home · Installation · Dacha beautiful roofs of houses. Beautiful roof - modern structures and design ideas for their design (100 photos). Types of roofs for private houses: selecting the optimal slope

Dacha beautiful roofs of houses. Beautiful roof - modern structures and design ideas for their design (100 photos). Types of roofs for private houses: selecting the optimal slope

Everyone knows that the basis of any house is the foundation and walls, but the roof crowns any building. And roofs have a wide variety of different shapes. Although you shouldn’t think that this is just for beauty. Any roof protects our home from rain, snow, winds, and various shapes give not only beautiful view, but also have their own characteristics. To understand the types of roofs, let’s consider what kind there is roof design of a private house photo. With our tips, choosing a roof for your home will be easier than ever.

Roof design for a private house photo

You will immediately understand the distinctive features of the types of roofs, there is nothing complicated about it, besides, the roof of each house is individual, and can undergo a number of changes that distinguish it from the standards.

Flat roof

Pitched roof

Since these roofs are the most common, and various options There are many of them, so let’s look at their variations in more detail.

Pitched roofs are largely determined by the angle of inclination and the location of the slopes to each other and to the base.

Various relating to pitched roofs will be described below.

Shed roof

As the name suggests, these roofs have one slope. They are cost-effective, easy to build even for beginners, convenient and easy to operate. These roofs have lightweight design and look “easy”.

This roof can be classified as a minimalist design. Often such canopy roofs could be seen near hospital buildings, government and municipal institutions. But Australians, trendsetters in this area, successfully use such roofs in residential construction.

A monoslope canopy has significant wind resistance since the slope is small. The slope is quite well cleared of wastewater, snow, and leaves in a natural way.

Gable roof

Habitual, classic shape roofs - this is a gable roof. This is what all the kids draw in their first drawings. It will be more expensive in terms of the amount of materials and a little more difficult to construct relatively single-slope option, but you can make an attic in it.

The design of domestic houses usually assumed external access to the attic using a ladder. Western builders are creating internal access to the attic.

There are some varieties and modifications of gable roofs that have stood out in individual species, a little more complex roof design of a private house photo has, for example, a hip one - it already has 4 slopes.

Hip/half hip roof

This is a roof with 4 slopes, of which 2 end slopes are in the shape of a triangle, starting from the ridge and all the way to the eaves.

If these end slopes do not reach the eaves, then such a roof is called half-hip.

There is also a similar Dutch gable roof, which has small gables.

All these various design features make it possible not only to create a varied design, but also to increase the space under the roof.

Mansard roof

These roofs are similar to gable roofs, they have a sloping appearance, due to the fact that the slopes are not a flat plane, but a broken one. Such roofs have a solid, large appearance, emphasizing the large size of the house. Under it there is usually a whole additional floor, and the windows for the rooms located there are located directly in the roof/on the slopes or on its lower part, or, if there are not snowy areas on the upper part, they then “look” directly into the sky.

Such roofs are more expensive than gable roofs, not only due to the materials, but also the design, and also require more quality materials for building walls, increased insulation, insulation attic floor. Nevertheless, this type of roofing is popular and liked by many.

Roof BONNET (Bonnet)

Roof-bonnet is a type mansard roof in which the lower “broken” part of the slope does not go down almost at a right angle, but is made flatter and closer to parallel ground, and thereby serves as a roof for the veranda.

Multi-gable roof

Very characteristic and complex look roofs They are rarely used and only by connoisseurs of unusualness solely because of the design. In addition, this is an expensive pleasure; you won’t be able to do it yourself without skills. But thanks to it you can organize several attics very beautifully. Most often, such roofs crown hotel buildings.

Hip roof

In another way, we can say that this is a pyramid roof. This roof has 4 slopes, each of which is a triangle. Most often, such roofs have square structures, and it is they who require such a roof shape. The construction of such a roof requires knowledge and skills. Despite the simplicity of the form, building such a roof is not an easy task.

Combined roof

Combination various types roofs in one building can be dictated by 2 cases: either this is done for the sake of economy and practicality, or for the sake of unusualness and beauty roof design of a private house photo. It should be borne in mind that the combination of different types is not a simple process, requiring in-depth knowledge, subtleties, and nuances of combining roofs.

Non-standard roofs

M-shaped roof

One of rare species roofs, since it is used in cases of a specific house design. It looks like 2 combined houses, each with its own roof, but connected by one valley to each other.

Butterfly roof

An unusual and very beautiful roof in the shape of a butterfly. But, like many things that are beautiful, they are not practical. Complex design, expensive design, lack of an attic; in our climate, an additional disadvantage is the accumulation of snow. In general, we advise you to admire the pictures.

Saltbox roof

This type of roof received its name due to its resemblance to cutlery. This type of roof is gable and not symmetrical. One of the slopes is longer and larger than the second. This architecture was given to us by the USA. And they got such a roof due to the fact that over time the house was completed, and the roof was adjusted/added to it.

After purchasing a plot or already during construction, many people think about a beautiful and original roof. Today we will talk about five types of roofs for a private home.

Flat roof for a private house

Cube-shaped houses are becoming increasingly popular around the world. One of the main components of these houses is the flat roof. I would like to note that for such a roof you can use any roofing materials. The coating will not affect the appearance of the building.

Pros: A flat roof is not only beautiful, it can also be used as a terrace.

Cons: The big disadvantage of such roofs is that there is a significant snow load on it. This means that such a roof is not the best option for cities and towns with large amounts of precipitation.

If you install a flat roof, you won't have a loft, which not only serves as storage space, but also helps insulate the home.

Shed roof for a private house

Another modern and nice option roofs are a single-pitched roof covering. Despite its interesting appearance, a pitched roof is rarely used for private houses.


I would like to note that shed roofing is not suitable for one-story houses, because they look poor and unattractive.

  • Shed roofs have a very simple design. Because of this, the cost is one pitched roof small.
  • This roof is very easy to install; you can do it yourself.

  • Shed roofs, like flat roofs, have the disadvantage of a significant snow load. This occurs due to the small angle of inclination.
  • Small selection of roofing materials. This disadvantage is associated with the small angle of inclination.
  • Shed roofs look peculiar, so this roof will not appeal to everyone.

It is worth noting that the roof will not affect the appearance of the entire house. However, it is worth paying attention to the color of the roof and the end strip.

Gable roofs for private houses

Another name is gable. Such roofs are in demand for one-story houses. Because of this, many people think gable roofs tasteless and ugly.


If you figure it out a little, you can make the gable roof original. To do this, you should adhere to one or more rules:

Interesting design. The most common gable roofs do not look original, but if you choose an asymmetrical option for a private house, the entire building will change for the better.

An asymmetrical design can have different angles of inclination, so the roof will look attractive and not stereotyped. Some people install a roof with different lengths slopes, if under one of them, for example, there is a veranda. This option is also original.

Pay attention to the roofing material. On this moment The choice of roofing materials is huge, which means that with its help you can decorate both the roof and the house as a whole.

Enough inexpensive material is soft tiles. If it is of high quality, then the roof of the house will be beautiful and shiny.

  • Uncomplicated design. You can install it yourself if you have experience working with wood.
  • This roof is universal. You can install it anywhere, be it a city or a village, the amount of precipitation does not matter.
  • You will have an attic. If you make a sufficiently large angle of inclination of the slopes, then you can turn the attic into a full-fledged living space.

The only downside is the template, but you already know how to avoid it.

Hip roof for a private house

A hip roof is similar to a gable roof, but its peculiarity is that it has no fronts. These roofs have triangular slopes instead of fronts. Because of this, the roof turns out to be hipped.

Such roofs do not have a particularly original appearance, which is why it is important to choose the right roofing covering.

  • The load on all walls is the same due to the special design.
  • This roof is universal. It is suitable for single-story or multi-storey buildings, as well as regions with high amounts of precipitation.


  • The complex design of the roof will not allow you to install it yourself without proper experience. The price for installing such roofs is higher.
  • It is not possible to arrange a living space underneath it due to the design features.

Mansard roof for private houses

Another very beautiful option is a roof with an attic. The special design ensures large space underneath it. Typically, this place is used to create additional room. This roof is not as beautiful as the ones listed above, but it can be decorated if you change the angle of the rafters.

If you have a balcony, you can make a canopy over it in the form of a sloping mansard roof. This way you will decorate your home. Also pay attention and time to choose roofing.

  • Thanks to this roof, an additional room will appear in the house.
  • Installing a mansard roof is quite simple, despite its impressive appearance.

The only downside is its unusual appearance, which not everyone will like.

To determine which of these five types of roofs suits you best, just look at the photos of beautiful roofs for houses.

Photos of beautiful roofs

In cottages and country houses Today, many types of roofs are used. Each of them has its own characteristics. The roof of a private house performs many functions. A variety of materials are used for its arrangement. Before creating a roof project for a private house, you should consider all the options in order to choose the most optimal one for yourself.

Main types

In construction, many options for roofs of a private house have been developed. The choice of type of form is influenced by the location of the cottage, its total area, the image of the building itself, as well as the preferences of the owners of country real estate.

The roofs of private houses can be flat or pitched. Their difference lies in the slope of the roof surface. If the slope angle is more than 10 degrees, such roofs for private houses are called a pitched surface. Otherwise, the cottage has a flat roof. If everything is simple with this type of roofing, then you should familiarize yourself with the previous type in more detail.

The roofs of private houses (photo below), which have an angle of inclination of the roof plane, have several subtypes.

Simple types of pitched roofs

To the simplest varieties pitched roof include single and double slope types.

Single-pitched types of roofs in private houses are used more often for outbuildings or non-residential premises, for example, for a garage or barn. The development of such an option should take into account the fact of support on the beams of the structure. The walls act as straight guides.

A more popular type of roof for private houses are their gable varieties, an example of which is shown in the photo below. The structure consists of two identical planes, which are supported on a slope load-bearing walls the buildings. Such roofs of private houses resemble a triangle in appearance. The presented type of roofing arrangement is one of the oldest and most frequently used. It can be argued that the triangular shape gable roof has stood the test of time, and the technology of its construction itself has already been worked out to the smallest detail.

Hip roof

In addition to the main types of roofs of private houses built on a slope, there are other forms. They are widely used in construction to create an original image of a building.

The hip structure is characterized by several slopes triangular shape. This configuration is designed exclusively by professionals. Hip species roofs of private houses (photos can be viewed below) are very resistant to wind and precipitation.

This design is endowed with 4 planes that look like a trapezoid. The corners give the shape its name, as they are called hips. The roof of a private house of the presented type remains clean under the influence of unfavorable weather factors, since debris and precipitation are easily blown away from it by gusts of wind. A dormer window will look good in such a roof. Attics are built under it or terraces are arranged.

There are half-hip roofs. With such a design, it is possible to make a full-fledged window in the attic.

Hip roof

For polygonal or square buildings, a hip roof shape is used. All its planes have the shape of triangles converging at one point - the apex. Hip roofs of private houses are shown in the photo below.

There is no ridge in the presented design. It is absolutely symmetrical. This type of roof looks quite practical. The building will have a nice appearance.

Hip roof types of private houses are resistant to strong winds. In the classic version - 4 slopes. However, there are models with a large number of planes.

Other types of roofs

There are many other varieties of shapes.

The multi-gable roof has complex system elements. Only a professional should be allowed to develop such a form.

For mansard type The structure is ideally suited to a broken type of roof. The slopes have a special angle of fracture of the planes. This allows you to maximize the area of ​​the attic for arranging a separate room. The construction of roofs of private houses of the considered form is quite simple. It will allow you to create an additional room in the cottage.

Conical shapes are used in modern construction quite rare. Their purpose is to create a unique, original visual effect. The cottage will immediately be transformed into a medieval castle. You can complement the image with various balconies, verandas or decorative turrets.

Whatever type of roof is chosen, general form it should correspond to the image of the cottage. An inappropriate roof shape will look awkward.

Flat roof

Flat roofs of private houses (see photo below) in modern construction are used in creative design projects for the construction of country buildings.

IN summer time There are many positive aspects to this type of roofing. On a flat surface you can place a pool, create a flower garden or gazebo. It could be game Zone or a recreation area, solarium and other facilities. It all depends on the imagination of the cottage owners.

Roof projects for private houses can have a completely glass roof. This will solve the issue of lighting the upper floor during the daytime. It will be very beautiful to watch the stars here at night.

To prevent water from remaining on such a roof, a private house is equipped with minimum slope this design. Thanks to it, precipitation will not accumulate on a flat surface.

The disadvantage of this design is the lack of attic ventilation. To solve this problem during construction, a distance is left between the thermal insulation and the ceiling.

Despite this feature, flat views the roofs of private houses (photo below) are very attractive for decorating the overall style of the cottage. With their help, many design ideas are brought to life.

Roof slope

In order to correctly slope the roof, you should take into account the characteristics of the roofing materials used to equip the facility. The climatic characteristics in which the building is located also have a significant influence on the indicator.

Metal roofing should have a slope of 16 to 22 degrees. Mineral materials such as asbestos cement, slate and tiles should be laid at a slope of 27 to 45 degrees. Wooden roofs of private houses have a slope of 18 degrees. These include plank, shingle and shingle varieties of material.

Bituminous and resin materials are mounted on structures with a slope angle of 5 to 30 degrees. The considered indicators along with the weight of the material and total load roofs are taken into account when calculating the optimal configuration of the system and the number of its planes.

Metal roofing

The process of building the roof of a private house with your own hands will require a serious, meticulous attitude. When using metal tiles, you must adhere to certain rules and recommendations.

Cut metal sheets allowed only with special scissors. The grinder creates a lot of sparks, which is unsafe for the worker.

If scratches occur on the material, they should be painted over immediately to prevent corrosion.

Building the roof of a private house with your own hands from metal tiles requires walking on it in soft shoes. You can only step on concave areas. They adhere to the sheathing and withstand the load.

The installation work plan presupposes a certain sequence of actions to be performed. Initially, waterproofing is installed on the rafter system. Then the lathing is made with a board pitch of 0.5 m. It is better to lay horizontal elements with a pitch of 0.25 m. Planks with internal corner under valleys and cornice elements.

Start from the lower left corner and bring it to the ridge. At the internal joints, a valley strip is installed, as well as end strips. The final stage is the installation of the ridge and space for the chimney.

Slate roofing

Slate is one of the classic options for roofing. This type of material does not require the installation of a vapor barrier, which reduces the cost of building the roof of a private house with your own hands. The advantage of slate is fire safety.

Its popularity is explained by its low cost and environmental friendliness. The material is resistant to temperature changes, negative influences environment. It is able to create good sound insulation.

Roof service life mineral materials is several decades.

The disadvantages of slate are fragility and heavy weight. However, these features do not reduce its popularity.

Wooden roof

Installing the roof of a private house using wood requires careful treatment of this natural material.

Before installation, all boards are treated special solution, which will increase their durability and fire safety. After installation, they are painted with enamel.

In order not to overdo it with nails, the boards should be laid according to a certain pattern. A nail is driven into the center of the roofing element on top of the board. On the sides, hardware is driven in from below.

If the installation involves laying two layers of roofing, the first one is installed first. The boards of the second row should be centered on the junction of the base elements.

Ondulin roofing

One of the most prominent representatives bituminous materials, which can cover the roof of a private house, is ondulin. This is a very weather-resistant type of roofing. Lightness is also considered its advantage. Ondulin can be installed immediately on the old base.

It has good water resistance and resistance to temperature changes. Fungus and mold do not grow on an ondulin roof, which significantly increases its service life. The sun's rays are also not able to affect the qualities characteristic of this roof.

Ondulin is fastened with special nails at the rate of 20 pieces per 1 sheet of 10 waves. Roofing elements are laid in rows in a checkerboard pattern. It is prohibited to stretch the sheets, otherwise the roof will deform over time and cease to perform its functions.

Ondulin is considered one of the most beneficial materials for self-installation. Its cost is quite reasonable, and the installation process does not require special effort for transporting sheets to the roof. These factors explain the popularity of the material presented.

Starting construction country house, you need to familiarize yourself with all the principles of arranging its roof. There are many types of them. The roof of a private house should be combined with general style buildings, take into account the terrain conditions and the dimensions of the cottage itself. Applying various materials To install a roof, you must follow all the rules for its installation. A properly constructed roof will serve its owners for decades.

February 17, 2017 / / to / from

The roof of any private house has an incredibly important and multidisciplinary task - throughout its entire service life it must protect the home from snow, rain, wind, scorching sun rays And winter frosts. In order to maintain warmth and comfort in the house, the roof must be properly designed, the design and materials must be selected taking into account the nuances of the architectural structure and features climatic conditions. But in addition to a rationally chosen form, reliable materials and high-quality installation, any owner would like to see not only protection of his home from the vagaries of nature, but also an externally attractive building element that decorates the building or brings originality to its image.

Roofing for a private house - a variety of shapes

You have probably already seen many options for roof designs during construction. modern home. The variety of shapes will help you not only decide on the most suitable way to protect the building from weather conditions, but also find your own solution for implementing design ideas to create an original image. Before you start choosing the type of roofing for your own home, it makes sense to familiarize yourself with design features various options for its implementation. If we talk about the global division of roofs into types, the main criteria are:

  • material type;
  • roof slope;
  • type and shape of the structure.

Exactly right choice These three components will help create a truly reliable, durable and durable building coating that can withstand all the nuances of climatic conditions. The main influence on the choice of type of construction will be the weather conditions in a given area - there is no point in constructing a roof with a slight slope in places with a lot of rainfall in winter time(snow will accumulate and subsequently destroy the structure).

The main classification of roofs is based on the shape and number of slopes. A slope is a roof slope of more than ten degrees. Roofs come with one, two and four slopes. There are also more complex structures equipped with combined slopes - multi-tongs and hip roofs. Less common, but still found in the construction of private houses, are domed and conical roofing models. If the roof structure contains several options and shapes, then it is called combined.

So, let’s take a closer look at the options for roofing in private houses. different sizes and forms located in different climatic conditions:

single-slope roofing is the simplest and most cost-effective design that does not require large financial and labor costs for installation;

gable- a roof structure that is no less affordable in cost, which is often used for buildings different shapes(ideal for regions with a lot of snow);

attic roof is an option gable roof with a broken profile (each slope has two levels, the first is flat, the second is falling);

hip roof suitable for buildings with large area. It is able to withstand high wind loads;

a hip roof with an arched slope (like a pagoda) is rare due to the complexity of manufacturing. But the appearance is very attractive and original;

tent- a type of hip roof that is ideal for buildings square shape(the roof consists of four triangles, converging at the tops like a tent);

half-hip roofing is another subspecies hip roof(a slightly more complicated design for a gable roof);

multi-forceps the roof has a rather complex design (suitable for both square and rectangular houses);

vaulted roof - the name speaks for itself - the roof has the shape of a vault (rarely used as the main type of roofing for residential buildings, more often it serves as an addition);

diamond the roof consists of four diamond shapes brought together to the center and is ideal for houses that have a square shape at the base.

In addition to classification by shape, there is a division of roofs into:

  • exploited;
  • unexploited.

The name speaks for itself. Operable roofs include flat roofs, on which you can create a recreation area for fresh air, a sports area, a terrace and even a lawn with plants. Advantage flat roof not only in the simplicity of execution, the minimum amount of materials and time costs, but also in the fact that such a roof will not be torn off even strong wind. Significant disadvantage is the accumulation of sediment on a flat surface without a slope.

IN Lately It’s fashionable to use the roof surface to create real masterpieces landscape design. The high cost of land within the city, the desire to have your own green corner within walking distance, and opportunities also play a role. modern market materials and plants for organizing such oases on the roofs.

If we talk not only about the aesthetic side of using the roof surface, but also the practical one, then the most popular way to create efficient space is the installation solar panels. Energy saving and enough high prices on electricity consumption are pushing many owners of private houses to use alternative energy sources, which are easy to install on the roof itself.

Also, all roof options can be divided into two groups:

  • attics;
  • roofless.

If the distance between the ceiling and the roof surface does not exceed one and a half meters, then this type of roof is considered attic. Typically this space is used for technical needs. A roofless roof is used if there are ideas for using the space under the roof to organize living quarters. In addition, the attic space can be organized in a finished building by adding a second floor.

How to choose a roof slope

According to the type of slope, all roofs are divided into pitched and flat. Slope is the angle of inclination of the slope relative to the horizon line. Most often it is measured in degrees, less often in percentage roof height to span length. For example, a slope of 100% corresponds to 45 degrees.

The main reason for arranging a roof slope is the need to remove precipitation from its surface. If there is no slope at all (less than 1%), then the roof will often leak and cause inconvenience to the owners. And outwardly, this approach to organizing the covering of buildings is more suitable for outbuildings. Although many designers offer such Constructive decisions as original way distinguishing a building from similar houses on the same street.

When choosing a roof slope option, it is considered that the maximum load from fallen snow on the surface is achieved at a slope angle of 30 degrees. In order for such a roof to self-clean (snow naturally rolls down), the slope must be 45 degrees.

In addition to precipitation, gusts of wind also affect the roof. When the slope increases by 20-30%, the wind load on the roof increases 5 times. But even a very slight slope is not an option; the wind can penetrate through the joints of the ceiling and tear down the structure, as they say, from the inside. That is why the design justification for the shape of the roof and its slope must be entrusted to competent specialists who will take into account all the nuances of the weather conditions of a particular area.

In order to determine the magnitude of the slope, specialists use special calculation formulas and graphs. They are easy to find on the Internet. In short, to determine the slope it is necessary to calculate the ratio of the size of the ridge to half the width of the house. After multiplying the resulting number by 100, we get the desired slope value. If we talk about slope, in relation to construction costs, they increase with increasing value of this indicator.

Despite the obvious fact that a pitched roof is more expensive than a flat model, all developers prioritize reliability, durability and structural strength over initial costs. That's why pitched structures roofing is the most popular option for covering a private house. The slope of such a roof will be determined not only by wind and snow load, but also by its aesthetic appearance. In addition, the roof slope is determined by the use of a specific building material.

We select building materials depending on the roof slope

In order for the roof to be reliable protection for the building from any weather conditions, it is necessary when choosing roofing material take into account the angle of inclination of the slope(s):

slate or corrugated asbestos-cement sheets - the coating can be used for roof slopes from 13 to 60 degrees. If the slope is less than 13 degrees, water will enter the joints of the roofing material, significantly reducing the service life of the coating (and slate cannot be classified as a durable material anyway);

ceramic tiles– the slope for this type of coating ranges from 30 to 60 degrees. Laying ceramic tiles with a slope of less than 30 degrees it is possible, but it is necessary to take additional measures to organize ventilation and waterproofing the roof;

metal tiles- one of the most popular materials used in private construction. One of the advantages of this roofing is that the maximum angle of inclination is not standardized, and the minimum is 15 degrees;

corrugated sheet It is rarely used as a permanent material for covering private houses (it is mainly used for outbuildings and garages). The material is laid with a roof slope of 10 degrees (the maximum value is not standardized);

bitumen shingles– Great for unusual roofs with arched shapes. The slope angle must be at least 12 degrees, the maximum value is not limited;

bitumen slate– used infrequently and with a slope of at least 5 degrees. There is also no maximum value, but it is necessary to take into account the angle of inclination to calculate the sheathing - with a slope of 5 to 10 degrees, a continuous flooring is usually installed;

seam steel roofing – used at an inclination angle of 20 degrees (the final figure is not limited).

A special group of roofing materials includes double-glazed windows and sheets of tempered glass, from which part of the roof is often made. Usually this is the canopy of a veranda or greenhouse, less often - a kitchen or living room in a private house. The design certainly turns out to be incredibly attractive in appearance, not to mention the aesthetic features appearance ceilings inside the room, but similar costs architectural solutions will require a lot. Glass can withstand quite large snow and wind loads. Most often it is attached to a metal profile, less often it acts alone.

When choosing a covering to create a roof, you must use simple rule– the denser the structure of the roofing material, the smaller the angle of inclination of the pitched roof should be. If you take into account the angle of the roof slope when choosing a material, you can end up with a durable and strong structure that is ready to withstand various climatic features specific area.

Design and color scheme

Selecting the color of roofing materials in the rulers modern manufacturers construction and finishing materials incredibly wide. You can use color to create a harmonious ensemble of a building and its roof or highlight the roof with a bright, contrasting shade. The only thing you need to decide when choosing color scheme for roofing material - do you want the roof of the house to blend with environment(greenery, mountains, steppes for country houses and other buildings for city apartments) or stood out against the general background of the landscape with brightness and contrast.

If the facade of your house is made in light colors, then a contrastingly dark roof can not only become an original addition to the building’s image, but also make it stand out among other buildings on the street or outside the city, among green plants.

The opposite situation is when the roofing material is selected light tone, and the façade is finished in a dark color, which is rare. This will make your building look more valuable and original, standing out among the many similar private houses built in the neighborhood.

The bright, rich color of the roof will help create a truly unique image of your architectural structure. If your task is to attract attention to a private home, then the colorful color of the roofing material is great way achieving the goal. But in this case, the facade of the building should be made in a neutral tone.