Decoupage and chair decor: bright ideas. Decoupage furniture - examples of using wallpaper and scrap materials (102 photos) Small decoupage stool in a marine style

Chair decoupage is one of the most simple ways change the appearance of furniture without special expenses. Simple means at hand will help you decorate both an old chair that has lost its attractiveness, and a new one that lacks personality. From this article you will learn about what the decoupage technique is and how to turn a simple chair into a real work of art with your own hands.

Decoration methods

To begin with, it is worth noting that there are several ways to decoupage furniture. Overall, this chair decorating technique involves decorating the surface with interesting paper designs. This could be some kind of printout, napkin clippings or old newspapers. Using the decoupage technique, you can decorate the surface of both furniture used in the kitchen and the base of a cute children's high chair.

Depending on what result you want to get and how determined you are, you can choose different ways decor. Let's look at a few of the most popular ones.

Case design

The most gentle way to decorate a chair is to create beautiful covers. If you do not want to spoil the surface of the new wooden chair, but at the same time you want to embellish it a little, then this option suits you best.

Here you will need fabric, the chair itself and additional decorative elements. By upholstering a chair with a backrest in fabric, you will get an interesting addition to any interior.

Decorative coating

You can also decorate the chair using paint, brushes and an additional layer of varnish. This method is suitable either for those who know how to draw beautifully, turning a simple white chair into a bright interior detail, or for those who simply want to age the furniture. Paint the base of a chair or a leg, sand the surface, and you will be surprised at how beautiful the result will be.

Decoupage

And finally, the most interesting option decor is decoupage. In this case, you can get an exquisite Viennese chair or a set of colorful stools created from old chairs that are falling apart. Thin paper or napkins are used here. However, it’s worth talking about materials separately.

Materials and tools

If you want to decoupage and make your chair bright and beautiful, then you won't need any hard-to-find materials.

First of all, you should stock up on paints and brushes different sizes and width. It is also important to choose high-quality glue. You don’t have to spend money on one that is designed specifically for decoupage - even the simplest PVA will do just fine.

To apply an image, in addition to the glue itself, you will also need beautiful images.

You can choose from illustrations or cutouts you already have, or print them yourself. The second option is preferable because it gives you more opportunities to create something unique and suitable for you.

However, in order for patterns or prints to fit well on the surface of wood or metal, you should print the images on thin paper. So finished result will look as natural as possible.

As additional materials, you can take thin tape, sandpaper and all sorts of small decorative elements, for example, sparkles, shells, small buttons and so on.

Also, be sure to choose a quality clear coat to seal your results.

Features of the technology

The decoupage technique itself is very interesting. After all, with your own hands you can create a chair that looks more original and more refined than anything you can buy.

Decoupage furniture at home should start with thinking about what the final result will be. This will help you choose necessary details pictures and prepare to attach them to the surface of the chair.

Also, be sure to remember that the surface of the furniture must be treated properly. This will guarantee that the pattern will lie in an even and neat layer and last as long as possible.

First of all, experts advise sanding the chair. This process of removing old varnish will prepare the base of the furniture. Sand over the entire surface that you plan to decorate in the future. If the varnish cannot be removed or pieces of paint remain on the chair, then you should use a special grinding machine.

When old layer The varnish is removed, the chair needs to be wiped well with a dry cloth. This way you will get rid of a layer of dust and the furniture will be well prepared for further work. Next stage - applying primer. If neglected, the stool will remain rough and uneven.. Once the primer layer has dried, the chair can be painted. As a rule, some kind of light shades. It is against a background of white or pastel paint that bright patterns and images look most noticeable.

Most often, the entire surface of the chair is covered with paint. When the next layer of paint has dried, you can move on to the most interesting part of the work - decorating the chair with pictures or patterns.

Cut out all the necessary details from napkins, wallpaper, printouts or favorite magazines. The best option– cut out the parts clearly along the contour so that there are no extra white spots. If you are working with napkins, then you need to first separate them, leaving only upper layer.

Working with paper or illustrations cut out from a magazine is a little more difficult. You will need to stick a piece of tape to the back of the picture and tear it off so that the tape removes the bottom layer of thick paper. Repeat this picture a couple of times and it will become much thinner. True, there is one nuance: you need to be very careful not to damage the image itself.

When you have prepared all the necessary parts, you can apply them to the base of the chair. To do this, you will need glue and a container into which you can pour it. If this is a special decoupage glue, then it can be used in pure form. And here PVA glue needs to be diluted with a small amount of water.

It is with this glue or a solution based on it that the picture is fixed. The image must be placed on Right place and go over it with a brush dipped in glue. Process all the pictures you need to create the final result. After you have glued all the parts, it is better to leave the chair alone for a couple of hours. This will give the pictures a chance to dry and firmly adhere to the surface of the furniture.

The choice of additional materials is unlimited and it all depends on the style in which you create your creation and what you have on hand.

Also, to make the picture clearer and more detailed, you can work it out using a thin brush and paints, or highlight the contours with a marker.

Elaboration small parts although it seems at first glance to be something insignificant, in fact it changes noticeably appearance finished picture.

Once you've finished decorating the chair with paper, decorative items and paints, you can try to age the chair. This will give it a vintage feel and will allow you to use such furniture in unusual interiors, stylized in antique style. For that, to age a chair, you need to use not very hard sandpaper. Walk it through separate parts chair, lightly removing the top layer of paint.

Another interesting way change the appearance of the finished chair - use gold or silver paint.

Apply a little product to individual areas, highlighting them. This will also make the chair look like a luxurious antique with minor scuffs and damage.

The final task when decoupaging a chair is that the work should look holistic and thoughtful. All details and abrasions should organically combine with each other. When you are completely satisfied with the result and don’t want to change anything, move on to the final stage - securing the pattern. Here you will need a wide brush and clear varnish. Brush over the entire surface of the chair and let the varnish dry.

You can also additionally coat the surface with a special varnish, which after drying becomes covered with cracks. This will also visually age the stool.

Stylistic design

One of the main advantages of decoupaging a chair is that you are practically unlimited in choosing the style and design features. Having stocked up the necessary materials and pictures that will inspire you, you can create either an unusual chair in the Viennese style or a modern stool decorated with unusual bright appliqués. Let's look at a few options stylish design chairs that can inspire you to create something new.

Provence

Furniture in the Provence style looks the most gentle and elegant. To decorate a chair in this style, you will need light paint and delicate patterns consisting of images of flowers, animals or household items, made in pastel colors. Light ribbons or small beads decorating the back will help you complete this composition.

Surely you have heard the word “decoupage” more than once; moreover, you have probably seen products created using the “decoupage” technique. What is such a popular and fashionable technique “decoupage” today?

The decoupage technique is a special way of decorating products and surfaces, based on gluing a thin layer of paper designs - from napkins or decoupage cards onto the surface of objects and products, further coverage varnish them for a spectacular appearance and preservation.

Its popularity is understandable - after all, decoupage is simple technique, which is accessible to almost everyone and provides the opportunity to create original exclusive home decor items and accessories, which for the most part are not inferior in beauty and uniqueness to the products of fashion designers.

To create unique decorative elements, napkins, lace, fabric, various pictures, and wallpaper are used. This variety of materials gives exclusive opportunity bring to life the most bold ideas and designs to create an exquisite decorative effect.

Using the decoupage technique you can create more than one unique decorative item for home.

Five basic decoupage techniques

Before we start creating “masterpieces” - be it decoupage of a stool or making chairs of extraordinary beauty, let's decide what technique we will choose. There are five main decoupage techniques:

• The classic technique involves gluing a picture directly onto any surface. A layer of varnish is applied to the pasted picture, then the surface is sanded until absolutely smooth. If desired, in some cases, the surface with a pasted picture can be additionally painted, artificially aged, or even given volume;
• The reverse technique is used to decorate glass objects. And it’s called that because the pictures are pasted on the reverse side.
• The artistic technique of decoupage is the combination of pasted images and a background into one beautiful harmonious canvas, in short, the creation of a full-fledged artistic canvas;
• The decopatch technique is a technique in which a separate picture is not simply pasted onto the surface of an object or product, it is completely filled with small pieces of special paper that imitates fabric, fur, or other material. Small individual pieces are glued closely to each other, thus forming a solid background.
• Volumetric technique makes it possible to create paintings of products with relief structures. In this case, the volume is formed using the most different methods and materials.

How to choose a style for decoupage?

The choice of style for decorating pieces of furniture using decoupage technique mostly depends on the style of the interior and, of course, your taste and preferences.

An item decorated using the decoupage technique, naturally, should please the eye and correspond to the chosen design of the room.

When choosing materials, color range, motives, it is advisable to focus on those materials, colors and motifs that are present in the interior, with which they will be harmoniously combined.

To decorate the surface of an object, one of the listed decoupage techniques in a certain style and suitable effects are selected. Designers welcome the use of several techniques in the design of objects. Or you can, for example, use one technique and combine with it different techniques decorations.

If we talk about styles, the Provence and Victorian styles are very popular today. Furniture in the Victorian style is decorated with gilding and reliefs, but furniture in provencal style decorated with patination, which is artificially aged, resulting in artificial cracks and abrasions appearing on the surface.

By creating a decoupage stool in the Provence style, you will get unusual thing in the interior, it is possible that your relatives and friends will envy you. After all, using the decoupage technique, you can transform any, even the most ordinary-looking furniture, into a real furniture masterpiece.

Each of these styles has its own, individual designs and motifs. Victorian style furniture uses angels and beautiful girls, lush bouquets. Drawings for the Provence style are distinguished by their extraordinary tenderness and romance.

Most often these are pastoral motifs, wreaths of wild flowers, bouquets of lavender, bees flying over field daisies and bells, sunflowers, and small roses. In the Provence style, decorative stencils are often used to decorate furniture and walls.

Stencils are applied over paint to create simple patterns in the Provençal style.

Using the decoupage technique you can decorate any furniture. Are you tired of your kitchen set? What is the problem? With the help of decoupage you can completely transform your kitchen furniture, making it original and unique.

By choosing the right pattern and “decoupage” technique, the appearance of the set can not only be updated, but also adapted to the design of the updated room. A variety of materials allow you to create a classic look kitchen set, romantic, or maybe laconic modern.

The most popular method today, as well as many years ago, of decorating pieces of furniture with your own hands is decoupage using napkins.

With the help of decoupage you can decorate anything, you can even decorate bottles and various ordinary jars, which can later be used in the kitchen to store various spices and cereals.

Decor kitchen stools in decoupage technique

Where are items decorated with decoupage used?

Pieces of furniture decorated using the decoupage technique can be present in both small apartments, and in spacious country houses.

Naturally, a small apartment or house can be cluttered with a large number of decorative items not worth it. But, give a second life to especially beloved and expensive things, why not? Let these be a couple of things that will definitely decorate your interior.

For example, an old large bed with a high headboard can be turned into a real royal bed, made in Provencal style, using decoupage.

To do this, you just need to apply floral motifs pastel shades on the surface of the headboard and create artificial cracks and abrasions.

Decoupage of an IKEA stool will transform the stool beyond recognition, turning a simple, uncomplicated item into a chic, luxurious item. By the way, you can support updated items with frames for pictures and mirrors in the interior, decorated in the same technique as the furniture, decorative plates, lampshades, and panels.

Magic transformation - decoupage stools

Do you want to create a masterpiece? with my own hands? There is nothing simpler: follow our advice and decoupling a stool with your own hands will become simple for you and a task that you will be happy to do.

Why a stool? It's simple: in every home there is a stool that is a pity to throw away, and which is quite tired and worn out. We will give him a new life.

It would be hard to call decoupage of a stool a job, since it is real creativity and pleasure, and you don’t need a lot of materials for the transformation:

• brushes of different sizes;
• sandpaper;
• napkins with a pattern;
• glue;
• varnishes;
• primer;
• craquelure;

All listed materials can be purchased in online stores, shopping centers and specialized stores.

By the way, the master class will tell you how to make decoupage of a stool, of which you can find many on the Internet.

Almost all master classes on stool decoupage begin with disassembling the stool: legs separately, seat separately. Then each disassembled part is sanded and primed with a special primer. As soon as the soil dries, acrylic is applied on top of it, if necessary, then several layers.

All surfaces of the stool are rubbed with a wax or paraffin candle; this will make it easier to clean the surface with sandpaper in the future (this is how aged areas are artificially created). Then a layer of acrylic is applied again, and to make the stool look just like the old one, we rub some places with coarse sandpaper.

Well, now the most interesting and exciting part! We cut out an interesting composition from a napkin - it can be a floral design, it can be fruits and vegetables, it can be thematic patterns. Using PVA glue and a brush, attach the cut out motif to the surface.

If you want to artificially age the composition on a stool, use craquelure varnish. Look how beautiful the decoupage stool looks in the photo with an aged effect! Apply craquelure varnish in two layers, and each layer must be well dried.

To make the cracks on the finished product more noticeable, treat them with special bitumen, applying it for only 10 minutes. When you wash off the bitumen, cracks will appear. At the end of the “creative” work, we cover the stool acrylic varnish. In this case, it is advisable to make 4-5 layers, not for more shine, but for more protection, since you will use the stool every day.

There are many options for decorating old, but very comfortable and beloved stools! And it is not at all necessary to do everything according to the template presented or described; your best assistant is your imagination!

Source: http://www.houser.su/decoupages-stool.html

Furniture that no longer has decent looking, but it would be a shame to throw it away, because it still performs its main functions, is present in almost every home, and most often it is a stool.

You can correct the situation and give stools a second life using decoupage. Of course, all the work will require financial costs and effort, but in the end, a handmade item will appear in the house, which will delight you with its exclusivity.

What is decoupage and how can you use it to update furniture?

Decoupage is far from a new trend in the restoration and decoration of various objects, but it was used mainly by the poor who simply had nothing to buy it for. new furniture. IN modern world, decoupage is considered one of the trends in art, with the help of which various objects are decorated.

Treated stool

All decoupage work is based on cutting out small parts from various fabrics, cardboard and paper, which are subsequently glued to the base. Next, the resulting composition is painted and varnished in several layers.

This procedure allows you to completely secure the glued part to the surface and hide the joints as much as possible. The updated item can be decorated with gilding or other effects, at the discretion of the owner.

The entire decoupage procedure allows you to update or simply decorate any item.

The video describes the procedure in detail:

All necessary materials for works can be purchased in specialized stores or used to order from special sites where goods are provided to make any fantasy come true. Sketches for the blend are taken from magazines, wrapping paper, fabrics or also from the Internet.

This method can be used to decorate all kinds of surfaces: glass, porcelain, fabric, wood. This allows you to update furniture, add an intricate pattern to mirrors or dishes.

Restoration of a stool

I would like to point out that decoupage of an old stool is not a complicated process, but it does require patience. After each process of applying paints, varnishes or primers, you must wait the required time for them to dry, otherwise the stool will not look better than it was.

For work you will need

Before you begin, you need to make sure that you have the following materials at hand and at any stage of the work, you don’t have to drop everything and run to the shops:

• primer (for wood to level the surface);
• sandpaper (preferably coarse sandpaper);
• paraffin candle;
• acrylic paints (white and brown are required, but for additional finishing you can take any desired color);
• fan brushes (flat) for creating decoupage;
• special stickers or napkins;
• PVA glue;
• sponge (can be used for washing dishes);
• acrylic lacquer;
• To decorate the stool along the edge, you can purchase guipure;
• The guipure is glued using a glue gun.

The video shows how the restoration takes place:

Don't rush to quickly purchase stickers. Go shopping and take a closer look. In office supply departments, such stickers can be found 3–4 times cheaper than in specialized stores.

Preparation

1. Before you can start updating your old stool, you need to completely disassemble it.

   Disassembling the stool

2. Next, any remaining varnish that has not yet been erased during use is removed from all surfaces. The procedure is carried out using sandpaper, not forgetting the legs.
3. Since many stools are made of pressed material, the surface is likely to be rough. Don't be upset. To rectify the situation, wood primer was purchased. It is applied in 1 – 3 layers depending on the result obtained.

Each layer must be dried, on average 3 hours. Don't forget about priming the ends. In the future, this will help avoid moisture ingress and the work will not deteriorate.

For a better result, some craftsmen add a little acrylic paint to the primer ( white) and PVA glue and after each layer, lightly sand the parts.

In cases with ideal smooth surfaces the stripping and priming process is skipped.

Process

1. At the first stage, the entire surface is covered with white acrylic. Along the edge, and in small areas in the center, brown acrylic is applied.
2. After the paint has dried (about 3 hours), the dark areas are rubbed with a candle.
3. The entire surface is again treated in two layers with white acrylic and left to dry (for a day).
4. A day later, the surface is lightly rubbed with sandpaper so that dark acrylic begins to appear through the white layer. You can’t overdo it and remove all the applied layers. You want to create the effect of a slightly worn item.
5. The base is ready and you can proceed to the design itself. The intended compositional pattern is assembled from napkins. It is better to tear off fragments taken from napkins at the edges rather than cut them out. This method will make the borders of the edges less noticeable.
6. The entire composition is folded, and you can start gluing it. Here we need a brush and PVA glue. It is better to dilute the glue slightly so that it is not too thick and does not drag on the brush. Each fragment is carefully treated with glue and applied to the surface, while all irregularities are smoothed out and the folded edges are straightened. Also, you will need to carefully remove air if it suddenly gets under the fragment.
7. The entire composition is assembled and ready. To finish it off, you can create an accent color along the edges of the stool using a sponge and a pre-selected color. The lip is dipped in acrylic and the entire edge is soaked with light movements.
8. All completed stages of work are repeated for the legs.
9. After everything has dried well, all surfaces are coated with acrylic varnish. It is advisable to repeat the procedure in 2 - 3 layers, while waiting for the preliminary drying.
10. The stool is assembled, and its edge is decorated with guipure, which is more convenient to attach with a glue gun.

The video shows the restoration rule:

Other ways to update furniture

In addition to the decoupage technique, a stool can be restored in other equally interesting ways:

1. The surface of the stool changes soft upholstery. By the way, it can be created even if you haven’t had a stool before soft seat. The legs are processed as in working with decoupage (cleaned, painted and varnished). On the lid itself, a square of foam rubber and fabric is cut out 10 cm larger for the size of the lid itself. On the reverse side, the fabric is attached to the base using a stapler or small nails.
2. You can sew a regular cover made of thick fabric onto the stool. By the way, this method is also good because the cover can be removed at any time to wash it. But using this method, the stool will still need to be restored by painting.
3. And the most easy way- this is to repaint the stool. All work will take place in the same order as during decoupage. The difference is that you don't need to apply a pattern.

The video shows ways to update a stool:

As we see, there are ways to restore old stool enough, and the thing can last for a long time. But can at least one of them compare with the art of decoupage, thanks to which you can create a truly unique thing.

The purpose of decoupage is that with the help of paper pictures an object acquires a new and bright life. The technique itself involves selecting appropriate designs and gluing them onto things with special fixing solutions.

You can decorate dishes, boxes, decorative items and much more in the decoupage style. IN Lately It has also become popular to decorate any furniture in this way: tables, chests of drawers, wardrobes, chairs, and so on. This decorative technique allows you to refrain from buying new furniture and introduce individuality into your home design. Decoupage of chairs also helps to diversify the interior.

Required tools and materials

List necessary tools and materials in order to decoupage a wooden chair is as follows:

• several brushes of different widths and densities;
• decoupage glue or PVA;
• pictures (napkins, illustrations from magazines, wallpaper, etc.);
• paint (acrylic or for woodwork);
• pencils or markers (can be useful if you need to finish drawing some elements of the image);
• varnish (decoupage or regular);
• primer;
• sandpaper;
• wood putty;
• scissors;
• scotch.

Various decorative elements may be required as additional materials: sparkles, rhinestones, shells, buttons, ribbons, and so on.

Stages of the decoupage process

Decoupage of chairs occurs in much the same way as decorating other items. The process itself consists of the following stages:

• thinking through future decor, the idea of ​​decoupage;
• preparing the surface of the chair;
• background preparation;
• working with a pattern;
• decor (painting, additional elements, finishing);
• varnish coating.

The quality of each stage depends on final result work. Therefore, it is better to take your time, do everything carefully and wait for the paints and varnish to dry completely.

Idea for decoupage

Decoupage of chairs (see photo ideas above) can be done either to completely cover the surface or partially. That is, you can decorate the whole seat, back and legs with pictures. But such an appearance will be too overloaded. It is better to focus on partial decor and apply the image only to the seat or back. You can distribute small elements over the entire surface of the chair.

Think in advance about the theme of the future design, and also look for relevant pictures. At this stage you also need to choose a paint shade that matches the illustrations. After all, you need to make a background.

When the design option is ready, you can begin the work itself.

Preparing a chair for decoupage

If you decorate an unprepared chair, the decor will look ugly and will not last long. The same thing will happen with poorly treated furniture. Therefore, this stage of work must be given due attention.

First, the chair needs to be sanded, that is, removed old varnish. To do this, use a fine one. If the varnish is difficult to erase, then you will need to use grinder. It's better to work with her outdoors in a special mask. The varnish is removed from the entire chair. Then the chair is wiped with a dry cloth to remove dust.

Now you need to apply the primer. Next, it is advisable to cover the surface with a layer of putty. This is necessary to hide scratches, roughness and unevenness of the chair. You can not cover the entire surface, but only areas with flaws. When the putty has dried, the chair is coated again with primer.

Preparing the background

The paint must be applied to the primer layer. This way she will lie down better and won’t slide off. The number of colors depends on your idea. You can cover different paints the back and seat, highlight the legs and other elements of the chair with a different shade. There are many options. Remember that the main color can be anything.

Cover the entire surface of the chair with paint, leaving the areas where the design will be glued empty. These areas need to be painted light color(white or beige). This is done so that the drawing is better visible. After all, work happens with a thin layer of paper, and in 99% of cases dark paint shines through it. This makes the look different from what was intended at the beginning of the work.

After the background has dried, you can begin working with the illustrations.

We apply pictures

Prepare your pictures: napkins, magazine clippings and pages, pieces of wallpaper, printouts. As mentioned above, any paper illustrations will do to decoupage the chair.

Master class on drawing pictures:

1. Cut out the necessary decorative elements from paper. For example, if you decided to decorate a chair with roses, then you need to trim the flowers along the contour and get rid of excess paper.
2. Do thin layer Pictures. If it's a napkin, then remove the extra layers, if it's plain paper, then stick pieces of tape to the back side several times and remove it. Do everything carefully so as not to damage the illustration itself.
3. Pour decoupage glue into the container. If you use PVA, dilute it with a little water.
4. Attach to required area chair with a suitable picture and cover it on top with glue.
5. Apply all the pictures in this way.

Allow the illustrations to dry completely before finishing decoupaging the chairs.

The final stage of furniture decoupage

To decoupage old chairs into a work of art, you need to tinker with the little things. For example, you can add decorative elements such as rhinestones, beads, ribbons, buttons, and so on to the back and legs. But it’s best to still work on the drawing itself and the background:

1. Take pencils or markers and draw the outlines.
2. Take paints and thin brushes, add the background, contours, and shadows to the drawing.
3. Use fine sandpaper and scuff the edges of the chair.
4. Add gold and silver to the raised areas of the chair.
5. Walk with a wide brush, first dipping it a little into dark-colored paint, if the chair is light-colored - along the edges of the back and seat. This will also create a worn effect.

Try to do your best to ensure that the drawing and background are one. Then the end result will be amazing. If the picture stands out, it creates a feeling of incompleteness and the entire graceful appearance is lost. Therefore, it is better to lightly treat the edges of the illustration with a sponge dipped in the same paint as

To complete the decoupage of the chairs, cover it completely with varnish. When everything is dry, the products can be used. Thanks to the varnish, the design is not damaged during use and the chair can be easily cleaned with moisture.

Don't be afraid to experiment. Sometimes best works are created thanks to unexpected decisions. Over time, when your skills in the decoupage technique increase, you can use Additional materials to expand design possibilities (for example, to create decorative cracks).

The new direction of decoupage of chairs with your own hands originates in the Middle Ages. Back in the fifteenth century, housewives actively used it at home, making interior items more beautiful. It’s very simple to make decoupage yourself, the main thing is to get inspired by this direction of art, and then you can easily give a second life to old furniture.

If you decide to try this type of apartment decoration for the first time, then decoupage of an old chair and table with wallpaper will be the most suitable option. Decorations can be made from leftovers various wallpapers, which are found in almost every apartment. If you don’t find any, then you can purchase absolutely any, it makes no difference what you do with decoupage.

Decoupage table wallpaper

Before you start decorating a stool with your own hands, you must thoroughly clean it. It is necessary to eliminate all cracks and splinters, and this is best done with sandpaper or a sanding machine. The final design depends on the clean surface of the furniture, as even a small greasy spot will spoil the appearance and shorten the life of the finished product.

The easiest way to start decorating chairs is with a patchwork technique. It is the simplest and most understandable, because it uses whole pieces of wallpaper. The sheet is glued to a clean surface and left until completely dry. As a result, you can varnish the surface so that the brightness of the design does not fade over time, especially for a wooden chair.

Decoupage home furniture with napkins

Decoupage with napkins

For beginners, decorating from napkins is also a good option. Decouping a chair with your own hands in this way is not much different from wallpaper, but requires a more careful approach. You can stock up on napkins in a regular store, as well as in special departments for handicrafts. This design fits almost any apartment interior, because the variety of napkins is as large as the wallpaper.

Don’t forget to prepare the surface. The painting will last for a long time and with high quality only if the surface of the furniture is clean. DIY chairs can be presented in different styles, It all depends on your imagination. Motifs in the decoupage style can be taken on the Internet, there are various designs, for almost every type of room.

Decoupage with fabric on furniture

If you have unnecessary and beautiful weaving in your apartment, you can use it to decorate old chairs, tables, cabinets, stairs and much more. Pieces of fabric are more durable compared to paper. This design will last longer, and caring for it will be as simple as possible. The advantage is that you can not only cover home furniture with fabric, but also simply cover it.

The Crafts Fair offers thousands of home furniture finishing options. That's where you can see step by step wizard a class that will teach you how to properly control the work process, and will also present some of the subtleties of this lesson. The design of the furniture produced depends on the apartment in which it will be located. So first you need to decide on a pattern, so that in the end everything will be in perfect harmony.

Materials for decoupage with fabric Cut the fabric, coat it with glue, let it dry for 40 minutes Cover the bedside table with 2 layers of PVA glue, using a roller like this
Spraying with glue, glue the fabric to the bedside table using the patchwork technique. Decorate the drawer of the bedside table. Additionally, decorate with rope

Result

What is needed for decoupage?

How to make your furniture beautiful and original? This question is asked by many housewives. You can even decorate with decoupage high chair, because the materials used for work are absolutely harmless. A chair made using the decoupage technique will cost tens of times less than buying a new model. For standard decoration, you will need:

• PVA glue;
• napkins, fabric, wallpaper;
• sandpaper or sanding machine;
• stool, table, chest of drawers, wardrobe or any other furniture;
• washcloth;
• acrylic lacquer;
• brush.

Purchasing such a painting kit will not be difficult, and the final work will look simply amazing. Do-it-yourself decoupage of chairs, photo of which is in large quantities presented on the Internet, will excellent option to update the ambience of the apartment. Many decorate on wood because this surface perfectly accepts glue with any materials.

Now it has become fashionable to use shabby chic in the interior, a new direction original interior. In the shabby style you can decorate chairs with backs, stools, tables and chests of drawers. In this way you can even decorate a wall in a room that doesn’t stand out in any way. This style brings warm bed colors, small patterns of antiquity and the unique charm of irreplaceable wear. Such decoupage kitchen furniture with your own hands will surprise any gourmet.

Decoupage coffee table with your own hands, a photo of which is available in large quantities, can be an excellent option for a bedroom, kitchen or living room. Decoupage in Provence style can be harmoniously located in any living room, because this style is modern furniture conducive to relaxation and comfort.

You can do decoupage on a stool with your own hands in absolutely any style. Moreover, any home furniture is best suited for such restoration.

Decoupage chair

Cutting out the blanks It’s better to make a copy of the drawing and print it on a laser printer. Let the finished product dry thoroughly, and then cover it with several layers of varnish.
Using a sponge, apply PVA glue to the entire surface of the chair. To avoid possible bubbles, before placing the paper part on the glue, dip it in cold water Result

Step-by-step instructions will tell you how to decorate a chair, kitchen, bedroom and other rooms with original interior items. A room decorated in this way will delight its owners with its individuality, and most importantly, it will contain a small piece of the love with which each element was decorated. It doesn’t matter what you decide to do, decoupage stools or decoupage baby chair, the main thing is to approach this issue seriously so that the result lasts a long time and pleases the eyes every day.

How sometimes you don’t raise your hand to get rid of old and peeling furniture, reminiscent of the past, which you don’t always want to erase from memory. But it would be necessary. But you don't have to throw it away.

Decor – perfect solution for old and dull interior items.

After all, such furniture can greatly decorate the interior if its appearance is somewhat restored. Then the furniture will turn from rather boring into original and stylish accessory design.

Design options for old pieces of furniture

There are many known furniture design techniques.

This includes doing decoupage with your own hands, the craquelure technique, pasting with vinyl stickers, and all kinds of applications.

To cover a stool, it is better to use thick textured wallpaper.

Any of the techniques can be used both to decorate aged and relatively new furniture, but not too impressive in its decor. There are also many other methods of finishing furniture known. For example, painting or pasting with textured wallpaper for painting, knitting individual parts or decorating with various ribbons, ribbon, cords and cords.

For example, it makes sense to cover the seat of an old stool or the front of a chest of drawers, which cannot be cleaned in any way, with textured (vinyl) wallpaper with a convex relief pattern and then give the wallpaper the desired color by painting. And paint the legs of the stool or the side walls of the chest of drawers for convenience using an aerosol.

An old chair or stool that has no visible defects can be decorated with a design using acrylic art paints. These paints fit perfectly on Various types surfaces, including chipboard and wood. To achieve the maximum effect from their use, it is worth selecting several paints and art brushes. For example, using a wide and thick brush, the surface can be painted in the background color. And on the prepared background base, using thin brushes, apply the main decorative pattern. To obtain volume, bulges and a relief image, strokes should be applied with short movements of the brush with uneven distribution force on the hand. The more prominent the drawing is, the more impressive it will look. By combining materials, tools and different techniques for applying paint to the base, you can get a stylish surface of any piece of furniture (even the same stool seat) with a smooth mixture of shades.

You might be interested in: Beautiful kitchen made of plywood

Very good way To give the appearance of a stool a fresh look is to sew or knit a new cover. Any stool, regardless of its age, can be transformed into a chic and even exclusive piece of furniture. What will be required in this case? The first step, of course, is to choose the right one style decision kitchen area fabric/threads and either make it yourself (if you have certain skills and a machine), or entrust this task to a craftsman who can cope with any task.

Return to contents

Decorating a stool using decoupage technique

For decoupage you will need brushes, paint, drawings, glue, napkins.

Let's look at how to do decoupage with your own hands on an old stool and give it a new design.

Decorating a stool using the decoupage technique cannot be called too simple and quick. And a considerable material base will have to be prepared for it. But the transformation of an old stool into a stylish interior object, updated with your own hands, will pleasantly surprise your household. Do-it-yourself decoupage as a technique is well known, and it is quite popular, so preparing everything you need will not cause any difficulties. Acrylic paints, brushes of various sizes, sandpaper, glue, napkins, varnishes and primers, bitumen and craquelure for grouting are available in a wide range of art and hardware stores.

Return to contents

Magical transformation

So let's get started.

If you want to paint the stool, you need to apply a layer of primer.

1. Before starting work, the stool should be disassembled and the surfaces treated with sandpaper and primer.
2. After the primer has dried, a layer of acrylic (or several layers) is applied.
3. After this, the surface painted with acrylic is rubbed with a candle to facilitate the cleaning process with sandpaper.
4. Upon completion, acrylic is applied again. To age the surface a little, it makes sense to rub some places with slightly coarse sandpaper.
5. This stage is the most important, but no less exciting. From pre-cut napkin fragments, the desired composition is laid out on the surface of the stool, which is secured to the seat using PVA glue. Then it is possible to show creative imagination in the form of experimenting with paints so that you can give the composition the volume or required color.