Making a rocking chair, drawings, dimensions. Do-it-yourself homemade rocking chair made of metal and wood: drawings and assembly. How to make a metal pendulum chair - video

Reading time ≈ 10 minutes

Comfortable furniture- This is one of the important components of home interior. Everyone associates a rocking chair with comfort, because it is so nice to sit in it by the fireplace with a cup of tea and relax. This piece of furniture can fit into any style, and also serve as self-decor. You can make a rocking chair from wood yourself; to do this, consider photo examples with drawings and progress of work.

Design Feature

You can swing on the chair anywhere, calming your nerves and relieving stress. This is one of the simplest and available funds for relaxation. You can purchase it at furniture stores, order on the website or make it yourself in a home workshop.

Why is the rocking chair so popular:

At the same time, you can place the chair everywhere: in the bedroom and in home office, and on the terrace country house, and even in the office. How to make a rocking chair with your own hands from wood using photos and drawings will be shown in a video with the progress of the work and detailed instructions.

U wooden structure has its advantages:

The main part of the rocking chair is arc-shaped skis or runners, due to which rhythmic rocking occurs. If the runners are made long, the amplitude and depth of the swing will be large, you can smoothly move from a sitting position to a lying one. And if you assemble it with short runners, the swings will be insignificant, soft and smooth. These chairs are more suitable for older people.

Wooden chair on runners

Types of chairs

Today you can find a huge number of models of wooden rocking chairs of various shapes, sizes, breeds, styles and purposes.

Rocking chairs are:

To make a rocking chair for your dacha with your own hands from plywood, you will need drawings and instructions from experienced craftsmen, as in the video below.

Depending on the type of chair design, there are:

How does rocking happen?

Many people assemble rocking chairs according to ready-made drawings, but the products may not always fit the size of a particular person. Therefore, before starting production, you should understand the kinematics of this product:

• If a person stands upright, the center of gravity (CG) of the body is between the lower back and the sacrum inside the spinal column. If a person is in a sitting position, the CG shifts slightly forward and down. In rocking products, the overall CG is always shifted back and down to its original position. In this case, there is a slight error in the projection of the main center of gravity in relation to the supporting surface (floor, soil, etc.), which can be corrected at the end during balancing.
• The stability of the structure is most affected by the displacement of the overall CG relative to the vertical central axis (CO). If the CO coincides with the COG, this is a state of free balance, which is impossible to achieve in a rocking chair. If the center of gravity is greater than the center of gravity, there is a high probability of tipping backwards. It is necessary that the central center is 450 mm or more higher than the central central point (recommended excess is 600-700 mm).

In other words, the overall center of gravity of the rocking chair should be shifted from the seat to an angle intermediate between the back and the seat. The supporting legs are two arched strips, thanks to which smooth swinging is possible. The amplitude depends on the length of the runners.

How to choose material and design

Modern models of rocking chairs are made from various materials, each of which has its own characteristics:

To make a rocking chair from solid wood, it is best to use coniferous species: larch, pine, alder or spruce. The density and weight of such wood are low, which is very convenient when working with the material.

Tips from the experts:

Assembly steps

Modern furniture manufacturers are ready to offer a huge range of models various forms, colors, styles and materials. However, if you have the time and desire to independently assemble a home rocking chair, you should safely purchase everything necessary materials and get to work.

The simplest model

Tools and materials:

1. Screwdriver or drill.
2. Tape measure for measurements.
3. Self-tapping screws.
4. Special wood glue.
5. Electric jigsaw.
6. Thick cardboard for patterns.
7. Sandpaper for sanding.
8. Sheet of plywood.

Step-by-step instruction:

How to make a rocking chair with your own hands is shown in the video master class with detailed step-by-step instructions.

Rocking chair with curved skis

For assembly you will need:

1. Tape measure for measurements.
2. A simple pencil.
3. Graph paper.
4. Screwdriver.
5. Electric jigsaw for working with wood.
6. Sander.
7. Metal confirmants.
8. Wood board for cutting skis 300/20/4 centimeters.
9. Board for frame 300/10/2 cm.

Country chair with curved skis

Step-by-step assembly instructions:

In most cases, additional balancing of the product will be required so that the chair does not cause inconvenience when rocking, sitting down and standing up.

How to balance a swing structure:

A rocking chair will always remain a desirable piece of furniture, because it is so pleasant to sit in it and forget about all the problems. It is not at all necessary to spend a lot of money on a purchase; you can make such a product yourself. And ready-made instructions and drawings will help with this.

Some pieces of furniture can hardly be called necessary. But after a hand-made rocking chair appears in the house, the inhabitants will be surprised how they could manage without such a pleasant device before.

They make rocking chairs like modern ones available materials: plastic, cardboard, and traditional ones - wood, rattan, metal. Giving preference to metal corrugated pipes (i.e. steel pipes with oval, round or rectangular shape section), the master receives a product that has a number of advantages. Furniture made from such raw materials is lighter, stronger and, as a rule, inexpensive. After all, to create furnishings, remnants of materials that remain after other work are often used.

Simple rocking chair from the designer

This master class is for those who know how to weld metal. Minimalism has been in fashion for a long time. Try making a simple yet distinctive rocking chair. Pay attention to the work of Belgian designer Muller Vann Severen. His works are distinguished by geometry, simplicity and functionality.

The frame of the rocking chair is made of steel tube, and thick textiles are used for the seat. The choice of color is limited only by your imagination. Such furniture can be placed in an ultra-modern apartment, put on a loggia, or create a comfortable corner for relaxation near a country house.

Prepare materials for work

First of all, you should prepare existing or specially purchase metal pipes that will become the base of the rocking chair. A round or oval profile with a diameter of at least 2 cm is best suited. In addition, you will need a piece of durable (preferably with high content cotton) material 120x130 cm in order to sew a sling seat. You should also have on hand:

• Metal welding machine.
• Eye and hand protection.
• Grinder with cutting and grinding attachments.
• Bending device metal pipes(pipe bender).
• Primer for metal.
• Paint (color of your choice) on metal.
• Magnetic angle for welding.
• Tape measure, pencil.
• Sewing machine.

Before you start creating a chair, you will need to select or cut the necessary blanks from the pipe:

• 4 parts (A) 65 cm long;
• 2 elements (B) 26.8 cm each;
• 2 parts (C) 86.7 cm long;
• 2 elements (D) each 60 cm;
• 2 parts (E) 89.6 cm each.

Scheme with letter designations details will help to imagine the design and method of arrangement of all workpieces.

If necessary, you can change the given size of the chair to your own, proportionally increasing/decreasing all parameters. Be careful when creating a product bigger size, choose a profile pipe of a larger diameter so that the base can withstand a greater load.

Description of work

1. Prepare the ends of the steel pieces so that they fit snugly together when joined. Using a grinder and a sanding attachment, make rounded notches in the indicated places:

• on steel rods A, cut and sand both ends;
• on parts B, make notches on one side only;
• On each rod C, sand one end in this manner.

Attention! When welding parts, be sure to place them on flat surface(on big table or on the floor) to avoid misalignment of connections.

1. As indicated in the photo below, assemble the side parts of the chair first. Using a magnetic welding square, make sure all parts are 90 degrees to each other. When welding, to ensure that the angle is not broken, you can also use any cinder block as a template.
2. When the two sides are completely ready, attach two front and two back parts A to them.
3. Now you need to give the desired bend to the chair runners (E). If you have a pipe bender at your disposal, then the task seems simple. If there is no special equipment, look for suitable device. You can find some clever ideas online. For example, the solution could be a forked tree trunk and an additional metal rod (thin and solid, not a pipe). Place the rod between the trunks, put the part on it, slowly pressing on the free end of the pipe, give it shape. Do the work carefully, the bend of both parts should be as similar as possible.
4. Solder the ends of the curved pieces (E) to the chair legs. That's it the hard part work is completed.
5. Use a grinder with a sanding attachment to clean the joints so that the joints are neat, smooth, and without dangerous sharp edges.
6. Clean the frame with a sponge soaked in soapy water.

For further processing, it would be good to hang the frame, then all metal parts will be processed equally.

1. First, cover a clean, dry frame with two or three coats of primer. Each subsequent layer should be applied only after 24 hours when the previous one has completely dried.
2. Color as desired metal base paint color of your choice or cover with 1-2 layers of matte varnish.

Entrust the making of the cover to a person who knows how to operate a sewing machine. Instead of new fabric, you can take an old blanket, then the fabric does not have to be folded in half.

1. Fold a piece of prepared fabric 120 cm wide and about 130 cm long to make a rectangle 60x130 cm. Sew the two long sides to make a sleeve. Turn it inside out. Fold the edges of the sleeve inward and sew them up as well. Such careful work will extend the life of the fabric part of the rocking chair.
2. If you can position the product as shown in the photo, sew the chair onto the frame with a machine. Otherwise, try to do this work manually as efficiently as possible.

That's all, your rocking chair made from pipes with your own hands turned out to be no worse than a designer one.

Chair made of polypropylene pipes

A rocking chair is easy to build from polypropylene pipes small diameter. If you select all the necessary parts, the work will not take too much time.

Materials and tools

To assemble the chair you will need:

• Polypropylene pipe with a diameter of 25 mm for load-bearing parts.
• Polypropylene pipe with a diameter of 20 mm for transverse elements.
• Drill with a thick drill bit.
• Apparatus for welding polypropylene pipes.
• Metal reinforcement with a cross-section of about 14-16 mm will be located inside the entire structure, giving it stability and rigidity.
• 8 fittings for triple connection of pipes of suitable diameter.
• 2 fittings for 90 degree corner connection.
• 6 fittings for 45 degree corner connection.
• Sand or a heat gun and a plug for a pipe with a diameter of 2 cm.
• Tape measure, pencil.

Cut a pipe with a diameter of 2.5 cm into pieces (2 identical) of each size:

• 5 cm – lower parts of the side support;
• 40 cm – parts of the side support;
• 51 cm – parts of the side support;
• 62 cm – parts of the side support;
• 18 cm – upper parts of the side support;
• 22 cm – parts of the side support that need to be given a rounded shape;
• 220 cm - runners that need to be given a rounded shape.

From a pipe with a cross-section of 2 cm, prepare 18 blanks 60-65 cm long for the crossbars.

Description of work

1. First of all, it is necessary to give the runners and the upper parts of the base a rounded shape. When doing this work, you should try to make paired parts as similar as possible.

A plastic pipe can be given any shape by heating the bend. But when heated, plastic releases toxic substances. Most in safe ways is the application special hair dryer or hot sand. Heat the sand in the oven to 95-130 degrees. Close one end of the pipe with a plug. Using a metal funnel, fill the tube with sand. Give the required form, leave to cool.

When performing work involving heating plastic, use respiratory protection and stay in a ventilated area!

1. Assemble the side parts of the chair by placing metal fittings inside. The assembly procedure is shown in the diagram below.
2. On both parts, make markings for the crossbars.
3. Drill holes up to 2 cm in diameter in these places.
4. Place the reinforcement in the cross members so that the ends protrude 3-4 cm.
5. Having placed the ends of the reinforcement in the holes, attach the transverse parts and solder them using special equipment.
6. Insert the ends of large arcs into the outer tees and solder them.
7. Use the remains of the pipe to make additional reinforcements for the chair. Using a tape measure, determine the required length of the parts. Cut them off. Weld one end of each to the tee, the other to the arc.

All that remains is to sew a cover on the foam mattress and place it, securing it to the frame with ribbon ties.

A DIY rocking chair made by yourself will cost many craftsmen less than a store-bought item. Self-made furniture will be of higher quality and more environmentally friendly; you can think through your own design and construction concept. A rocking chair will be a successful addition to the interior design of a room, a device that will calm you down, give you a good mood for work, and relax you. This product will also become indispensable when rocking a child. For the baby himself, such a chair is a real swing.

If a person has nothing to do with carpentry, then a natural question arises: how to make a rocking chair with your own hands? Initially, you should decide on the type of rocking chair; there are several of them. There are different types regarding design features:

• A rocking chair that has radius runners. This model is classic and most popular. It has a low landing, since on rounded “radii” it is very difficult to maintain balance when swinging.

• Chair with runners of variable curvature. In this case, the “radii” do not represent part of the roundness, which means the swing can have a large amplitude. In this case, use will be safer and more comfortable.

• Armchair nirvana. There are two subtypes: elliptical and spring. The first is considered unsafe, as capsizing often occurs, but the swing is soft and smooth. Spring models are more suitable for widespread use, but making a rocking chair with your own hands such an upgrade requires skill and experience.

• Rocking chairs 3 in 1. All three modes are presented here: chair, rocking chair, lounger. Depending on the degree of reclining of the structure, the position of the body is determined. Multifunctional furniture, but large.

The presented design options can be made from almost any material: wood, metal, wicker, rattan. The seat can be hard, soft or a combination. Materials can be combined, and in some models it is even necessary. Thanks to photos on the Internet, you can choose the product model you like.

Wicker model

Making furniture from wicker or rattan with your own hands is quite difficult. Rattan is expensive material, but a product made from it has a long service life, and the body is more resistant to mechanical stress. The same cannot be said about the vine, but it is more accessible and pliable to work with.

To create original wicker furniture, you can watch the master class. Such instructions will be quite sufficient to implement the project. First, the material is prepared:

1. Rattan cannot be collected by yourself - it is a tough vine that grows in certain areas of America. The vine is harvested independently: branches are collected throughout the year. Length and thickness may vary. When the vine is collected, it is placed vertically outside to dry.

2. Processing of rods involves stripping. The branches are placed in a bath of warm water, where the material should spend about 12 hours. The branches will become elastic. When each twig bends well, you can remove the bark from them.

3. To continue working, you need to give each element the appropriate form. Thick branches are fixed in clamps in the appropriate position, and thin branches are divided into several parts, called shreds, using a splitter.

4. Each shank must be passed through a press so that they become flat and suitable for weaving.

5. The prepared vine is placed in a dryer for three days, where the shape of each element of the future product is permanently fixed. Only from such a vine can a rocking chair be made.

The next stage will be the manufacturing itself:

1. First, a frame is made from thick branches or wooden planks. The sizes are determined independently. All parts are fixed with nails or wire. The item is placed in the dryer for several days.

2. Braiding consists of covering the back and seat with tires. Furniture glue is applied to the body, which will serve additional connection. The shanks themselves braid the sheathing rods in a checkerboard pattern.

3. When the body is ready, the runners are attached and the product is tested. The chair needs to be slightly rocked; if this process proceeds easily, and the chair itself does not tip over when rocked, then the center of gravity is determined correctly.

4. Last step– opening the vine with furniture varnish.

The made rocking chair can be used in the country house, veranda, balcony, garden, hallway. In addition to the positive feelings while using this piece of furniture, this element will become a wonderful authentic design decoration.

On video: making a fully wicker rocking chair

Wooden rocking chair

Making a rocking chair from wood with your own hands is quite simple, the main thing is to make the appropriate preparation. If this is the first time such work is being done, a master class will help with this. . First we prepare the tools:

• wood hacksaws, jigsaw;
• sanding machine or sandpaper;
• screwdriver;
• set of drills;
• measuring tape;
• hammer;
• putty knife;
• level;
• construction corner;
• brushes, pencil.

Preparation of the material is also important. A wooden rocking chair is made partly from plywood. It is better to choose the remaining wooden parts from an elastic material. It would be great if it were flannel.

After collecting tools and material, you can begin to work. Initially, a drawing of a rocking chair is made in accordance with the parameters of the future product. The diagram is an exact copy, but on a reduced scale:

1. You need to cut out the side elements from plywood with your own hands, which are semicircular bases with grooves for flannel. A jigsaw, wood saws and a sander will come in handy here.

2. Flannels are prepared; you can make them from plywood with your own hands, but provided that the plywood is at least 30 millimeters thick and flexible in its base.

3. The side parts made of plywood are connected to each other using 30x50x600 mm bars. Crossbars (flannels) are attached to the frame from above using a screwdriver at a distance of 2-3 cm from each other.

4. We attach the flannel to the frame; for this we use a screwdriver.

5. The plywood rocking chair is awaiting finishing. Places where flannel is attached to the sidewalls are covered with putty. When the putty has dried, you can coat the product with wood varnish.

A rocking chair made of plywood can be additionally equipped with other elements. For example, you can make the seat soft. To do this, a foam rubber base is laid on a wooden base, on top of which the fabric is laid.

On video: how to make a rocking chair out of wood.

Metal chair

There is another class of product - metal rocking chairs. Not every master will be able to make such a design, since this requires more serious equipment and skill. Although, it’s worth trying to make a rocking chair out of metal with your own hands. This can be done by looking at the photos, or by watching the master class.

To work we need the following components:

• steel rods;
• galvanizing;
• steel corners;
• welding machine;
• drill with special drills;
• Bulgarian.

Often, arcs for runners are made from profile pipe, and corners are cut out from the profile itself, which will serve as fasteners. From profiled metal sheet You can make all the necessary elements to create such a design:

1. First, drawings are made according to the product design. To do this, you can take a ready-made chair and transfer this sketch, but also think about a way to attach the rounded runners.

2. Steel rods are cut into 1 meter lengths. After this, the frame is welded, to which the rods will be welded. The distance between them is about 1 centimeter. The metal curls into an oval.

3. After this, the master must attach the seat to the oval base. The seat itself is made of galvanized steel. Fastening is carried out using bolts, and holes for them are made using a drill.

4. The final stage will be painting and sanding the sharp parts.

If we compare the operating conditions of wicker, metal and wooden furniture, then the most universal option is wicker. It does not damage the floor surface, is easy to move, and can be used in any room or outdoors.

You can decorate such a piece of furniture with textiles, in particular decorative pillows, quilted bedspreads, and warm blankets. Thus, a note of comfort and coziness is introduced into the overall idea.

A rocking chair is always associated with a quiet, peaceful evening dedicated only to relaxation.

Of course, you can use it at any time of the day, but you won’t be able to relax the way rhythmic and rocking movements allow you to do anywhere else.

That is why this piece of furniture today can be found not only in the garden, but also in reputable offices. Moreover, many companies equip break rooms with them.

A rocking chair allows you to relax not only the body, but also the brain.

Scientists have long proven that rhythmic, repetitive movements, such as walking or rocking, help you calm down, concentrate, and put your thoughts in order.

The most difficult tasks are solved much easier in such an environment.

If you know at the dacha, then a high-quality, fresh lawn will always be a source of pride and admiration for your guests. Details in the article.

Sunny and varied astilbe: planting and care open ground depending on the plant variety. What are the different types of astilbe?

Ideal choice for a summer residence

A mandatory part of any recreation area on the site. The most popular models are made from wicker, artificial and natural rattan and forged.

Their advantages:

• beautiful appearance;
• strength;
• resistance to moisture and ultraviolet radiation;
• durability.

Of course, it is in the garden that a rocking chair is most appropriate. It can be installed in a gazebo, on or open veranda. Models made from natural materials fit harmoniously into any landscape design.

They look beautiful and bright on modern estates Garden swing on runners made of metal and textile. For areas with log houses or timber buildings, wicker or solid wood furniture is more suitable.

If the design of your dacha is dominated by buildings and decorative elements made of stone, you should pay attention to artistic forging or cold bending.

Unusual design solutions can be a striking accent in the landscape. These are rocking chairs for two, or original beds that can easily replace the usual chaise lounges.

Variety of options

The history of the rocking chair goes back a little more than two centuries. And this wonderful idea belongs to a talented person, inventor and politician - Benjamin Franklin.

But in Europe it became famous and widespread only in the middle of the 19th century. Today, models on skids are popular. It is precisely these rocking chairs that can be found on the pages of classics describing the life of the aristocracy and in modern gardens.

Relatively recently, it appeared completely new design. Sliding rocking chairs without runners. They are ideal for interiors with delicate flooring.

The materials from which such furniture can be made are amazingly diverse:

1. It can be hard wood.Such chairs attract with their massiveness and reliability, while the variety of shapes and design solutions is limitless. It is among the wooden models that you can find both golden classics and avant-garde.
2. Rattan and wicker– traditional material for making rocking chairs. Their distinctive feature is lightness and delicacy. Today, wicker furniture can be made from artificial material. It is practically no different from models made of willow or grapevine or rattan, but is not afraid of moisture.
3. Metal– the material is plastic, but heavy. Forged furniture always looks luxurious. But, the weight of such products is significant. That is why, even in the garden, it is better to use them only on stone or concrete areas. Metal runners will sink into the ground and damage the lawn turf, wooden boards they also leave noticeable marks.
4. Gaining popularity today plastic models. They are durable, resistant to any weather conditions and have a bright and modern design. Equally important is the fact that models made from this material are the most affordable.

Level hands and desire

You can also make a rocking chair with your own hands. This will require, first of all, desire and a little time.

The most popular materials self-made such furniture - wood, plywood and metal. What exactly to choose, each home master decides for himself. It depends on the availability of material and the ability to work with it.

Photo selection with ready-made rocking chairs that you can make yourself:

We use wood and plywood

This is perhaps the simplest and most affordable option. To work, you will need tools that almost every home craftsman has.

The photo shows a drawing of a plywood rocking chair

You can watch how to make a rocking chair with your own hands from wood and plywood using only an axe, a plane and a saw in the presented video, but such work requires extensive experience in woodworking. This video is the first part of a whole series of instructions. In any case, this is a quality and real experience from a craftsman who can really show you how to make this piece of furniture yourself.

If you are not used to getting by only hand tools, then for work you need to prepare:

• jigsaw;
• screwdriver;
• screws and drills of different diameters;
• sandpaper of different grits for processing finished parts.

The easiest way to make a rocking chair out of wood with your own hands is use an old but durable chair. Its legs are shortened, and the resulting structure is mounted on hardwood runners.

To make it new and non-standard appearance it can be braided with leather or plastic tapes or sew an unusual cover.

More interesting models The easiest way to make it at home is from plywood with a thickness of at least 15 mm. General idea quite simple. The sidewalls are cut out of the sheets according to a pre-calculated pattern. For example, it could be like this:

Cutting out the sides

The edges of the plywood are carefully processed. The two parts are connected to each other by three bars 30x50x600mm.

The upper part is laid out with thin boards or slats of plywood with dimensions of 10x50x600 mm (the length can be longer if the slats need to protrude beyond the edge of the sidewalls), which are attached to the end with self-tapping screws.

To avoid cracking and delamination of plywood, it is recommended to pre-drill it at the fastening points with a small-diameter drill.

It is also worth making recesses in the facing strips so that the heads of the hardware are recessed.

If desired, they can be hidden with special plugs to match the wood or putty.

After assembly, the wood can be tinted and varnished or painted in any color.

Metal chair

Metal is a difficult material to process. And if there are no forging skills or equipment for making bent elements, then only simple models chairs, but they can be no less interesting.

First of all, a metal frame is made from a corner, pipe or profile.

After this, all parts are coated with an anti-corrosion compound. Hammer paints look very nice. What will it be decorative finishing- depends on the desire and imagination of the master.

For example, the seat may simply be made of wooden planks. Or the model may be soft. For this purpose, the seat can be braided with a regular luggage belt.

Sew pillows for the back and seat and hide everything with a common removable cover. It is also quite easy to braid the metal frame with willow vine. To do this, you will need the most basic knowledge of wicker weaving, which can be found on the Internet.

Your hand is the ruler

Although only two simple options are presented in detail, they can be implemented in different ways. Based on the recommendations given, you can collect wooden chair this type of rocking chair.

In the first video we see drawings for making a rocking chair with your own hands:

On the second there are tips and assembly instructions:

As you can see, in this master class more simple form sidewalls, but special attention is paid to design. Such a chair will look luxurious not only in the garden, but also in the office.

Experiment is the engine of evolution

By experimenting with the base of the frame, other models can be made using a similar principle. For example, with armrests.

If desired, it can be a whole furniture group for two persons. This model not only looks very original, but will also allow you to relax in pleasant company.

Armchair for two persons

Moreover, all you need is a little imagination and the usual rocking chair turns into a comfortable couch with an awning. You can relax on it in any heat. And if you equip it with a canopy made of mosquito net, then sleep on summer nights in the fresh air.

No less interesting and unusual are the ideas of home craftsmen for models on metal frame. They can be openwork and almost weightless.

Or simple, concise and modern.

To make such a model you will need welding and a pipe bender. Its design is extremely simple. And the seats can be either wicker or sewn from dense material.

You can also make a rocking chair in a classic style from metal pipes.

Rocking chair in classic style

No less interesting is the model in the patchwork style, in which the seat is based on metal ring. This chair is ideal for a country style cottage.

Rocking chair in country style

Making a rocking chair with your own hands is not just about creating an exclusive item, but an opportunity to make furniture that will be comfortable for you and will suit the design of your site. This is a great chance to show imagination and creativity.

Making a rocking chair with your own hands is one of the ways to decorate a recreation area in a living space or personal plot. At home, such a convenient and practical piece of furniture is especially popular and in demand.

How to choose a rocking chair in a store

In the manufacture of such interior items, a wide variety of materials are used, including natural wood, reliable metal and durable modern plastic. The most common furniture is from Italian manufacturers, the design of which is characterized by the presence of arc supports installed on both sides.

Such The special feature of the chair allows you to swing on it. Less common are models that have a solid rounded base. Another feature of the rocking chair is the presence of a comfortable backrest and armrests, and some models have a comfortable footrest.

Dimensions vary depending on the application, and all models can be divided into home, street or country and garden and office. Classic version presented by relatively light, simple in shape and affordable garden models. Basketry It is not advisable to operate it outdoors for a long time. Natural materials such as wicker or rattan quickly become unusable as a result of contact with direct sun rays.

For outdoor use, experts recommend giving preference to rocking chairs made from the most resistant materials such as metal, plastic and synthetic fabrics. The design of furniture for home use can be selected depending on the interior features of the room. Besides everything else, all types are divided into children's and adult models. The first option has small dimensions and is more often presented in game form, so it may look like a rocking horse, dog or bird.

Master class on making a rocking chair from plywood and wood with your own hands

Homemade, the easiest or simplest product - best option if necessary, save money and get original design. Easiest way to do it yourself wooden product. Simple rocking chairs, chairs and swings made of wood always go very harmoniously with any interior style.

DIY rocking chair: collecting parts (video)

Drawing up drawings with dimensions

You can use a ready-made drawing and, if necessary, make minor modifications to it, or develop an assembly diagram yourself. When choosing the first option, it is recommended to give preference to designs with a small number of connections, due to the need to obtain the most monolithic and reliable product.

The frame base consists of a couple of main parts:

• boomerang-shaped sidewalls;
• fourteen cross bars.

The stops are made from five-centimeter bars with a cross-section of 2.0x4.0 cm.

Standard sizes finished model:

• height – meter;
• length – 1.2 m.
• width – 60 cm.

After the drawing is drawn up, the template is transferred to graph paper, strictly observing the scale. As a rule, creating patterns for the simplest options that have a minimum number of structural elements does not cause difficulties.

Materials and tools

It is assumed that plywood with a thickness of 1.5 cm or more will be used as the main materials to create load-bearing structural elements, represented by side supports and racks. For the manufacture of backrest slats and any decorative elements plywood one centimeter thick is suitable. You may also need connecting bars with a cross section of 30x50 mm, but in a simple model you can do without them.

The most accurate cutting of plywood can be achieved by using an electric jigsaw. Smoothing of plywood ribs is carried out using power tools of the appropriate modification in the form of household grinder or a low-speed drill with a milling attachment. All irregularities can be removed with a fine file or fine sandpaper. Antiseptic compounds are used to treat wood. Assembly is carried out with glue and galvanized self-tapping screws, the heads of which are recessed.

Manufacturing stages

The DIY manufacturing technology is as follows:

• preparing a template for the side parts thick cardboard;
• cutting out plywood parts according to a template;
• processing the ends in the cutting area with sandpaper;
• cutting out transverse plywood strips 60 cm long and 4 cm wide, followed by sanding with sandpaper;
• cutting out stops for cross bars from 2.0 x 4.0 cm timber;
• making markings on each side for installation of thrust bars;
• fastening the thrust bars using wood glue.
• fastening the sidewalls with transverse strips.

The fully finished frame is processed protective compounds. Two layers of stain and furniture varnish give a good result.

How to make a rocking chair from wicker at home

Flexible branches of bird cherry or willow are ideal for weaving. The design of a wicker rocking chair is presented:

• lower bench;
• seat;
• back;
• armrests.

Manufacturing technology:

• preparation of 25 long rods, the diameter of which is 30mm and large quantity thin rods, 5mm thick;
• Thick rods are bent using a jig;
• thin rods secure the frame legs to the crosspiece and frame;
• the leggings are tightened;
• shootouts are established;
• mounted top part backrests;
• seat cross rods are installed;
• armrests are woven from rods;
• the armrests are attached to the arms using nails;
• the upper part of the armrest rods is attached to the side supports;
• preparation of inlaid rods and their installation on the back of the seat.

On final stage All elements of the wicker chair are decorated using decorative weaving from thin cut tape.

How to make a wicker rocking chair with your own hands (video)

Features of making a rocking chair for a summer cottage made of metal

At home, quite often, corrugated pipes or other types of metal are used to make rocking chairs. A metal structure made of metal rods is connected using welding machine or drill and bolts in accordance with the following technology:

• the drawing can be made according to the sample simple chair, the dimensions of which are transferred to scale paper;
• the radius of the planned arc determines the standard swing range of the manufactured structure;
• the basis of the structure is steel rods with a cross-section of 20x20 mm, cut in accordance with the dimensions shown in the drawing;
• Arcs are bent from rods and welded to the legs on a frame assembled in accordance with the drawing;
• rods can be welded at a distance of 5-6 mm, which allows you to obtain the most durable and reliable structure, but requires increased material consumption;
• sheet metal is welded or screwed onto the frame base along the entire length of the seat and backrest;
• All elements of the finished structure are sanded and then primed and painted.

More popular option metal structure is a design based on a bed made of a fully curved sheet metal, fixed on arcs, which are represented by steel or aluminum pipes. Often the metal structure is replaced with a frame based on plastic pipes. The seat bed can be made of durable and reliable tarpaulin.

Other unusual options

A very interesting option is the double rocking chair. This model resembles a sofa and is the best comfortable option for dacha zone recreation.

Required tools:

• electric jigsaw;
• disc sander;
• screwdriver;
• a square with a long measuring ruler;
• roulette;
• hammer;
• spatulas and brushes.

Twelve euroscrews, 5x120 mm in size, and 140 self-tapping screws, 4x45 mm in size, are used as fasteners. During the work you will also need drying oil, wood varnish, putty and an antiseptic solution.

Self-production technology:

• making a drawing and template on a metric grid with subsequent transfer of the outline to plywood;
• cutting plywood blanks from plywood and timber. Production of drawstring ties and side elements from 30 mm thick euro plywood. The side parts are cut out using a jigsaw in strict accordance with the pattern. Cutting three drawers measuring 80x12 cm;
• cutting blank bars to create the surface of the seat and back of the product. To cut 35 elements 120 cm long, bars with a cross section of 5.0x2.5 cm are used;
• sanding all cut parts and removing small chamfers using a grinding machine, after which the end parts of the parts are impregnated with hot drying oil.

The assembly of the structure consists of attracting the drawers to the sidewalls using confirmations. Drilled in planes through holes, and the frame is tightened using Euroscrews. The holes above all installed screws must be filled very carefully and thoroughly. At the final stage of assembly, mandatory treatment with antiseptic solutions and triple coating of the surface of the entire product with a special waterproof varnish are carried out.

Varieties of rocking chairs (video)

Self-assembly Rocking chairs are not only a way to save money cash on purchasing home and country furniture. In the last few years, use in home interior and landscape garden territory pieces of furniture made independently - a tribute to fashion and very original way registration