Brick-like tiles for exterior finishing. Brick-like facade tiles. Where are these tiles used?

Building finishing facing bricks– the task is quite complex, time-consuming and expensive. Much more often, lighter, but no less durable, brick-like facade tiles with self-tapping screws are used for these purposes. Having a lot of advantages, this material is no different in appearance from ordinary brick products.

Let's take a closer look at what it is, what varieties are available on the building materials market, and the advantages and disadvantages of individual types.

Basic requirements for exterior finishing

To ensure the appearance of the building for a long time remained attractive, as well as to protect load-bearing structures from external influences, to facade materials there are a number of requirements:

• Tiled parts must have sufficiently high strength.
• The degree of water absorption largely depends on the density of the material. For external elements it should be very high so that moisture does not get inside.
• Resistance to temperature changes is especially important for facade finishing. It needs good frost resistance.
• The appearance of the facing material has great importance, since this is the “face” of the building.
• Resistance to action sun rays will allow the cladding not to lose its attractiveness longer.

A long service life without losing its technical and aesthetic data is also very important. Reconstruction of a façade is an expensive and time-consuming undertaking.

Advantages of tile materials

Visually, façade brick tiles are no different from large-sized cladding parts.

At the same time, it has a number of undeniable advantages over it:

• Weight– compared to ordinary bricks, tiles have significantly less weight. Therefore, the load on the building foundation is reduced.
• Duration of cladding building when using tiles is significantly reduced.
• Most tile materials can be installed all year round , regardless of the construction season.
• Easy to install elements– you can successfully decorate a house with them yourself.
• Most tile products are easy to saw and sand ordinary power tools.
• Resistance to temperature changes and atmospheric influences allows the parts to last quite a long time.
• Wide variety of colors and textures makes this material very attractive.
• Improving thermal insulation and sound insulation parameters buildings after cladding.
• Less thickness, compared to conventional facing bricks, allows for more aesthetically pleasing finishing of arches and openings with non-standard configurations.
• Price– tile products are much cheaper than facing bricks.
• The possibility of using such materials for the repair and reconstruction of old buildings.
• Long service life of products.
• Possibility of covering walls made of any materials.

The environmental friendliness of the material is due to the absence harmful substances during manufacture.

High durability decorative elements to fire is also an important factor when choosing material for facade decoration. Finishing tiles Excellent for installing ventilated and insulated facades.

Types of tile products

Brick-like facing tiles for the facades of buildings and structures are very diverse. It can be artificial: made from decorative concrete, or natural from ceramic materials.

Natural by type of material facing products are divided into:

• Ceramic for external use;
• Clinker;
• Porcelain stoneware;
• Hand molded;
• Made from antique brick.

The variety of textures of this finishing material allows you to choose your own option for almost any building:

• Smooth;
• Crushed brick;
• Aged brick;
• Other types of relief texture.

Various pigments and additives that are used in the production of decorative tiles make it possible to obtain a wide variety of color combinations. And this makes it possible to choose a finish to suit every taste. Both single-color and multi-color options are available.

Ceramic

Conventional ceramics are more suitable for interior decoration premises. But currently some manufacturers produce quite resistant ceramic products, which can be used without problems for external cladding facades.

They are made from high-quality red clay using various additives.

Such materials have a fairly high resistance to temperature changes and atmospheric influences.

Clinker

To make clinker products, special types of clay are used, which, after molding, are fired at very high temperatures. The result of this process is elements with a completely sintered surface.

Facade brick-like clinker tiles have all the technical parameters face clinker, has exactly the same appearance:

• High strength;
• High density;
• Low water absorption;
• Chemical resistance;
• Long service life.

Installation of these products on facades made of any materials is carried out using building mixtures. The color range of elements mainly depends on the firing temperature.

Porcelain stoneware

Brick-like porcelain tiles are made from a variety of clays, feldspar, sand, mineral additives and dyes. Firing of products is also carried out at high temperatures.

Such tiles practically do not absorb water and are highly durable. In addition, it is frost-resistant and has excellent wear resistance properties.

Due to their significant weight and good bending strength, such products are produced very thin: from 3 mm.

Hand molded

Thanks to the process of molding the mixture by hand, it turns out to be unique in terms of frost resistance. facing material. The pores in it are unclosed.

For this reason, water does not linger in them, and when frozen, it is evenly distributed along the pore channels. With repeated cycles of freezing and thawing, the material does not collapse and does not lose its characteristics.

Manual molding of products allows you to obtain extraordinary color schemes and tile textures. For self-made such elements are applied Silicone forms under the brick. The porous structure has good adhesion to mortars.

Excellent thermal insulation parameters and a high degree of vapor permeability make these products very popular in finishing.

Made from antique brick

Ancient ceramic products differ from modern materials in their higher strength and workmanship. The source of these materials are old buildings that have no historical value, which are manually dismantled.

Facing elements of this type are obtained by cutting old bricks using special equipment. Possessing all the properties of brick itself, tiles are much thinner and lighter.

Application area

Facade tiles can be used for various purposes:

• Cladding of new facades of buildings and structures.
• Reconstruction of old buildings.
• Interior decoration.
• Decoration of fences.

Such products are quite often used in landscape design.

Restoration finishing

Finishing with decorative brick tiles is carried out not only at the stage of construction of new buildings. Reconstruction and repair of old houses, additional insulation of load-bearing structures with subsequent cladding also widely uses such material.

In the case where the load-bearing structures of the building still have a sufficient margin of safety, it is not necessary to demolish the building because of its unpresentable appearance. Beautiful finishing material able to completely transform the appearance of the entire structure.

For renovations using facade tiles, the material from which the walls of the old house are made does not matter, and this is a big advantage of its use.

Dry installation

Decorating facades with facing tiles is possible in two ways: using building mixtures - wet laying, and using fasteners - dry method. Let's take a closer look at the cladding device without the use of solutions.

Lathing

The lathing is selected depending on the material load-bearing structure. It can be made of stainless steel or wood: 50 x 50 mm timber or edged board.

• The construction of the sheathing begins with the installation of horizontal elements for laying insulation. If used for this purpose wooden materials, then they must first be treated with antiseptic compounds.

Important! In order for the insulation boards to fit tightly, without gaps, the distance between the bars or profile should be slightly less than the width of the material.

• Insulation is placed between the sheathing parts.
• Next, using a construction stapler, a membrane film is fixed on top of the insulating boards to protect the building from the wind, as well as as a vapor barrier and moisture barrier.
• At the next stage, the vertical elements of the sheathing are fastened. They are installed in steps that depend on the size of the facing parts.

After installing the entire sheathing structure, you can begin direct cladding with facade tiles.

Facing

Most often, facing materials are mounted mechanically without the use of wet mixtures, such as plaster.

This way they can be installed on load-bearing walls from:

• Concrete blocks;
• Brick;
• Foam blocks and gas silicate;
• Tree.

Brick-like façade tiles are fixed to the sheathing using various types of fasteners:

• If the load-bearing walls are made of wood, then self-tapping screws with a length of 75 mm to 110 mm are used.
• For brick structures, dowel-nails ranging in size from 100 mm to 140 mm are used.
• Walls made of foam blocks and gas silicate will require frame anchors with a length of 90 mm to 152 mm for fastening.

Installation of tiles begins from the bottom corner of the building.

• The first element is attached using four fasteners to embedded galvanized steel plates, which are installed during operation.
• The next tile is locked into the lock with the first and secured with two fasteners.
• Each stage must be controlled by level to ensure that the masonry is strictly horizontal.
• Additional sheathing is installed in the corners of the house, which overlaps the main one.

This results in a durable and reliable cladding structure.

To make the façade of a house more interesting and attractive, corners and openings are often covered with tiles contrasting with the main color.

Calculation of the cost of cladding

Price decorative cladding made from brick-like tiles is definitely much lower than when using facing bricks.

• The facing material itself.
• Lathing – metallic profile or wooden materials.
• When using wood - the price of fire retardant and antiseptic impregnations.
• Fasteners.

If the facade of the building is additionally insulated, then the cost of insulation and film membrane must be added to this. Installation costs are included in expenses when you do not plan to do the work yourself.

Summary

Brick-like façade tiles will make any building beautiful and elegant. The richness of the choice of colors and textures of this material will allow you to cladding the house not only in classic style. You can bring to life the most original and non-standard solutions.

Correctly selected materials and manufacturer's instructions will allow you to give the building a modern and presentable appearance. The video in this article will show in more detail the stages of installation of such materials.

Currently, there are various types of brick tiles, which differ as appearance, and performance qualities. Therefore, beginners are often interested in which material to choose in this or that case? I suggest you familiarize yourself with the most popular types of tiles and their features, which will allow you to answer the question posed for yourself.

Types of tiles

So, currently you can find it on sale the following types facing materials imitating brick:

Option 1: clinker

Clinker tiles most reliably imitate Various types bricks If it is glued well, then you can distinguish it from natural material impossible.

Moreover, this product resembles a brick not only in appearance, but also in its performance qualities, due to which it can be used not only for interior decoration, but also as facade tiles.

Advantages:

• Durability. Many manufacturers guarantee a material service life of 100 years even for outdoor use;
• Moisture resistance. The coating is not afraid of direct contact with water and even detergents, therefore can be used for an apron. True, in this case it is advisable to varnish the tiles, since they have a rough, porous surface that is difficult to wash;

• UV resistance. The material does not lose color throughout its entire service life;
• Environmental friendliness. Made from clinker clay and does not contain harmful substances;
• Large selection of colors and shades. This allows you to choose the material to suit any interior and every taste.

Laying tiles under brick is carried out in the same way as ordinary ceramic ones, i.e. with mandatory alignment of seams and position relative to the vertical. The only thing is that each row must be glued offset to imitate brickwork.

Flaws:

• High price. Clinker decorative tiles is the most expensive imitation brick;
Like other ceramic products, this material does not like impacts, which can lead to chips and cracks.

Price. Below are the prices for clinker tiles that are current in the summer of 2017:

Option 2: tiled

Ceramic tiles are usually used exclusively for internal use. Most often it is used in bathrooms and kitchens.

As for design, it is usually performed under white brick, but you can also find material in other colors - black, red gray, etc. The surface can be glossy or matte.

Thanks to smooth surface The coating is easy to clean, making it great for the kitchen. Otherwise, the performance properties are the same as those of clinker tiles. The only thing is that the durability is somewhat less, since the surface gets scratched over time and loses its attractiveness.

Advantages:

Option 3: porcelain stoneware

Porcelain tiles are in many ways similar to tiles, but they are made from high-quality clay and ground rocks, making it more resistant to mechanical loads, as well as negative impacts environment. Therefore, it can be used not only as internal, but also as external tiles.

In addition to strength and durability, this material has almost all the qualities of clinker and tiles. As for design, the product can imitate brick, torn brick and stone.

Price:

Option 4: plaster

Gypsum tiles are a fairly light and beautiful finishing material. He can imitate too different kinds bricks and a natural stone.

Advantages:

• Low cost. Products made from gypsum are cheaper than ceramic analogues;
• Regulates humidity. Gypsum absorbs excess moisture in the room and releases it back when the air is dry.

Flaws. As you might guess, this material is used exclusively for interior decoration. Moreover, gypsum is not resistant to moisture, so the product can only be used in dry rooms.

Installation instructions gypsum tiles does not allow the use of conventional tile adhesive. Therefore, it is necessary to purchase special gypsum glue or “liquid nails”.

Price:

Option 5: composite

Composite or flexible tiles represents modern material, which consists of two components - marble chips and acrylic binder. Thanks to the latter, the product is truly flexible, which gives it some advantages over the products described above.

Flexible brick Easily cut with regular scissors

• Possibility of finishing surfaces of complex shapes. This tile is easy to decorate columns, arches and other similar structures with your own hands;
Flexible brick does not crack even with strong impacts.

Flaws. The downside of the product is its fairly high cost.

Price:

Conclusion

We have looked at all the most common materials that imitate brick, and now you just have to make your choice. To do this, watch the video in this article. If you can’t decide, write comments, and I will be happy to help you.

If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!

Methods of cladding internal and external surfaces premises are constantly being improved. They bring modern elements decor, utility, ease of care. All this fully applies to “brick” cladding.

And if at the very beginning this technology was used to a greater extent during external, facade works, then now it is popular in the arrangement interior design apartments or non-residential premises.

Features of decorative material

One of the ways to make a building unique is to cover its facades with tiles. The rectangular, strict forms of this material create visual appeal against the backdrop of the urban ensemble. But decorative tiles are most suitable for indoor interior design.

It can be used as a solid canvas covering the wall, or as individual elements designer ornament. Moreover, you can veneer not only the walls themselves, but also fireplaces, niches, shelves, door and window openings.

Advantages of brick cladding

• ease of installation, which is ensured by the ability to easily file a fragment and adjust its dimensions to fit Right place on a surface;
• thanks to the ease of processing individual rectangles, external and internal corners acquire an attractive appearance;
• the ability to separate different zones in an apartment or room, emphasizing their aesthetic appeal;
• allows you to eliminate internal surface defects in the room, for example, you can easily remove unevenness and other imperfections on the walls;
• the ability to choose the color and texture to suit every taste, place an order for production according to the sample you like;
• strength and durability in use;
• ease of care and the ability to be used in decorating various premises.

Varieties of decorative tiles

For those who want to give their home interior The uniqueness and originality of brick tile finishing is wonderful design solution. Moreover, this is facilitated by the wide variety of available materials.

Ceramic tile

Many people unfairly accuse this type of solution of having little originality. But that's not true. Clay is used for production. It is mixed with quartz sand, as well as various carbonates and dyes. Products can be given a wide variety of surfaces and colors that are most suitable for a specific interior can be selected.

For interior decoration, you can purchase a “brick-like” material that has a smooth, glossy or rough surface, and also add an antique effect to the interior.

Advantages of ceramic material

• lightness in weight;
• increased strength and durability;
• low water absorption rates;
• excellent frost resistance and resistance to fading under the influence of sunlight and aggressive environments;
• safety for humans.

Ceramics are used in the kitchen, in hallways, in places where it is necessary to carry out brick imitation, since using real brick would be irrational. For example, for decorating loggias, balconies, fireplaces or arches.

Clinker finishing

The high strength of the material made from refractory clay, combined with increased lightness, allows it to be used for cladding facades and foundations.

Clinker tiles are very elastic and resistant to external aggressive environments. She will help you give the façade original look, saving significantly on costs.

But even indoors, such decoration will look very original. You can easily verify this by looking at various photos of such brick-like tiles.

It goes well with many interior design styles and can be used together with other types of finishing - plaster or wallpaper. For example, products white are widely used in the arrangement of premises where the loft, modern or country style was implemented.

Cladding with gypsum tiles

This material is somewhat inferior to the previous ones in terms of frost resistance and resistance to external influences.

Brick-like gypsum tiles are not used in rooms with high level humidity or severe temperature changes. She also demands additional protection, for which it is often coated with a special varnish.

But we should not forget about important decorative benefits. The surface of the material is easily coated with coloring compounds, so you can give the tiles any color, for example, decorating them to look like real brick, giving them an antique effect, or choosing an original white color. Low weight eliminates significant load on the surface being coated.

The use of gypsum tiles will not harm human health. At the same time, a sufficiently high level of heat and sound insulation of the premises is ensured, the interior of which will become cozy and comfortable.

Installation specifics

Any craftsman with the appropriate skills can handle facing with brick-like tiles. But the work must be carried out as carefully as possible, without ignoring even the smallest details in installation technology. This way, a novice master will be able to create an attractive and original interior in room.

Preparing the base

The smoother the surface, the better quality of cladding you will be able to carry out. All things and furnishings should be removed from the room or carefully covered. protective film. After this you need to remove the old one decorative layer, and evaluate the opened plane for the degree of strength and smoothness.

Any loose layer of plaster must be removed. It is recommended, if necessary, to plaster the surface and then prime it. After drying, you can begin work on laying tiles under the brick.

Laying works

Installation is carried out using mortar or glue. The mixture can be applied both to the rough surface of the “bricks” and to the wall. The process of preparing the mixture itself is simple:

• the dry substance is poured into a container and diluted with water;
• after mixing and obtaining a homogeneous mass, the composition is left for some time in the container;
• the mixed solution will be ready for use.

It should be remembered that if you plan to tile areas that will be heated, for example, a fireplace, then it is advisable to use cement mortar, able to withstand high temperatures.

For the work, use regular and notched trowels, grouting tools, a rubber mallet, and a jointing strip. You should also prepare rags.

The solution is applied to the selected area and the surface of the tile in a thin layer of half a centimeter. It is advisable to carry out work starting from the corners of the room and moving towards the center.

When laying, the tile block is placed next to the place of its permanent installation and slowly moves to a given point. This way you will be able to increase the degree of grip. If necessary, you can gently tap it with a mallet. After a row of bricks has been laid out, the excess mixture should be carefully removed. Use the level to evaluate the quality of work.

Grouting joints

Many people forget about the importance of this stage of cladding. But it matters because it affects the aesthetic appeal of the surface. This should be done after the blocks are firmly fixed.

The space between the rectangles is filled with mastic and then treated with a damp rag or sponge. It is recommended not to fill the seams completely in order to highlight the contours of the bricks.

Tiling with brick-like decorative elements helps make the interior of your home as cozy and attractive as possible. This material is quite durable, resistant to wear, and quality work will allow you to enjoy the appearance of your apartment for many years.

Photo of brick tiles

Tiles are used to decorate the facades of high-rise buildings and private houses. Moreover, it is perfect for both new buildings and allows you to update or reconstruct the facade of an existing house. A popular finishing option is facing tiles under the brick. It perfectly imitates brickwork, in no way inferior to it in operational characteristics. At the same time, it costs much less, installation will take less time and effort.

• has a high level of strength;
• does not burn;
• environmentally friendly;
• copes well with temperature changes;
• withstands the effects of aggressive substances;
• durable and practical.

Thanks to a wide range of colors, sizes, and shapes, brick-like facade tiles will allow you to realize any designer’s idea. High quality materials ensures the durability of the facade and its attractiveness. For ease of installation, special corners are used, which simplify the finishing of the corners of the building. The relief base provides reliable adhesion to the wall.

For facades, tiles made of porcelain stoneware, concrete, ceramics, and clinker are used. These materials differ in their characteristics, design, and cost. However, they all have one thing in common: it is difficult even for a professional to determine that this is an imitation of brick. The advantages of such cladding:

• offered in a wide range of colors, shapes, and prices;
• creates a reliable protective layer;
• practical.

Brick finishing, of course, looks no less impressive. However, it will cost much more, and the bricklaying process is much more labor-intensive.

Ceramic tile

This is the most common type of facade finishing. It is made from clay, sand, and mineral additives. Products are formed from the mixture the right size, fire them and glaze them. External covering can be smooth, embossed, matte or glossy.

Its advantages:

• durability;
• hydrophobicity;
• increased resistance to aggressive substances;
• ease of cleaning;
• affordable price.

The disadvantages of ceramics are the difficulty of installation. Preparation of the walls is required, including their leveling. Relief surface Tiles accumulate dust over time, making it especially difficult to remove dirt from tile joints.

Porcelain tiles

Porcelain stoneware allows you to give them a spectacular look, while making them durable and resistant to any impact. Advantages of coverage:

• protects from moisture and frost;
• resistant to external influences;
• environmentally friendly;
• variety of appearance.

Porcelain tiles made to look like brick look stylish and respectable. The material practically does not absorb moisture, so it is not afraid of very coldy. To make porcelain stoneware, a mixture of clay powder, kaolin, quartz sand, water. It is subjected to semi-dry pressing and then fired at high temperatures. Adding pigments to the mixture gives the desired color. The pattern on the panels is deep and the color is rich. To glue porcelain tiles, you must use a special glue.

Clinker tiles

By firing clay for a long time at high temperatures, clinker tiles are obtained. The result of this is almost complete melting of the material, which determines its unique properties. These include:

• frost resistance;
• high strength;
• resistance to mechanical damage;
• not susceptible to ultraviolet radiation.

Clinker can be used in any climatic conditions. High humidity or low temperatures will not violate the integrity of the facade. In addition, the material is very convenient to install and further use. Disadvantages include fragility, which manifests itself during transportation, and high cost.

The production of clinker tiles is in many ways similar to the process of molding bricks. Thanks to this, a unique external similarity of the coating is achieved. With the help of clinker they create the effect of an old house; it is often given non-standard shape. Clinker can be laid on any base (brick, concrete, sandstone). Availability connecting parts significantly facilitates installation, allows you to quickly and accurately design openings, arches, and any structural elements.

A type of clinker is hand-molded tiles. Its characteristics are completely identical to the material produced industrially. However decorative properties much higher. It is used to create unique European-style facades.

Concrete tiles

By hyperpressing method cement-sand mixture with the addition of natural stone, hyperpressed concrete tiles are obtained. Its production is cheaper than clinker. The front surface can be made of any color or texture. This material combines the advantages of natural stone and facing bricks:

• strength, durability;
• fire safety;
• UV resistance;
• ease of installation.

The cladding is unpretentious and has good heat-insulating ability. It is often used to create ventilated facades. When choosing tiles, you need to make sure that they are designed for conditions with sudden changes temperatures

To increase the service life of the facade, it is recommended to treat it with a sealant after installation. The procedure should be repeated periodically.

Installation features

Facade tiling is done in two ways: wet and dry. The wet method involves using adhesive composition. To do this, the surface must first be leveled with plaster. Then it is treated with a primer and then installation begins. The adhesive mixture is applied to the wall and the back of the tile. Each element is pressed into the adhesive layer, as if screwed into it until glue appears. Masonry can be done with seams or seamlessly. Collateral beautiful facade is a highly qualified tiler.

Dry masonry technology involves preliminary installation of the sheathing. This method will require additional labor and financial costs. However, it has significant advantages:

• allows you to insulate walls;
• improves waterproofing of the house;
• quickly hides base defects.

The brick facade turns out neat, looks good, and will last for many years without repairs.

A house is not only a fortress where its owners can feel safe. An important necessity from an aesthetic point of view is that wall surfaces serve as decoration for the building and attract admiring glances from others. It is also imperative that the walls reliably protect from bad weather and guarantee energy saving.

To meet such requirements, manufacturers of building materials produce various types of facing materials. At the same time, according to reviews from home owners, brick-like tiles are the most popular. It imitates natural construction material so precise that you may not notice the difference between brick walls and tiled wall surfaces.

Porcelain tiles for facade

Two types are produced from clay ceramic tiles, differing from each other in the method of production. The first option is porcelain stoneware. The material has increased strength, determined by production technology. The raw mass is pressed under high pressure and is fired at a temperature of 1300 0 C. This is a non-porous material, comparable in structure to a monolith. Porcelain tiles practically do not wear out under the influence of wind, frost, moisture and temperature changes.

The standard dimensions of porcelain stoneware tiles are 36.5×12 cm. The naturalness of the cladding is given by corner elements made using the same technology. The front side is stylized to resemble the structure of a brick, and is given a certain roughness and uneven color.

Very often tiles are made from porcelain stoneware large sizes simulating natural stone, for example, granite, travertine or sandstone, as well as brick with a torn front surface. The price of imported porcelain stoneware brick tiles starts from 1900 rubles per 1 m2. Cost of products domestic production from 800 rubles.

The tiles are attached to the wall surface wet method. That is, on a pre-leveled solid base, the products are fixed using special adhesive mixtures. It is not advisable to use small-sized tiles for arranging ventilated facades. For this purpose, products with large dimensions are used, imitating natural stone with a polished or textured surface.

Clinker facade tiles

Clinker tiles are formed from a raw mass and fired at high temperature within 36 hours. Clinker was originally intended for use on outdoors and resists well almost all destructive weather influences: rain, frost, wind and sun.

The use of clinker tiles significantly reduces the cost of building a new house. Its advantage is that it can be used to decorate walls made of gas and foam blocks. It is also easy to use clinker to renovate the façade of an old building. There is only one important condition To use clinker tiles, namely, the walls of the building must be pre-leveled, there should not be any looseness or crumbling plaster on them.

A variety of colors of clinker tiles provides ample opportunities in creating designs and performing decorative dressings and combining colors. Laying is done on thin layer glue mixture directly on the wall or on the insulation high density, reinforced with mesh.

Price of facade tiles for brick German manufacturer Stroeher ranges from 1900 to 2660 rubles per 1 m2, depending on the type of treatment and surface texture. Cheap tiles Russian production costs 2-3 times cheaper. Products measuring 240x60x6 cm can be purchased at a price of 650 rubles per 1 m2.

You can learn more about the features of laying tiles under brick in the following video:

,

Thermal panels for facade cladding

Thermal panels combine three types of building materials:

• Insulation;
• Insulating film;
• Decorative coating.

In most cases, extruded polystyrene foam is used as insulation. The front side of the panels can be lined with plastic, metal or ceramics. Finishing with porcelain stoneware or clinker imitates wild stone or brick standard sizes, different shades and textures.

The panels are made in such a way that individual bricks protrude from the sides. Subsequently, during installation, they are joined according to the principle of the designer, thereby ensuring the reliability of laying the material. In the photo below you can see how the assembly process occurs.

Advantages of using thermal panels in facade finishing:

• Can be used on any type of wall;
• High speed of installation due to the dimensions of the panels;
• Fewer seams than when tiling standard sizes;
• Possibility of carrying out installation work in any season;
• Ensuring simultaneous insulation of the house and finishing of the facade.

To cover the facade with panels, the walls are leveled with mortar or sheathing is mounted on them. On brick and concrete surfaces Thermal panels are fastened with dowel-nails with a length of 120 mm, on wooden sheathing fastening is carried out using anodized screws with a length of 100 mm. Installation starts with corner elements from the base, a distance equal to the width of the seam between the individual bricks is left between the panels.

The main share of the cost of thermal panels is determined by the finishing material front side and manufacturer's brand. Products from Dutch, German and Finnish manufacturers predominantly use clinker coating. Their cost is from 2500 rubles per 1 m2. Thermal panels from Poland are a little cheaper, their price varies from 1200 to 1700 rubles per 1 m2. Russian facing material can be purchased inexpensively even with high-quality ceramic coating, price range - from 800 to 1000 rubles per 1 m 2.

Most cheap option thermal panels up to 600 rubles per 1 m 2 with plastic coating. They are used for insulation and improvement of old buildings and apartments in multi-storey buildings. Panels are produced in the form of rectangular or square blocks of various colors with brick-like seams. How brickwork this type of material is only perceived when looking at the building from a distance.

Facade tiles under the brick allows you to realize the most original ideas when facing facades. At the same time, its diversity allows it to satisfy the price requirements of buyers of various categories.