Fiberglass panels for facade. Facade panels for exterior decoration of a house: varieties and installation. Laying insulation materials

Fiberglass - modern material, which serves as the basis for different products. Fiberglass cladding panels deserve special attention. With their help, you can create an original room design and give it exclusive features.

Advantages of fiberglass panels

Such products are suitable for interior and exterior decoration of buildings. They meet high sanitary and hygienic requirements and are safe. High quality available at an affordable price. The cost of facing items is affordable, this is also their serious advantage.

It is necessary to list other advantages of glass plastic panels:

They have waterproof properties;
. are not afraid of mold, corrosion;
. refer to durable products;
. withstands high and low temperatures;
. resistant to chemicals.

Fiberglass panels are lightweight, so there are no problems with transportation. Installing the products is also quite easy. The installation speed of fiberglass panels will be fast, and therefore the installation cost will be low.

Scope of use of fiberglass panels

You can buy fiberglass good quality to use it for different purposes. It is more profitable to purchase ready-made panels that can be immediately used for interior or exterior decoration. They are suitable for installation suspended ceilings, wall cladding, for decorating the facade of a building.

In appearance, fiberglass panels imitate natural stone or other materials, so they look great. The panels can be attached to any surface, and you do not need to have high qualifications to carry out finishing work. The material retains all its properties for decades and does not require repair. Using such panels, you can solve the problem of wall insulation and protect the brick from weathering.

For interior decoration You can buy fiberglass panels in different colors. With their help, it is possible to create a special interior without spending a lot of money. Fiberglass panels imitate uneven surfaces: from raw stones to smooth brickwork. Eat special products L-shaped for finishing joints and corners.

Fiberglass panels are available in a variety of shapes and colors. Such finishing elements have many advantages and are an alternative expensive materials. Fiberglass panels - great choice for finishing a home, commercial premises or other buildings.

Facade panels for exterior finishing houses allow you to make the appearance of the walls presentable, reduce heat loss, and improve sound insulation. Decorative and protective functions panels for facade cladding depend on the material from which they are made. Products can be cement, plastic, porcelain stoneware, metal, etc.

Types and advantages of facade panels

If you have no experience in choosing cladding for facades, then it is best to seek help from a specialist. He should help you choose the right one facing material, which is more suitable for each specific home. Depending on the material of manufacture, panels for facades can be classified as follows:

1. Sandwich panels and thermal plates. Consist of polyurethane foam and other types of materials.
2. Fiber cement products. They are silicate materials with a special decorative coating.
3. Thermoplastic. Consisting of polyester and fiberglass, they are various options coverings.
4. Fiberglass products. Made from fiberglass mixed with special resins.
5. Basement siding. Made from polypropylene and polyvinyl chloride.

Facade panels for the home have their own advantages and disadvantages. They differ in their purpose and quality of coating. When choosing panels, you should pay attention not only to appearance product, but also its physical specifications.

Decorative panels for facade finishing can have a multilayer structure, including a layer of heat insulation.

If the product was manufactured without insulation, then during the finishing process an air gap should remain between the wall and the panel. It is formed by a screen that reduces heat loss. Manufacturers provide panels for facades with the following advantages, regardless of the material of manufacture:

1. Long service life. Performing the cladding function throughout the year.
2. Easy and quick installation.
3. Resistance to moisture, ultraviolet radiation, low temperatures.
4. Lightweight panels for the facade, which does not create a load on the base.
5. The ability to create beautiful modern home exteriors.
6. Additional insulation of the house, protection of “breathing” walls from mold, corrosion, pests, etc.

Choosing the right cladding option is very important in the process of decorating the facade with decorative panels. This will protect the house from humidity, bad weather, and various chemical influences. Before making a purchase, you should always ask the seller about the technical characteristics of the selected material.

What to consider when choosing cladding

Every owner of a country house has a need to choose high-quality cladding that allows them to give the facade a decent appearance. Wood or brick have long given way to façade panels, which are modern version for finishing the facades of private houses.

Before purchasing one or another type of product for facade cladding, you should study the reasons explaining why the material is in demand on the market. Different types of products have not only their own technical characteristics, but also their composition, texture, installation method, decorative properties. Experts highlight the following properties of panels that make these products in demand:

1. Meeting customer requirements through a wide selection of panel types. They can be made from various materials: metal, plastic, wood, etc.
2. Obtaining a decent effect from installation while reducing the labor intensity of work while maximizing the acceleration of the installation process of products.
3. Durability and superior thermal insulation properties products that allow you to retain heat in the house for a long time.
4. Long service life and quick installation facade panels, accessible to a beginner.
5. Production of products for finishing facades from environmentally friendly materials, some of which have made a real revolution in the market for cladding products.

So that the buyer can verify environmental cleanliness finishing slabs, manufacturers must provide a quality certificate. If the owner of the house plans to install facade panels with his own hands, then the complexity of the work must be paid attention to first of all. Products with individual properties must meet the requirements fire safety, have an appropriate appearance and an acceptable price.

Types of facade panels can be as follows:

• single-layer;
• two-layer;
• three-layer.

Single-layer decorative products for facade cladding are lightweight, low weight, and have low building insulation properties. The use of two-layer panels for finishing the facade of a house is effective, since insulation is attached to the outer layer of the product. Three-layer products are a design typical of sandwich panels, which have 2 protective layers with insulation between them.

Properties of metal cassettes for facades

The facing panel in the form of a Puzzleton façade cassette is a hinged ventilated mount. Puzzleton is not the name of the manufacturer of the product, which must be installed at a certain distance from the wall surface.

In appearance, Puzzleton façade cassettes resemble segments with strict geometry. Square, rectangular or triangular shapes of facade panels, the types of which depend on the material of manufacture, are relevant for houses with a complex configuration. The technical characteristics of cassettes depend on the materials used to make them. Among them:

1. Aluminum, which is easy option, which may involve the application of a polymer. It does not create a large load on the walls of the building facade.
2. Brass, which does not require additional painting, has a yellowish tint.
3. Copper, which is the most expensive and corrosion-resistant material with a long service life, retains its qualities without additional processing.

Facade cassettes for cladding the outside of a house have a lot of advantages, not just positive technical characteristics. This:

• big choice colors of material;
• protection of the building facade from precipitation;
• reliable sound insulation of the house due to multi-layer finishing;
• absence of thermal deformations, which do not depend on the method of fastening the cassettes;
• preventing the occurrence of mold and diaper rash on the walls due to the presence air gap between the facade and the cassette;
• fire safety of metal profiles, preventing the spread of fire;
• no need for preliminary alignment walls before installing cassettes;
• availability of strict geometric shapes, significantly speeding up installation;
• the ability to install cassettes at any time of the year and at different temperatures;
• the low weight of each individual segment does not create additional load on the façade;
• the shelf life set by manufacturers for products is about 50 years;
• the ability to replace a damaged façade cassette without dismantling the entire cladding.

Finishing a house with facade cassettes allows you to give a new appearance to an old building. Products are made from stainless or polymer-coated steel, aluminum, copper or brass.

They should be mounted on a special frame, mounted from below, from the left corner.

Facade cladding with fiber cement panels

The rating of facade panels made from environmentally friendly raw materials includes fiber cement boards, which occupy not the least place in popularity. The products contain 90% cement, so they can be used to decorate not only high-rise buildings, but also private houses and cottages. Panels made using reinforcing fibers and mineral fillers have high strength.

Facade cladding panels gain strength due to materials such as cement, sand, and reinforcing fibers. Finished products are characterized by durability, resistance to rotting and corrosion, and fire resistance. Reliable fiber cement parts have a lot of positive characteristics.

The cladding board, which is based on cement, contains mineral additives and cellulose fibers that act as binding elements. The latter increase the flexibility of the product and reduce its deformation. Stone chips or acrylic are used to cover the surfaces of finished products.

The performance qualities of fiber cement boards correspond to fire safety. The products are not affected by temperature conditions; they are able to create reliable protection against heat loss. Such slabs are very often used in the construction of residential buildings.

The disadvantage of finishing with cement-based panels is the large mass of elements. Weight standard plate can be up to 30 kg. To fasten the panels to a special metal profile frame, a vertical and horizontal method. Achieving reliable fixation with the bracket is ensured by using a paranitic gasket.

The technology of cladding with fiber cement boards involves thermal insulation of the house using basalt wool or polystyrene foam. The material must be laid between the frame guides and secured with dowels.

The panels are fastened to the frame using self-tapping screws or clamps.

Application of facade panels made of plastic

External wall cladding does not always make it possible to use natural stone due to its significant weight and complexity of installation. As a replacement for creating cladding made of stone and brick, panels that imitate them are suitable.

Polypropylene slabs are widely used in the process of finishing the base, as they are resistant to moisture and rot, are light in weight and easy to maintain. Base panels made of polymers are easy to install. Facade cladding material can withstand any weather. Fiberglass slabs can imitate the finish of brick, marble or wood.

They are durable and reliable, their service life can reach 50 years.

If you cover a house with plastic panels, the cladding will not collapse under the influence of temperature changes, high humidity or impact ultraviolet radiation. Plates reinforced with fiberglass are not afraid of mechanical stress, thanks to acrylic coating The color stability of the cladding is achieved.

Panels for finishing facades can be strengthened in the following ways:

• on glue;
• on the sheathing.

The latter installation option allows you to simultaneously insulate the house from the outside. The properties of plastic panels must correspond modern requirements. Among the main advantages of plastic products are:

• saving money on heating;
• air ventilation;
• resistance of products to fading, cracking and corrosion;
• ease of care;
• ease of installation and the ability to install panels in any weather;
• protection of walls from outside negative impacts external environment;
• wide selection of textures and shades;
• aesthetic facade;
• long period of operation, reaching 50–100 years.

Decorative facade panels made of polymers are presented in a rich assortment on the market, which provides buyers with scope to realize their creative ideas. Facade cladding with plastic panels should only be done on smooth walls. If there are significant defects and level differences, the frame should be made of a metal profile or wooden blocks. During installation, it is necessary to leave 3 mm gaps between products. This is provided for thermal expansion; the self-tapping screw should also not be tightened all the way. The remaining cracks should be sealed with sealant.

Modern vinyl siding is the most common type of ventilated exterior finishing of the facade of a house made of sip panels. This material is suitable for cladding low-rise buildings. PVC siding is widely used for finishing bathhouses, garages, outbuildings on the site, gas station buildings, etc.

PVC siding panels have a beautiful appearance. They do not burn or rot, can protect walls well from the effects of precipitation, are easy to install and have a long service life. The wide range of colors of vinyl siding panels allows you to successfully select the necessary colors, allowing you to implement a wide variety of artistic solutions when decorating house facades. Listed below are the main advantages of modern vinyl siding used for facade cladding work:

• ease of installation;
• affordable price;
• moisture resistance;
• service life up to 50 years;
• resistance to biological effects;
• possibility of replacing damaged parts;
• providing UV protection by adding special components to the material.

The use of finishing facades with polyvinyl chloride siding panels has its disadvantages. They are associated with the appearance of brittleness of the material in the cold and vibration in strong winds. As a common decor when cladding a house with siding panels, products that imitate planks of wood are used.

The plastic panels are fastened to the sheathing. Before installation, a starting strip is installed into which the initial row of panels is inserted. A locking connection is provided for fastening the elements. Cladding panels for the facade of the house are mounted using self-tapping screws due to holes screwed in the middle.

The caps of the fastening elements are not tightened by 1 mm.

The use of thermal panels for external cladding of houses

Decorative cladding panels combine aesthetic function with insulation. They are characterized by the following structure:

• outer layer of clinker or ceramic tiles;
• heat insulator;
• protective film.

The dimensions of the thermal panels are quite large, so finishing is carried out in short time. Polystyrene foam is used as a heat insulator, which reduces the cost of the slabs. When burned, it can release harmful toxic substances. Expanded polystyrene, which can be used as insulation, gives structural strength, is safe, and does not absorb moisture. Facing with such finishing material has a number of advantages:

1. Possibility of installing the product on a surface made of any material.
2. Durability of cladding.
3. High level of heat and sound insulation.
4. Possibility of installation within all year round. Can be used in harsh climatic conditions.
5. Fast installation due to large dimensions and reduced number of joints that act as cold bridges.

Each façade panel is mounted on the wall and then secured with dowels. The elements are connected using a tongue-and-groove system. Installation on curved façade walls requires preliminary filling of the frame; installation takes place on the sheathing.

Finishing of facade panels is carried out according to the principle of assembly of the designer due to the presence of a well-thought-out locking mechanism. Fastening individual elements carried out on the basis of a tongue-and-groove connection with a slight overlap. This helps eliminate cold bridges. The installation phase requires certain financial investments.

They will pay for themselves by reducing heat loss in heating season almost 2 times.

In summer, thermal insulation should function like a thermos. If cool air is released in the evening, it will remain throughout the day. This will eliminate the need to turn on the air conditioner frequently.

Advantages of sandwich panels for facade finishing

To ensure that a façade finished with cladding elements effectively retains its thermal insulation qualities, you can use sandwich panels. The characteristics of these materials are 30% higher than those of competitors. The structure of facades lined with sandwich panels includes 3 layers: a rigid polymer or metal shell on 2 sides and insulation. You can use the following as a heat insulator:

• inexpensive, moisture-resistant polystyrene foam;
• non-flammable mineral wool;
• polyurethane foam, characterized by the absence of toxic substances and having the best parameters thermal insulation.

The shell of sandwich panels is often made of galvanized steel. Corrosion protection with a layer of zinc makes the cladding more durable and strong. The metal can be painted in different colors, so any homeowner can choose the finish to suit their own taste. Among positive qualities Sandwich panels note the following:

• speed of installation and replacement of plates;
• low weight, facilitating transportation and installation;
• high degree of sound and heat insulation;
• environmental Safety;
• affordable price.

If the exterior of the house is decorated with façade panels, they will last a long time. They require tight joining. The plates are installed on metal or wooden frame. Sandwich panels should be handled with care so that outer covering did not appear to be damaged.

Handsome and well maintained house- a subject of concern for any owner. This is especially true for those who built a house from cellular concrete or by frame technology- such buildings need cladding. Not everyone likes traditional wet finishing (plaster, paint), and it does not meet modern requirements “ good walls"(maintaining the required humidity and temperature conditions). Wood finish, even provided proper care, short-lived. Brick cladding creates a serious load on the foundation and wallet (not everyone can handle it).

The modern market offers a worthy alternative classical methods exterior finishing of the house - artificial cladding, facade panels. Among the many colors and textures, they are popular Wall panels for exterior finishing of a house under brick. Cladding with such material gives the house a finished look and at the same time protects the facade from the destructive influence of Mother Nature.

Finished house PVC panels under the brick

Types of facing materials

The panels used for facade cladding are divided into types according to structure:

Single layer. The thinnest and lightest, suitable for decorative finishing. If it is necessary to insulate the facade, they are mounted together with an insulating layer.

Double layer. They have a lower (internal) insulating layer.

Three-layer. Sandwich panels consisting of two outer layers, the gap between which is filled with insulation.

To size facade materials there are:

Composite. Small size convenient for combining colors and textures.

Whole. Due to their significant dimensions, they are easier to work with (reducing labor costs and installation time).

The panels are also classified by application (basement and facade) and by material.

Thermal panel structure

Advantages and disadvantages of artificial cladding

Covering the façade of a house with brick-like panels turns it into an elegant structure and is therefore in constant demand. The panels are widely used for finishing walls, building corners and basements: they are used to decorate fragments internal partitions and fireplaces. Each type has its own advantages, but there are also common advantages:

Aesthetic. Panels imitating brickwork give the house a pleasant and respectable appearance.

Economic. Artificial cladding of a house with brick panels is cheaper than natural analogues and has a long service life (25-50 years).

Thermal insulation. The panels help improve (to varying degrees) the thermal insulation of interior spaces.

Protective. Serve reliable protection(especially for structures made of wood and aerated concrete) from moisture, solar ultraviolet radiation and temperature changes. Prevents surface corrosion and mold.

Corner panel installation process

Assembly. Facing with facade panels on frame structure produced year-round: when installing with glue, temperature and humidity matter. At the panels simple system installation - the work is faster and easier than laying finishing bricks. Waste does not exceed 3-5%.

Operational. The brick panel is environmentally friendly and has good soundproofing characteristics. Finishing the house with brick-like panels can withstand any weather conditions, does not crack or fade.

The disadvantages include:

Plastic components are flammable and release toxic gases in a fire.

Irreversible deformation (from impact or pressure) of some varieties.

Cladding with certain types of panels is quite expensive (but still cheaper than real facing bricks).

During installation, in many cases it is impossible to do without the services of professionals - otherwise, violation of technology will affect the durability of facade panels.

Brick facade materials: review

Acrylic facade panels transform the appearance of the house

On our website you can find contacts construction companies who offer the service of finishing and insulating houses. You can communicate directly with representatives by visiting the “Low-Rise Country” exhibition of houses.

The appearance of the facade elements does not allow them to be distinguished from ordinary brickwork. Depending on the material of manufacture, they are divided into:

Plastic

Brick-like plastic panels can advantageously emphasize any style, from classic to high-tech. They refer to budget option and are made from polymer materials. The parts are small in thickness and require an additional layer of heat insulation. They share common qualities:

lightness and mechanical strength;

moisture resistance and frost resistance;

service life - 20 years.

The most common varieties plastic products are:

Acrylic facade panels. They have minimum thickness, lightweight and ideal for buildings on light foundations. The material is non-flammable, it can be mounted either on the sheathing or directly on the wall. In general, the positive impression is spoiled by the fragility of acrylic - it does not withstand mechanical loads well (it bends when hit), and can burst in cold weather.

Vinyl façade panels(two-layer facade slabs PVC). The durable bottom layer prevents the material from deforming during temperature fluctuations, while the decorative top layer repels dirt and protects from sunlight. This imitation of brick for exterior decoration of a house is in demand due to its design - reliable connecting locks.

PVC slabs in the cladding of a country house

There is a large selection on the market plastic cladding with a brick pattern. Offered textured options(worn, old, torn brick), allowing you to create unusual, memorable patterns when finishing. Thanks to large collections from different manufacturers and a variety of decorating techniques, the house receives an individual look that matches the chosen style.

Fiber cement

The panels are used both for facade cladding and in interior design. Fiber cement is a composite (contains several components) material, which includes cement, mineral fillers and cellulose fiber. All components are mixed, pressed and dried. A finishing and protective layer is applied to the resulting monolithic base.

Finishing the first floor with fiber cement

Features of fiber cement products include:

Frost resistance. The material can withstand 100-150 freeze-thaw cycles.

Non-flammability.

Flexural strength.

Environmental friendliness. Can be used in interior decoration.

Ease. The material is lighter than porcelain stoneware.

Moisture resistance(water absorption:7-20%).

Clinker finishing boards

Clinker thermal panels are ceramics for external cladding - they allow you to get a flawless facade. Composite material not only decorates, but also insulates walls. It includes:

Thermal insulator. Could be polystyrene foam mineral wool or penoplex.

Front (decorating) surface. Natural material - brick-like clinker tiles, perfectly replicating a brick wall.

Base. The layer is available in some types and is designed to facilitate installation.

Facing wooden house clinker slabs

Clinker panels have many advantages:

Significant choice spectacular flowers and textures. The material accurately reproduces brickwork. Many collections convey the aesthetics of raw, sawn or aged surfaces.

Easy installation. They are attached with glue. Additionally, the panels are secured to each other with locks and self-tapping screws (holes are provided).

Strength. Clinker facade panels are guaranteed to last 50 years.

Persistence. Panels made from high-quality clay followed by annealing do not fade and do not absorb water.

Uncomplicatedmove. The surface is cleaned with water from a hose.

Facade panels finished clinker tiles, have one drawback - considerable weight. This is a limitation for buildings with light foundations.

Polymer sand

The material for polymer sand panels is a mixture of polymer and fine sand. The tiled façade naturally copies natural brick. Finishing the facade with polymer sand parts is beneficial for several reasons:

Low cost. Polymer sand slabs are one of the most budget options.

Polymer sand facade of a frame house

Easy installation. The parts are light and flexible: they are fixed to the wall with glue and additionally connected with self-tapping screws, protrusions and grooves.

Diversity. A decent selection of colors and textures. The joints are often coated with fine-grained stone chips to enhance the appearance.

Strength. Panels are used to cover both facades and plinths.

Non-flammability. The panels are labeled self-extinguishing and contain a fire retardant.

Porcelain tiles

The material is obtained after pressing and annealing clay at a temperature of 1200-1300 °C. The addition of mineral pigments colors it throughout the mass. The properties of porcelain stoneware are:

Durability. The manufacturer guarantees 50 years of operation. Let us remember that fired clay amphorae survived a couple of millennia very well.

Strength. The material perfectly resists shock loads, abrasion and the desire of children to scratch it with a nail.

Japanese facade panels for exterior decoration of the house

Low hygroscopicity. Hardened clay does not absorb moisture and is therefore frost-resistant.

Long lasting color. Thanks to special technology, the color does not change when used in any conditions.

Facade porcelain tiles are heavy material. To cover the facade, it is hung on a reinforced metal carcass or placed on high-strength glue. At negative temperatures porcelain stoneware laid on cement mortar, peels off easily.

Base (polypropylene, polymer) cladding panels

The material for their manufacture is polypropylene resins with the addition of components that improve strength and color fastness. Brick-like plinth cladding successfully imitates natural brickwork - to tell exactly what is in front of you, you need to knock on the surface.

Brick plinth cladding

The panels have many pleasant properties:

Economical. Much cheaper than natural materials.

Quality. The manufacturer's warranty is valid for at least 50 years.

Strength. Not afraid of moisture, mechanical shocks, solar radiation, temperature changes (does not lose properties from -50 to +50°C).

Installation and operation. Finishing takes little time, and subsequent maintenance takes even less. Dirt from the base is washed off with water as it becomes dirty.

Ease. Any foundation can withstand facing with plinth panels. The weight of 1 m² of basement cladding is 3-5 kg ​​( decorative brick weighs 23 kg, artificial stone - 35 kg, finishing brick- 180-190 kg).

Video description

About the principle of installation of facade panels in the following video:

Fiberglass panels

To obtain fiberglass cladding panels for the facade of a brick house, fiberglass with resin additives is used. The panels are reliably styled to resemble brickwork and other natural materials (wood and stone) and differ in:

Long service life without repair or maintenance.

Durability (resistant to sunlight and weather vagaries).

Easy installation (and dismantling).

Facade thermal panels: high-quality cladding and reliable thermal insulation

Thermal plates or sandwich panels

Each slab has a three-layer structure - it consists of two metal (less often plastic) sheets, between which there is insulation. The elements gain strength after being connected under high pressure. Their properties include:

simple installation;

durability and good price-quality ratio;

light weight;

sound and heat insulation;

moisture resistance.

In thermal plates, the insulation is a layer of polystyrene foam or polyurethane foam; in sandwich panels, polyurethane foam, mineral wool or polystyrene foam is used.

Video description

About the process of laying plinth panels in the following video:

Finishing the facade with panels: installation methods

The installation of façade elements is reminiscent of a children's puzzle - the parts are locked together, creating a surface without visible seams. Additionally, the fastening is strengthened with the help of self-tapping screws and clasps (staples). Several installation methods are widely used:

Directly to the facade. The method is suitable if the wall surface is perfectly flat; otherwise, it is pre-aligned. The boards are attached with glue or mortar.

Cladding a house with facade material

On the sheathing. The method is suitable for most facade materials that are mounted on a prepared frame.

Curtain façade. System for ventilated facades. The structure consists of a bracket (attached to the wall using anchors), a set of galvanized steel profiles and cladding panels(thermal plates). Between the wall and the decorative panel there is space for air circulation.

Video description

About testing facade materials for flammability in the following video:

Facade finishing: installation stages

The technological chain for installing facade panels is as follows:

1. Surface preparation

On flat wall the panels are laid evenly and held firmly; otherwise, moisture will accumulate in the remaining irregularities and voids. In order for the surface to meet the standards, it:

check the building level (if the deviation is more than 2-3 cm, the walls need to be leveled);

cleaned of old coating (plaster, paint), nails;

remove protrusions and plaster recesses;

treated with protective agents (wood);

apply primer.

Thermal panels in the decor of a country house

2. Construction of the frame

If it is difficult to level the walls, metal or wooden sheathing is installed on them, and:

design parameters are calculated in advance;

sheathing pitch - 35-45 cm;

Insulation is laid between the sheathing and the facade of the house.

3. Installation of cladding

When installing façade elements, follow the following rules:

A starting (drip) strip is installed on the lower border - it levels the subsequent rows and serves to remove condensate.

The parts are mounted in rows, from bottom to top; fastened with dowels or self-tapping screws.

A gap is left between the panels and profiles, taking into account the temperature deformation of the material.

The next row is installed after the previous one is fixed (and checked by the building level).

The joints (seams) are hermetically sealed with facade grout of a suitable color.

Wall finishing with plinth panels

Facade materials: prices

The building materials market offers a variety of brick-like wall panels for exterior decoration. Cost of some materials (Moscow region):

Plastic facade panels. Wall and plinth parts measuring 0.39-0.45 m2 cost 220-550 rubles. (per piece, average price range).

Fiber cement panels. The cost is affected by the material of the coating and filler. Panels with acrylic protective layer cost from 1700 rubles. per piece, with ceramics (Japanese) - from 3100 rub.

Thermal panels. The cost is determined depending on the filler material and amounts to 1750-2400 rubles.

Thermal panels with clinker tiles. The cost varies between 1250-2300 rubles/m2.

Conclusion

Exterior decoration of a house: one of the important components of renovation, thanks to it it becomes more solid, its appearance can be changed beyond recognition, and a favorable atmosphere is created.

Among other things, finishing protects the house from aggressive environmental factors and this is another one great way creating additional heat protection if you choose appropriate panels with insulation and sound insulation.

Today, global technologies and improved finishing details are improving every day and are becoming easier and at the same time more difficult to make right choice. What are the types of facade panels? What to buy and not regret it? After all, the price of a mistake is quite high.

Kinds

We can conditionally divide facade panels into several types; most often they are made from solid and composite materials. One-piece variations are characterized by increased dimensions, reduced labor intensity, and ease of installation. Find out about MDF wall panels.

In addition, the panels are: single-layer, two-layer or three-layer. The first option is made from a single ball of material; multilayer panels are distinguished by their strength, characterized by improved thermal insulation properties and first-class performance characteristics.

In addition, regardless of the layers, all panels are distinguished by their durability; if you purchased Japanese facade panels for the exterior of your home, be prepared that they will serve you for centuries.

For more information about facade panels, watch the video:

What to choose: lightweight facade materials suitable for exterior decoration or? This issue is very individual, so manufacturers offer numerous options that should satisfy the needs of each buyer.

Panels can be wooden, plastic, metal. In addition, façade panels fainbeer are quite popular.

Regardless of the material chosen, all models, and even clinker facade panels, comply with:

• long service life;
• excellent heat protection and high performance sound absorption;
• moisture resistance;
• they are sturdy and fashionable;
• you will spend a minimum of time, effort and money on their installation;
• environmentally friendly characteristics;
• all panels look quite attractive and harmoniously decorate the house, especially if you choose the right ones plinth panels facade type;
• such structures are not afraid of rust, they are not subject to strong temperature changes, and quickly cope with ultraviolet radiation;
• There is no need to pre-prepare the walls before installation. Regardless of the time of year, you can install them;
• Deck façade panels for exterior decoration of the house are installed horizontally or vertically, it does not matter.

This type is used to repair finished buildings; they imitate a variety of elements. The disadvantages include a number of additional financial costs and in many cases you will have to use the services of skilled workers, which will make construction more expensive.

This material is perhaps the most purchased and widely used. They are also called ceramic siding sheets. This type appeared on the market relatively recently, it is based on cement with fibrous additives or with various silicates. They are produced in the form of slabs, which can vary in size.

The advantages of this type include:

• improved heat conservation technology;
• resistance to fire, moisture, temperature changes;
• reliability;
• environmental friendliness;
• various variations of shades.

Polypropylene panels: leaders in sales, and this trend has been continuing for many years. They consist of a polyvinyl chloride base, which is why they are popularly called basement sidings.

You have probably seen this material many times on many houses; it consists of many thin horizontal lines that are quickly and easily installed. The material is characterized by lightness, ease of care and affordable price.

In addition, a house decorated with such a panel looks well-groomed and stands out significantly from others. If we take into account the disadvantages, these include:

• fairly high fragility;
• you will need to additionally insulate the house, you can immediately purchase facade thermal panels;
• panels according to their own technical indicators do not combine well with other materials.

Finishing is often carried out with fiberglass sheets. They are made from fiberglass with a variety of resins added to it. . The sheet may vary in size, maximum: 3 square meters. m.

Using this material, you can choose and create any surface, even make a beautiful imitation of brickwork.

You can do it external finishing under a stone or, what is popular, under a tree and others natural materials, and for .

Among the analogues they stand out:

• original external variations;
• strength;
• reliability;
• sufficiently long service life;
• frost resistance;
• heat resistance;
• ease of installation and dismantling;
• do not change color when exposed to direct sunlight;
• resistant to water.

This type has virtually no downsides. Well, the only drawback may be the rather inflated cost.

Thermoplastic facade panels are also available on the market. The base is polyester fiberglass, which has different coatings. Thanks to this, you can realize a variety of stylistic solutions, they are very easy and quick to install, they are durable and have a unique external design. About facade plaster he will tell you about polystyrene foam.

They are not affected by rust or fungus and will serve and protect your home.

They are versatile and consist of many layers. Buyers often choose this type precisely because of its unique properties. It is quite strong and moisture-resistant, an excellent sound and heat insulator, resistant to fire, convenient and easy to install.

Varied color solutions allow you to realize the most original design projects. In addition to decorating the exterior of a house or other real estate, sandwich panels are used as insulation. There is one small drawback: relatively large readings on the scales. About warm plaster for the facade, find out by.

They are made of aluminum and galvanized materials, and they can have a smooth or perforated base. The edges of the panels for installation (with nails or screws) are also perforated.

The thickness of one ball is 0.55 mm maximum. The sheets have a protective ball made of classic and matte polyester, plastisol, pural.

Aluminum sheets are significantly lighter - weight no more than 7 kg/sq.m., but the rest have much higher resistance to temperature changes. Take, for example, facade panels for exterior finishing with a brick look, the price of which will pleasantly surprise you; they will also compete with this type. Find out about putty consumption per 1m2 of wall.

Polyester is based on polyester, which stands out significantly for long-lasting color, glossy shine and increased flexibility.

Pural is characterized by a denser structure, strength, and stability. Matte polyester – the new kind modified with Teflon, in which there is no shine.

Plastisol can be used to create a variety of textures; however, it does not react with alkali and acids. But this material has one significant drawback: it is relatively heavy when compared with other materials.

Wood-look facade panels contain wood, which breaks down into fibers under the influence of elevated temperatures. Binding component: inherently special polymer compounds that can be found in plant fiber. We are, of course, talking about lignin, which is what is released during hot pressing.

No phenol-formaldehyde resin is used at the production stage. It is the paint applied to the surface that will serve as a protective layer.. Thanks to this, during production, a three-dimensional wood or any other pattern chosen by the clients is applied to the paint.

As a result, during installation, the material cannot be visually distinguished from natural wood. The panels can be processed in the future, they are sawn, drilled. Now next time you will accurately determine which house is made of natural wood and which is not...

Significant disadvantages of this type of panels include low fire resistance. Flammability class G4 and deformation under high humidity. Therefore, this material is not often seen decorating someone's home.

Buyers are attracted by the fact that their coating - a hydrophilic inorganic film - cleans itself. This board contains cellulose and plastic fibers (their figure is 10%). The composition also includes cement and mineral fillers (their percentage equals 90%).

This type is used both at the stage of repair, facade works, so they are often used to insulate a ready-made base, on. Installation of panels should be carried out using a system made of metal or wood, and the parts should be secured with clasps. Read about exterior work using wood putty.

Facade ceramic panels, the sizes of which you can choose yourself, based on the calculations carried out, are another type of panels that are available on the market today.

Ceramic panels are often chosen for areas with increased windiness and possible shock loads on the façade.

This panel is 0.1 cm thick. Such slabs can be mounted in many ways, but for safety reasons they should be glued. For this, take polyurethane glue with two components.

PVC

A frequently used home cladding, because the finished layers consist of polyvinyl chloride polymer. In addition, modifiers, stabilizers and other components are added to future formations. Vinyl facade panels can be easily connected and combined with each other, creating frames of the selected dimensions.

These sheets are based on Portland cement. The filler is replaced with small shavings; in addition, there are special components that help improve the performance characteristics of cement.

This material is very resistant to moisture. According to GOSTs, a slab, after lying in water for a day, will swell by only one or maximum two percent. Accordingly, this material does not rot, even if it is in constant dampness.

Conclusion

Everything described above applies to façade finishing panels. They are popular among buyers due to their excellent performance and large assortment.

The price of facade panels for exterior decoration of a house will pleasantly surprise you. In order not to wonder, you need to understand that the panels attract the buyer with a variety of textures, in contrast to plaster, shades of color and performance indicators.

In addition to numerous advantages, facade panels for the exterior of a house alta profile serve to insulate the house; the material retains heat and acts as a protective mechanism against the penetration of cold air.

VOX facade panels are modern facade, Impact-resistant, resistant to changes in weather conditions, and correct installation ensures proper ventilation of the facade.

CanadaRidge (material information) / Price list (prices for Canadaridge façade panels

Zierer (material information) / Price list

Casa Verde (material information) / Price list

Casa Verde façade thermal panels (material information) Price list

On construction market presented a large number of materials intended for cladding facades, however, the numerous advantages of ventilated systems bring them to a leading position. The advantages of modern facade structures are comfortable operation, ease of installation, assortment and stunning choice of color, texture and shape.

The facade panels offered by Euromet are made from materials that are easy to machining, and represent the optimal combination of technology and efficiency. Give the required form The panels are simple, they are fastened with screws, staples and construction nails, and before finishing there is no need to specially prepare the walls. Work on façade cladding with panels can be carried out at any time of the year.

Facade panels are the standard of quality and style, and have high performance properties:

• Resistance to aggressive influences environment and sudden temperature changes, corrosion and rotting.
• Easy to maintain - during operation there is no need for additional painting or repair work.
• Effectively protects your home from exposure to sunlight, precipitation and moisture.
• Light weight and, as a result, wide application possibilities - cladding walls, individual building elements, pipes, passages, built-on floors. They can also be used for interior decoration.
• Aesthetic appearance and ample possibilities for the designer’s imagination.

Facade panels come in different types. Among the most popular are metal panels. They are made of aluminum and galvanized steel, and are one of the most economical ways façade cladding. Thanks to the lightness metal panels installation costs are reduced. Metal facade panels are plastic, and therefore they can be used to cover the walls of any building, choosing the appropriate texture and color for finishing the facade in the chosen style.

Innovative façade panels are made of polyester fiberglass, which has high impact-resistant and strength characteristics. All raw materials are dyed in bulk, which gives the product a high-quality and uniform color. The surface layer of the finished panel is processed additionally. The famous Zirer is produced in this way.

Facade panels are made from Docke-R polymers using the injection molding method, creating a stylish and sophisticated cladding that will give the house the appearance of a medieval castle or a modern brick building. Such panels are used both in private housing construction and in the construction of socially significant objects.

NAILITE facade panels are made from polypropylene-based resin - the cladding has increased resistance to aggressive environmental influences and will serve you for many years.

When installing a ventilated facade, the panel is installed both on the sheathing and on the wall. Fastenings can be visible or invisible depending on the installation technology. But in any case, the facade panels form the image of the building, giving it special sophistication and nobility.