combined big amount mirrors or lamps located at different levels.

The selection process takes into account the following features:

• the most commonly chosen clinker tile is formed from plastic clay that goes through a firing procedure at a very high temperature, which ensures its high strength;
• it is necessary to make sure that all elements belong to the same batch, since otherwise small differences in individual elements can be seen on the coating;
• it is recommended to find out about the manufacturer in advance, since it must be proven and reliable, and the materials themselves must be produced together with special accompanying documentation confirming their quality;
• it is important that the selected material combines well with other coatings and elements available in the room where it is planned to be installed;
• You should not focus on buying the cheapest option, since it usually does not differ in high quality and attractiveness.

The appearance of the material, which must fit into the interior, is also significant, and photos of different tiles are widely presented in the selection, so you can be sure of an excellent choice.

Dimensions

The brickwork finish is formed from elements of different sizes. The thickness depends on what raw materials are used in the production process. Since clinker tiles are considered the most popular, most often you have to deal with thicknesses ranging from 8 to 14 mm.

The dimensions of the products completely depend on what kind of brick is being imitated. The following varieties are distinguished:

• if a single brick is imitated, then the size is usually 25x6.5 cm;
• if imitated one and a half brick, then the dimensions are 25x7 mm;
• if a view is created double brick, then the dimensions are 25x12 cm.

Manufacturers also often produce tiles with non-standard and unusual sizes. Photos of such products are widely presented below. As a rule, the material is sold in separate boxes, which indicate not only the sizes of the individual parts, but also their quantity.

When calculating required quantity elements is taken into account whether it will be used grout mixture or a continuous coating will be created.

Rules for caring for the resulting coating

Clinker tiles, as well as some other types of tiles that imitate brick, are very popular. They make beautiful and original coatings who need to be properly cared for.

Caring for the coating is actually quite simple, since it is possible to use both dry and wet cleaning, however, in the latter case, only a sponge soaked in water is used, but direct exposure to water is considered unacceptable.

Decorative tiles are wiped with a damp sponge, after which they must be thoroughly dried, for which they are wiped with a suitable dry cloth. An exception is material intended for installation in rooms with high humidity, since it is not afraid of direct contact with water.

If stubborn dirt gets on the coating, care should be taken to remove it promptly, since if it is not removed as quickly as possible, it will be very difficult to cope with this task in the future. This is due to the fact that it is not allowed to influence the coating with various cleaning agents or sponges, which could damage its integrity.

Thus, clinker or other tiles, which in appearance imitate exquisite and unique brickwork, are considered excellent choice for any room. This coating is considered fashionable and original, and also looks great next to fireplaces, columns or other unusual decorative elements.

Such tiles are produced in a large number of types, photos of which can be found below. They differ not only appearance, but also the material of manufacture, manufacturer and cost. When choosing a specific tile, numerous parameters are taken into account to obtain the best option for a particular room. It is important not only to choose it correctly, but also to correctly install it, which will ensure beautiful decoration any room. Additionally, the created coating is provided with proper care.

Video

Review ceramic tiles brick and corner tiles for interior decoration

Photos with examples of interior finishing with brick tiles

Options for using brick-like tiles for interior decoration.

Brick is one of the most traditional for our country building materials. Therefore, such a finishing element as brickwork is widely used to decorate the walls of premises. Designers have long appreciated the wide creative possibilities brick wall decoration: various shapes and colors of this decor help create a very interesting and original interior.

Naturally, such ideas are implemented in different ways, taking into account all the capabilities of the owner, as well as the characteristics of the room being decorated.

Brick wall decor options

Instead of real brick for interior decoration in modern decor Other materials are often used, the structure of which looks very much like a brick surface.

Brick walls can be finished using materials and technologies such as:

• building panels;
• clinker tiles;
• brick wallpaper;
• painting.

The advantage of such materials over real brickwork is that they are much lighter than brick and occupy much less volume.

What type of decor is best to choose to reproduce a brick wall? Let's take a closer look at the most popular options for finishing brick walls. Knowing the features of each of them, you can easily create a unique wall decor at home.

1. Brick-like building panels

Construction panels are a real leader among “bricks”, famous for their strength and water resistance. This finishing material has long conquered the exterior finishing market, and has now found its application in interior spaces.

Such imitation panels are made of plastic. This means that they are not afraid of dust, moisture, mold or rust. In addition, such brick panels are highly resistant to alkalis and acids and are not at all afraid of hot droplets of fat, which is why they are often used in the kitchen.

Advantages:

• ease of fastening;
• light weight;
• perfect appearance;
• minimum prices.

Flaws:

• Some panels require additional sheathing, so this design takes away a certain part usable space.

Brick panels are mounted both horizontally and vertically, so the pattern on them depends on the method of placement. They are mounted on nails, screws or self-tapping screws. Most of these are mounted directly on the wall.

U decorative panels under a brick, each element has its own independent fixation, so an accidentally damaged part of the “bricks” can be replaced in half an hour.

Important: Brick panels are perfect option decor for a balcony, kitchen apron or crowded corridor.

2. Brick tiles

An excellent alternative to brick for wall cladding is clinker tiles. This is an inexpensive and very beautiful analogue, made from raw clay. In terms of its characteristics, laying method and thickness, brick tiles are no different from simple tiles.

4. Decorative brick-like plaster

Imitation of stone brickwork made of plaster looks very impressive and unusual. In addition, it is very easy to do it yourself.

Advantages:

• variety of textures and colors;
• ease of application;
• excellent insulation;
• environmentally friendly material;
• durable and practically maintenance-free.

Flaws:

• may take up useful space;
• low resistance to dirt (attract dust);
• The surface must be very smooth. There should be no noticeable scratches, bumps or depressions.

Decorative brick-like plaster is used to decorate:

• one wall in the room;
• niche or ;
• “bricks” randomly placed on a flat painted wall.

Important: This type of imitation is very popular with creative people, as it provides enormous opportunities for flights of fancy.

5. Painting like brick

A great way to decorate brick walls is by painting. The color for the bricks is selected depending on the style of the room, your mood and individual taste.

Modern interior solutions that use such “ Brick wall" most often belong to one of two styles:

1. Calm and cozy Country requires soft pastel shades"brickwork";
2. “Brickwork” in the Loft style can be done eccentrically and with a special twist using painting.

A great option for “brick” is elastomeric paint. It fills all the cracks formed due to shrinkage of the walls, protects the surface from moisture and strengthens it. For bright and colorful decoration, acrylic and water-based paints. They are applied with brushes different thicknesses, and if you need to create an additional dust-repellent or water-repellent coating, you can take a wide fur roller.

• poor resistance to mechanical damage;
• cracks over time;
• not suitable for uneven walls;
• The color in the jar and on the wall can vary greatly in shade.

Advice: to add realism to a drawing made to look like a brick, you can subtract or add a few millimeters from each brick.