Starline a39 autostart based on temperature. Alarm A39 is a unique offer from Starline. Maximum permissible current at outputs

The Starline A39 car security system cannot be found in retail sales. It is installed only on new cars in showrooms that cooperate with the manufacturer. Its description is not available on the official Starline website, so A39 owners need to familiarize themselves with the installation and operation features of this auto protection.

Features of Starline A39

The manufacturer offers several options: basic equipment Starline a39 and a39 2can 2lin with modules for connecting via a digital bus.

Both versions have the following technical features:

• reliable protection using a dialog signal code;
• stable operation in conditions of urban radio interference;
• control using two remote controls, one of which has an LCD monitor;
• automatic control of connection loss;
• tilt and impact sensors, signaling when the car is placed on a tow truck;
• authorization using a PIN code;
• auto engine start with various action algorithms;
• monitoring and control using GSM and GPS communications;
• control channels for connecting additional functions: folding mirrors, adjusting the driver’s seat, and more.

Cost of A 39 and its equipment

Since the A39 is only supplied to car dealerships, its cost includes installation. It depends on the specific salon and brand of car, so it is difficult to calculate the final price of the equipment. For those who want to purchase the Starline A39 car alarm separately, official representatives recommend paying attention to the A93 model, which is almost identical. Its price is about 200 dollars (the price is current as of 10/04/18).

The complete set of A39 consists of the following parts:

• main and additional keychain;
• car siren with volume control;
• service key for emergency control and settings;
• central control module;
• transceiver (receiver);
• autostart module with temperature sensor;
• 2CAN and 2LIN module;
• GSM module;
• starline a39 car alarm instructions;
• set of wires and connectors for connection.

Some configurations do not include a siren and hood switches, so you need to purchase them separately.

Advantages and disadvantages of the A39 system

Positive and negative sides car alarms are listed in the table:

Malfunctions specific to the A39

1. Damage to the key fob body.

The material from which the main remote control is made is quite fragile, so owners are advised to purchase a protective case for it immediately after installation. You can replace the key fob with a new one if it breaks service center.

2. False positives.

Many A39 owners complain about frequent alarms going off for no reason. This may be due to the shock sensor being too sensitive. To fix the problem, it is recommended to configure the device using the key fob buttons according to the instructions. With the onset of frost, the sensor may begin to operate more often, so it is recommended to reconfigure it with each change of season.

Connection diagram Starline A39

Anti-theft system intended for professional installation in the cabin. If for some reason the owner needs to install the A39 independently, you can use the instructions for the A93, which are similar.

Reviews about the work of A39. Positive and negative opinions of owners

Owner reviews were taken from the websites AvtoProfi.ru, http://otzovik.com/, www.drive2.ru, irecommend.ru, avtobez.com.

Starline A39 - new generation alarm system

The A39 security system has a large number of features that can satisfy even the most demanding driver. It provides security in several ways:

• from signal interception using dialog code;
• from penetration inside using a shock sensor;
• from transportation on a tow truck using a tilt sensor;
• from forced engine starting using a digital relay.

In addition, the A39 provides high level comfort, allowing auto-start of the engine, monitoring using mobile phone and vehicle location tracking on a free website.

Taking into account all these features, as well as the predominantly stable and reliable operation, we can conclude that this alarm system is modern device capable of providing the best protection vehicle under any conditions. It can be installed on any car, including the most expensive models that require enhanced security.

Instructions for the Starline A39 alarm system

The instructions for the car security system cover the following points:

• general characteristics of the model;
• contents of delivery;
• description of system management options;
• setting up key fobs, setting a personal code;
• engine auto start control;
• programming additional functions;
• work in Slave mode;
• connection diagrams for all alarm elements;
• connection via digital vehicle buses.

If necessary, instead of original instructions You can use the A93 system operating manual, which is completely identical.

New for 2014. Security-telematic complex for car protection with intelligent auto start, unscannable dialog control code, integrated multi-system CAN+LIN, optional GSM/ GPS-interface and 128 -channel noise-proof transceiver with a range of up to 2000 m. Super Slave For a present.
StarLine A39 CAN+LIN is designed specifically for reliable protection of vehicles connected to digital CAN and LIN buses: LADA Granta, LADA Kalina, LADA Kalina ll, LADA Priora.

Available only in car dealerships

Advantages of StarLine A39 CAN+LIN:

START/STOP button. StarLine A39 CAN+LIN is ideally compatible with vehicles equipped with a Start/Stop button.

Integrated CAN+LIN interface supports more than 300 car models, including the latest. The integrated CAN+LIN interface simplifies and speeds up the installation of the alarm system, minimizing interference with the vehicle's electronics.

Thanks to flexible service channels, the StarLine A39 CAN+LIN alarm makes it easier to install and implement additional functions without the use of external components.

Anti-theft functions:

• Connecting a digital wireless blocking relay StarLine R2;
• Connecting a code relay;
• Adding a StarLine GSM/GPS module using just one connector.

Commands in security and alarm modes:

• Control of additional door locks;
• Additional engine blocking (failure simulation);
• Opening the trunk with disabling the standard alarm;
• Hood lock control (closing);
• Turn on the light alarm when connected to alarm.

Comfort features:

• Remote control of pre-heater;
• Automatic installation of seats for the owner;
• Automatic return of the steering column to initial position(folding);

At autostart:

• Disabling the wipers and radio while the autostart is running;
• Turning on heated seats and heated windows while the autostart is running;
• Simulation of signals from “smart” ignition switches;
• The second impulse to turn off the ignition in case of unsuccessful autostart on cars with a Start/Stop button;
• Simulation of the second starter signal.

When turning on the security mode:

• Automatic folding mirrors;
• Automatic hatch closing;
• Light path after turning on the security mode.

A full range of standard and programmable functions provides the car owner with reliable protection and comfort when using the car. security system StarLine A39 CAN+LIN.

Operating instructions for alarm unit software L7 and higher

Equipment:

• central alarm unit
• 1 key fob with two-way communication with LCD
• 1 key fob with two-way communication without LCD
• transceiver
• hood button
• Light-emitting diode
• service button
• set of wires
• engine temperature sensor
• user manual
• User's memo
• blocking relay with block
• siren
• CAN-LIN module
• module for temporarily disabling the standard immobilizer

Specifications:

Maximum permissible current at the outputs:

Thank you for your choice. Please fill out the form. We will definitely contact you within 24 hours.

Fields marked with an asterisk are required.

Advantages of StarLine A39:

START/STOP button. StarLine A39 is ideally compatible with vehicles equipped with a Start/Stop button.

Optional 2CAN interface supports more than 300 car models, including the latest. The 2CAN interface simplifies and speeds up the installation of an alarm system, minimizing interference with the car’s electronics.

Thanks to flexible service channels, the StarLine A39 alarm system allows for easier installation and implementation of additional functions without the use of external components.

Anti-theft functions:

• Connecting a digital wireless blocking relay StarLine R2;
• Connection of StarLine R3 code relay;
• Adding a StarLine GSM/GPS module using just one connector.

Commands in security and alarm modes:

• Control of additional door locks;
• Additional engine blocking (failure simulation);
• Opening the trunk with disabling the standard alarm;
• Hood lock control (closing);
• Turn on the light alarm when connected to an alarm system.

Comfort features:

• Remote control of pre-heater;
• Automatic installation of seats for the owner;
• Automatic return of the steering column to its original position (folding);

At autostart:

• Disabling the wipers and radio while the autostart is running;
• Turning on heated seats and heated windows while the autostart is running;
• Simulation of signals from “smart” ignition switches;
• The second impulse to turn off the ignition in case of unsuccessful autostart on cars with a Start/Stop button;
• Simulation of the second starter signal.

When turning on the security mode:

• Automatic folding mirrors;
• Automatic hatch closing;
• Light path after turning on the security mode.

Specifications:

Maximum permissible current at the outputs:

Equipment:

• Central alarm unit
• 1 key fob with two-way communication with LCD
• 1 key fob with two-way communication without LCD
• Transceiver
• Hood button
• Light-emitting diode
• Service button
• Set of wires
• Engine temperature sensor
• User manual
• User's Memo
• Blocking relay with block
• Siren
• 2CAN module
• Module for temporarily disabling the standard immobilizer

Car alarm Starline A39 2CAN+2LIN with telematics function and GSM communication can be installed in vehicles with an electrical voltage of no more than 18 volts. This means that the use of this model of the anti-theft complex is impossible on motorcycles or “heavy duty” vehicles.

[Hide]

Starline A39 system components

Description of the elements that are included in the delivery package of the Starline A39 2CAN+2LIN signaling device:

• main microprocessor module;
• communicator feedback with screen;
• spare pager, not equipped with a display;
• AAA battery for installation in the main console;
• additional switching relay;
• power block;
• antenna adapter;
• module for bypassing the standard engine blocker;
• a set of cable harnesses for connecting to an alarm system, temperature sensor, power module, as well as CAN and LIN buses;
• a set of wires for connecting to the central locking and other vehicle components;
• GSM module;
• cable for connecting the antenna adapter;
• LED to indicate the status of the car alarm;
• limit switch for installation on the hood with connection cable;
• power unit temperature sensor;
• “Valet” button to enter the service mode for controlling the car security system;
• terminal for connecting a 12 volt power supply circuit;
• diode elements;
• documentation, including a service manual, warranty card and consumer instructions.

The Starline A39 2CAN+2LIN alarm system with auto start does not include a siren and door limit switches; they must be purchased separately.

Components of the Starline A39 2CAN+2LIN anti-theft system

Main functions of Starline A39

Alarm Starline A39 2CAN+2LIN has the function automatic start engine, which can be controlled using a special application installed on a smartphone. This model also provides notification options and the ability to control the security complex through the use of a two-way communication channel. All information about the system status is displayed on the key fob display.

Description of the options that the alarm has:

1. Locking the power unit using the main and additional relays.
2. Protects multiple areas of the vehicle with impact controller as well as limit switches.
3. Silent and sound arming of the car.
4. Notifying the vehicle owner via mobile app or remote control.
5. Possibility of control heating devices, installed normally. We are talking about pre-start heaters for diesel engines.
6. Automatic arming of the car as a result of accidental shutdown of the protection.
7. Ability to work with standard central locking when using the “Slave” mode.
8. Activation of security by an impulse supplied from a shock sensor.
9. Self-diagnosis of all components of the anti-theft system when turning the protection on and off. If faulty zones are detected, information about this is displayed on the communicator with a display.
10. Possibility of additional use of P2 radio relay, as well as P3 code devices from the manufacturer Starline.
11. Alarm protection against power failure. If this happens, the system will keep the engine locked so it will not be possible to start. In addition, the control unit is equipped with non-volatile memory, which stores all information about system activations in security mode.
12. Opportunity additional installation Starline M22 and M32 modules for vehicles equipped with a CAN interface.
13. Availability of the “Anti-robbery” function. With its help, the user can activate the engine blocking if the car has been attacked. The power unit will automatically stop when the intruder leaves the crime scene and is on safe distance from the car owner. This option can be activated secretly.
14. Availability of the “Panic” function. With its help, the siren and optical devices of the car are activated upon command from the key fob. This will scare away possible criminals from the car.

Specifications

Description of the properties and parameters of the Starline A39 security complex:

• data transmission is carried out over a channel with a frequency of 433-434 MHz;
• the radius of operation of the main remote control in the pulse sending mode is no more than 800 m, when receiving them - up to 2 km;
• operating range of the spare device is 15 meters;
• 128 channels are used to control the security complex;
• the temperature range at which Starline A39 performs all options is from -50 to +85 degrees;
• in security mode, the system consumes no more than 20 mA.

Starline A39 output power lines are designed to operate with the following currents:

Basic rules for installing a security system

To install the Starline A39 alarm system with automatic engine start of an old or new model, you need to take into account the recommendations:

1. The microprocessor device is located hidden, in a place least exposed to high temperatures and humidity. The module cannot be placed near air ducts heating system. The unit is equipped with a built-in interior temperature sensor, so this arrangement may lead to incorrect readings.
2. The antenna adapter module is placed as high as possible on the rear window or windshield. The distance between the transceiver and metal surfaces must be at least 5 cm. If the car is equipped with rain and light controllers, the adapter must be placed away from them. In addition, you cannot install the antenna module on the top of the glass if a tint film is applied there - this impairs the reception and transmission of signals.
3. The alarm status LED is placed in a visible place in the cabin, near the windshield. Its location on the instrument panel is allowed.
4. Before installing the system, you should connect all its elements separately from the car and connect them to the battery. This will ensure that the complex is in good working order before installing it on the machine.
5. The siren is located in the engine compartment secretly, in the driest place, not exposed to critically high temperatures. The horn of the device must be placed downwards, this will avoid the accumulation of moisture inside. The power supply line must be equipped safety device at 3 amps.
6. The temperature controller is installed on the engine crankcase or any metal surface adjacent to the cylinder head. The device can be installed in the cooling system pipe. Do not install the sensor near the exhaust manifold, as this will lead to deformation of the regulator body due to exposure to high temperature.
7. Wiring is laid under decorative cladding salon Electrical circuits must not be laid in places where moving mechanisms and components of the car are located.

Installation of the Starline A39 2CAN+2LIN anti-theft system is carried out on a car with a disconnected battery.

How to install a Starline A39 car alarm?

Installation guide for the 2CAN+2LIN system produced by Starline:

1. The battery is disconnected; to do this, the terminal clamp with the negative output must be disconnected from the battery in the engine compartment.
2. A microprocessor device is being installed. It is recommended to install it behind the control combination, this will ensure the shortest possible length of wires. The module is fixed to flat surface using plastic clamps or self-tapping screws.
3. LED is installed.
4. The temperature controller and siren are being installed under the hood.
5. The antenna adapter is placed on inner surface windshield or rear window.
6. “Limit switches” are mounted on the hood, luggage compartment and doors.
7. The -12 volt wire (“ground” or ground) must be connected to the car body; for this you can use any standard bolt. The use of self-tapping screws for fixing to the body is not allowed. A power cable with a cross-section of at least 6 mm2 is connected to the main block of the control unit.

User manual

If you lose the instructions for use of Starline A39 2CAN+2LIN, you can use technical documentation from the alarm more early year release - A93.

Modes

Features of Starline control with 2CAN and 2LIN buses:

1. Before arming the security system, you need to make sure that the ignition is turned off, the handbrake is applied, and all door locks and the hood is locked. Activation is performed by pressing button 1. The siren will sound, the communicator will play a melodic signal, and the security mode indicator will be displayed on its screen.
2. If activation of protection without sound signals is required, then button 1 is pressed for several seconds. Then you need to “click” briefly on key 2. The conditions for enabling the function are similar.
3. Silent security is activated by pressing the first button on the communicator. It is pressed until a melodic sound signal sounds. Then you need to press control 2. The communicator will play one pulse, and the corresponding symbol will appear on its display.
4. The automatic arming function is configured by moving the cursor to the position of the indicator with the inscription “Auto” on the display. When the doors are locked, the user must turn off the ignition and leave the cabin, closing all the locks. 10 seconds after this, the protection will be automatically activated.
5. When arming a car with the engine running, you must make sure that the gearbox selector is in the neutral speed position. While the engine is running, the handbrake lever is raised. Then the user opens the door and presses key 2 on the communicator. The key is removed from the ignition, the driver leaves the cabin and locks all the doors. Then the first control is clicked, this will activate the security.
6. To activate protection without a key fob, use the service key. Using the key to open the car door will trigger the siren. The ignition is turned on and off, between these actions the emergency mode entry button is pressed three times. The driver leaves the car and closes all the locks. After ten seconds, the security mode will be automatically activated.

The ANTIUGON TV channel talked about the initial setup of Starline A39 2CAN+2LIN remote controls and changing the time settings on the key fob.

Setting up the key fob

To use the Starline A39 communicator as a tag, perform the following steps:

1. Button 1 on the remote control is pressed and held. On device led indicator will determine the operating mode. If the light is red, then the alarm is functioning normally; when it is blue, the “Slave” function is enabled.
2. To switch to the desired mode, use key 3; press it briefly. Button 1 must be held down. When switching, the color of the diode will change.
3. To switch to normal mode, press key 2. As confirmation, the LED will light red. Once the selection is made, the first button is released.

The range for calculating RFID pulses is determined by the settings of the microprocessor module. When adjusting parameters, you must follow a certain algorithm. First, the user must go to the programming menu for the unit, and then for the electronic key.

Setting up the Starline A39 communicator with a CAN connection is done as follows:

1. The control panel is switched to radio tag mode.
2. The protection function is disabled. The service mode entry button is pressed eleven times.
3. The key is inserted into the lock and turned to turn on the ignition. The siren should sound 11 times, the side lights of the car will begin to flicker.
4. The first and third keys are pressed simultaneously; there is no need to hold them down. The LED will blink and the remote control will emit a short signal.
5. The buttons are released, then control 1 is held down for two seconds. The key must be held down until diode light bulb will not light up blue. Then you need to simultaneously “click” on buttons 2 and 3, and release the first key. To confirm entering the range programming menu, the communicator will play a melody.
6. To decrease or increase the range, the third and second keys are used, respectively. With each “click” the remote control will emit a beep. When the range value approaches the maximum, a melody will sound. It is recommended to reduce this parameter to a minimum value, this will ensure the most correct operation of the alarm.
7. The user must then move no more than six meters away from the vehicle. The second key is pressed to achieve the most stable communication channel.
8. Button 1 is clicked. The communicator should play a double signal. Then keys 2 and 3 are pressed simultaneously to turn off the ignition system. The range settings will be saved in the memory of the microprocessor module.

The ANTI-THEFT SYSTEMS Live channel talked about changes in keyless entry parameters and the implementation of the A39 2CAN+2LIN function.

Programming functions using a key fob

Guide for setting up Starline A39 options:

1. You enter the main menu. To perform the task with the ignition off, the button to enter the service mode is “clicked” five times.
2. The key turns in the lock. It is necessary to activate the ignition system. In confirmation, the siren will emit five sound pulses, and the communicator will play a melodic signal.
3. Using controls 2 and 3, you can select one of five programming items.
4. Button 3 is pressed and held until a sound pulse is heard. Then she “clicks” again. The first item in the programming menu should appear on the communicator screen.
5. Using buttons 2 and 3, select the required option. To determine the state, briefly press the first key. Then control element 3 is clamped and pressed briefly again after the remote control plays a melodic signal.

Service functions

Features of Starline A39 options settings:

1. To control the condition of the vehicle, battery voltage and interior temperature, use button 3. This will display data on battery operation and other parameters on the remote control screen.
2. The “Search” function is activated by briefly pressing key 4 twice. The remote control will play a melody, and its display will display data regarding the temperature of the power unit. The anti-theft system will indicate the vehicle's location using six light and sound pulses.
3. To temporarily deactivate the warning level of the shock and sensitivity regulator, press the first key on the remote control twice when the protection is on. The car's headlights will blink twice. To turn off the sensor completely, you need to press the first button twice in security mode. The device is reactivated by “clicking” on 1 key.
4. To adjust the sensitivity parameter of the tilt controller, the user presses control 4. First, the button is held until a signal is heard, and then it is “clicked” briefly. Use keys 2 and 3 to select required value. To exit the setup menu, button 4 is pressed for a few seconds and then “clicked” briefly.

Channel “Crossover 159” showed the process of changing the parameters of the option with the Starline A39 2CAN+2LIN alarm system.

Pros and cons of a security system

List of main advantages of the Starline A39 alarm system:

1. Availability of additional functionality that simplifies the use of the complex. This refers to autostart, pre-heating of the engine, etc.
2. Versatility of the security system. Starline A39 can be used on passenger cars and SUVs with diesel or gasoline engines, regardless of the type of gearbox. Also, the use of the “signal signal” is possible on cars equipped with a Start/Stop button.
3. The ability to independently adjust the sensitivity of the shock sensor.
4. Availability of a control system via a mobile application or computer. To do this, the user must register in advance on Starline official website .

Disadvantages of this Starline model:

1. Complicated service manual. If the user is inexperienced and has never set up a car alarm, this task may be difficult.
2. Fragile body of the communicator. If dropped, there is a possibility of damage to the device and its failure. To restore functionality, the communicator will need to be repaired.
3. There may be malfunctions of the anti-theft system at low subzero temperatures. User reviews show that already at -20 degrees the system begins to function incorrectly.
4. There are still defective copies on sale. In the first years of production of these systems, a large number of defects ended up on the shelves of auto stores. The manufacturer Starline recalled all such alarms from the market and replaced them under warranty. But there are stores where there are remnants of a defective batch of the A39 system. There is a high probability that they will not work correctly.
5. To implement all functions, the user will need to additionally purchase and install the appropriate Starline modules.
6. The package includes wires that are too thin and short. This leads to their rapid wear and the need for extension during installation.

Starline A39 2CAN+2LIN anti-theft systems are usually installed in car dealerships, so most of the functions and parameters remain unconfigured.

Download installation and operating instructions for Starline A39 in PDF format

You can download service manuals for installation of Starline A39 2CAN+2LIN with photo connection diagram using the following links:

How much does the Starline A39 alarm cost?

Buy this model Available in different modifications at the following prices:

Video

The Mos-olimp channel showed the process of how the autostart function works on a Kia Sorento with a Starline A39 2CAN+2LIN alarm system installed.

New cars in car dealerships may be equipped with a Starline A39 alarm system, which is not listed in the product lists on the manufacturer’s official website. Therefore, after purchasing a car, we recommend that you familiarize yourself with the features of setting up and operating this anti-theft system.

[Hide]

Equipment

When purchasing an alarm system with auto start Starline A39, the user receives all the kit necessary for installation. Depending on the car model, it may be necessary to purchase additional limit switches and wires for them.

The maximum set includes:

• head unit with microprocessor control;
• main key fob with two-way signal exchange, equipped with a display;
• AAA battery for key fob;
• second key fob (without screen);
• additional switching relay;
• power module;
• transceiver with built-in antenna;
• immobilizer crawler;
• siren (optional);
• wiring harness for connecting power and controlling external light signaling;
• harness for crossing to the head block of the power module and temperature sensor(installed on the engine);
• wiring harness for connection to CAN or LIN buses of the vehicle (optional);
• wiring for connection to the lock control module;
• crossover cable for input circuits:
• main wiring harness (with 10-pin plug);
• antenna cable;
• Starline GSM module;
• indicator diode;
• wire for connecting to the hood limit switch;
• settings button (service);
• engine temperature meter;
• hood limit switch with two screws;
• connecting terminal for supplying voltage - 12 V;
• diodes 1N4007;
• documentation package (warranty card, user manual and instructions).

The antenna unit contains an integrated sensor for detecting impacts or tilts of the car, operating on the principle of a three-axis accelerometer. The use of an integrated sensor simplifies installation and increases the sensitivity of the system.

Main functions

"Signalka" A39 can provide:

• protection against unauthorized engine starting (main and additional relays);
• car interior protection using limit switches and shock and tilt sensors;
• silent and sound arming;
• work with and without a siren in alarm mode;
• automatic switching on when the deactivation button is pressed by mistake;
• sending messages to a key fob or phone;
• work in immobilizer and anti-theft modes;
• automatic engine start;
• engine operation according to turbo timer;
• control of standard autonomous heaters;
• work with standard alarm system in Slave mode;
• activation by a signal from an adjustable shock sensor;
• work together with GSM Starline M22 or M32 external modules with CAN bus support;
• operation with optional built-in GSM unit;
• use in conjunction with an additional Starline R2 radio relay (up to two pieces);
• work with code relay Starline R3.

The operation of the Starline A39 autostart from the standard Kia Optima key fob is demonstrated in a video from the author Mikhail Novikov.

Specifications

The alarm has the following characteristics:

• operating control frequency - 433.05-434.79 MHz;
• number of control channels - 128;
• signal distance from the main key fob - up to 800 m;
• distance for receiving data on the state of the system - up to 2000 m;
• operating radius of the second key fob is no more than 15 m;
• supply voltage - no more than 18 V;
• operating current in standby mode - no higher than 20 mA;
• current when working with a cellular communication module - about 33 mA;
• current during operation of the cellular module and GPS/GLONASS navigation antenna - up to 36 mA

The output circuits of the security complex are designed for the following current values ​​(at a voltage of 12 V):

Protection is carried out by standard fusible elements of the car.

Installation Rules

1. The head unit is placed under the casing dashboard and is fixed with ties or self-tapping screws to the panel frame. When placing the unit in a damp place, it should be installed with the central harness connector facing down. The device should be located at a distance from the air ducts of the microclimate system, since it has a built-in air temperature sensor in the cabin.
2. The antenna should be installed along the top edge windshield at a distance of at least 50 mm from the metal frame of the body. It should be located at a distance from light and rain sensors, since the devices may malfunction. If a darkening strip is applied to the glass or there is a tinting film, then the radius stable operation key fobs may decrease. It is not recommended to mount the antenna module on plastic sheathing interior, as this will disrupt the shock sensor algorithm.
3. A diode indicating the operating modes of the system is mounted on the top of the dashboard or on the trim of the front pillars.
4. The siren is located in the engine compartment at a distance from sources of heat and moisture. It is installed with the horn down, which protects the device from flooding with water. When using a standalone siren, ensure unobstructed access to the switch lock. It is recommended to use an additional fuse in the power circuit, rated for current up to 3 A.
5. To install the engine temperature sensor, it is recommended to use the cooling system pipe or the engine crankcase. The sensor is attached to the pipe with a plastic tie, and to the crankcase with a bolt. When fastening with a bolt or nut, do not allow deformation of the sensor body. It is prohibited to install a temperature meter near the exhaust manifold, as this will lead to its failure.

The location where the siren is installed should be inaccessible through openings on the bottom. Otherwise, an attacker can disable or disable the siren.

How to install?

The general sequence of installation steps is as follows:

1. Connect the -12 Volt wire (black). To provide good contact It is recommended to crimp the cable with a lug and screw it to the standard ground nut on the body. Fastening with self-tapping screws to the body is prohibited.
2. Supply +12 Volt power to the head unit connector using wiring with a cross-section of at least 6 mm². Typically, power wires going to the ignition switch are selected for insertion points.
3. Connect the relay module to the positive wire. It is recommended to power the head unit and relay elements through different circuits, protected by their own fuses.
4. When direct connection unit and module to the battery should be used copper conductor with a cross-section of at least 6 mm² and protect the circuit with a separate fuse with a rating of 30 A. The fuse link is placed as close as possible to the positive terminal of the battery.
5. Connect to the CAN or LIN bus (if necessary).
6. When using a CAN or LIN bus, a separate analog connection to control door locks and exterior lighting.
7. If necessary, connect the ignition input and deactivate the control of this input via the CAN bus.
8. Install an additional relay in the break of one of the circuits to ensure engine operability.
9. Include the limit switches of the doors and hood and trunk lids in the control circuit. It may be necessary to disable CAN bus control.
10. Connect the brake pedal and parking brake lever to the limit switch circuits.
11. Connect the external lighting control circuit to the main unit.
12. Install and connect the siren. It is possible to use a standard horn connected via a relay as a siren.
13. Activate additional channels and connect circuits to them auxiliary equipment(trunk lock or auxiliary heater).
14. Configure the parameters of the ignition support circuit when working with the key removed from the lock (turbo timer mode).
15. Install the sensor on the engine and connect a bypass device to the immobilizer circuit.
16. Install a service button and a diode for monitoring operating modes.
17. Install the module with the antenna and connect it to the unit.
18. Configure the shock sensor operating parameters.
19. Adjust the operating level of the tilt sensor.
20. Install additional GSM communication modules (if necessary).
21. Install optional radio relays and code controller.

After installation, it is necessary to check the functionality of the system and make adjustments.

Self-installation of Starline A39 on cars with a CAN bus is recommended only if you have experience installing such devices. Otherwise there is a risk of withdrawal electronic systems car is out of order.

User manual

The attached instructions cover the following points:

• general information about the scope of delivery;
• connecting the system with detailed diagrams;
• various lock control options;
• connection of lighting equipment, siren;
• activation of additional channels;
• installation and configuration of the immobilizer crawler;
• settings of sensors and additional equipment;
• options for automatic engine start;
• programming of basic parameters;
• setting up additional channels;
• CAN interface control;
• system operation in Slave mode;
• settings of additional key fobs;
• emergency shutdown code programming.

If the original instructions are lost, you can use documentation from. All system settings are identical.

Modes

The Starline A39 security system can operate in several modes:

• service mode of operation, in which programming of functions is performed;
• security mode (silent and with siren);
• autorun mode;
• anti-robbery mode;
• Slave mode (together with the standard security system).

When working in autorun mode, several startup options are possible:

• by alarm;
• based on a signal from a temperature sensor;
• by timer;
• by signal from the key fob.

Setting up the key fob

When using the A39 system with a CAN module, it is possible to enable the Slave mode, which allows you to control the system from a standard key fob. An additional remote control can be used as an identification tag. If, when disarming with an additional remote control, alarm signals turn on (after 30 seconds), then the device must be switched to tag mode.

Keychain tag A39 with designation of elements

To switch the key fob to tag mode you must:

1. Press and hold button 01. The indicator on the key fob allows you to determine the operating mode. If it lights up in red, then the normal operation of the alarm is activated, if it lights up in blue, the Slave mode is activated.
2. Switching to Slave is performed by briefly pressing button 03 (key 01 is held down). The switching will be confirmed by the indicator color changing to blue.
3. To return to normal mode, briefly press key 02, which will be confirmed by the red glow of the diode.
4. After selecting the mode, you can release the 01 key.

The radius of reading the tag signal by the head unit depends on the settings. When setting the range of action, you must follow the sequence of work - first the block is switched to the setting mode, and then the tag.

To make settings on the unit itself and the key fob, you must perform the following sequence of actions:

1. Switch the key fob to tag mode.
2. Disable security and press the setting button 11 times in a row.
3. Turn on the ignition and receive confirmation from the siren (11 short signals) and external lamps (flashing once every two seconds).
4. Simultaneously press buttons 01 and 03 for a short period of time. A sound signal will sound and the blue diode will blink.
5. Release the buttons and press key 01 again for more than two seconds. Pressing should turn on the blue LED.
6. After turning on the diode, briefly press keys 02 or 03 and release 01. The melody serves as confirmation of entering the range setting menu.
7. You can increase or decrease the range by short pressing keys 02 and 03, respectively. When pressed, a short beep will sound. When the limit values ​​are reached, the melody is turned on. In setup mode, a connection check is performed, which is indicated by the red LED turning on.
8. For correct settings, it is recommended to reduce the radius to the minimum value. Then, being at a distance of no more than 6 meters from the car, use button 02 to achieve a stable communication signal.
9. Briefly press the 01 key and wait for two signals from the key fob buzzer.
10. Press buttons 02 and 03 simultaneously and turn off the ignition system. All tag settings are stored in a separate memory of the head unit, independent of the network voltage.

Programming functions using a key fob

All programming parameters are available in the setup tables included with the instruction manual.

To perform programming you need:

1. Enter the main menu. To do this, with the ignition off, press the service options key five times.
2. Turn on the ignition system and receive a confirmation signal from the siren five times and a melodious signal from the key fob buzzer.
3. Use buttons 02 and 03 to select one of five setting items.
4. Long press button 03 and wait for audible confirmation.
5. Briefly press 03. After the key fob buzzer sounds, the first item of the setup menu will be displayed on the screen.
6. Short presses on 02 and 03 to select the required sub-item (function). It is important to remember that to select option number 10 you need to press 03 nine times.
7. By briefly pressing 01, switch on the submenu for selecting the function state.
8. After selecting, press long-term on 03, and then sound signal for a short time. This returns you to the main menu.
9. To completely exit the setting mode, you must turn the key in the lock to the OFF position.

Main key fob and button layout

Advantages and disadvantages

The Starline A39 alarm system is not widely used, so reviews from owners about it are sporadic.

Users note the advantages of the device:

1. Possibility of starting the engine with one button.
2. Possibility of controlling autonomous heaters using additional channels.
3. Possibility of installation on cars of various brands, including those equipped with a stop-start system.
4. Sensitive shock sensor with smooth adjustment.
5. Possibility of programming via computer.
6. Built-in self-diagnosis system. When the alarm is turned on, the units are polled and a signal is sent to the key fob or phone if a malfunction is detected. Inoperative sensors are automatically switched off from the security zone.

But at the same time pay attention to the negative aspects:

1. Incomprehensible user manual.
2. Weak key fob body.
3. Meet false positives and failures to operate low temperatures(below -20ºС).
4. There are defective copies (according to reviews from owners, such systems were replaced under warranty).
5. The need to purchase additional modules (if you purchase a system without CAN+LIN).
6. Short and thin wires in bundles.
7. In most cases, the alarm system is installed in a car dealership, so many parameters remain unprogrammed. When purchasing a car with A39 installed, it is recommended to reconfigure the emergency PIN code.

Price

Average prices for alarms and additional elements:

• basic alarm in the CAN+LIN version - 7,500 rubles;
• GSM M22 module — 5,700 rubles;
• GSM M32 CAN+LIN module — 11,100 rub.